참고문헌
- Wehrbein H, Merz BR, Diedrich P, Glatzmaier J. The use of palatal implants for orthodontic anchorage: Design and clinical application of the orthosystem. Clin Oral Implants Res 1996;7:410-6 https://doi.org/10.1034/j.1600-0501.1996.070416.x
- Melsen B, Petersen JK, Costa A. Zygoma ligatures: an alternative form of maxillary anchorage. J Clin Orthod 1998;32:154-8
- Umemori M, Sugawara J, Mitani H, Nagasaka H, Kawamura H. Skeletal anchorage system for open-bite correction. Am J Orthod Dentofacial Orthop 1999; 115: 166-74 https://doi.org/10.1016/S0889-5406(99)70345-8
- Kanomi R. Mini-implant for orthodontic anchorage. J Clin Orthod 1997;31 :763-7
- Costa A, Raffainl M, Melsen B. Miniscrews as orthodontic anchorage: a preliminary report. Int J Adult Orthodon Orthognath Surg 1998;13:201-9
- Kim YJ, Choi JH, A clinical study on intraoral anchorage using titanium miniscrew. J Kor Dent Asso 2001;39:684-7
- Ohrnae M, Saito S, Morohashi T, Seki K, Qu H, Kanomi R, Yamasaki KI, Okano T, Yamada S, Shibasaki Y. A clinical and histological evaluation of titanium mini-implants as anchors for orthodontic intrusion in the beagle dog. Am J Orthod Dentofacial Orthop 2001;119:489-97 https://doi.org/10.1067/mod.2001.114300
- Brown GA, McCarthy T, Bourgeault CA, Callahan DJ. Mechanical performance of standard and cannulated 4.0-mm cancellous bone screws. J Orthop Res 2000;18:307-12 https://doi.org/10.1002/jor.1100180220
- Nordin M, Frankel VH. Basic biomechanics of the musculoskeletal system. Lippincott Williams & Wilkins, Philadelphia 2001;390-9
- Deguchi T, Takano-Yamamoto T, Kanomi R, Hartsfield JK Jr, Roberts WE, Garetto LP. The use of small titanium screws for orthodontic anchorage. J Dent Res 2003;82:377-81 https://doi.org/10.1177/154405910308200510
- Buchter A, Wiechmann D, Koerdt S, Wiesmann HP, Piffko J, Meyer U. Load-related implant reaction of mini-implants used for orthodontic anchorage. Clin Oral Implants Res. 2005;16:473-9 https://doi.org/10.1111/j.1600-0501.2005.01149.x
- Miyawaki S, Koyama I, Inoue M, Mishima K, Sugahara T, Takano-Yamamoto T. Factors associated with the stability of titanium screws placed in the posterior region for orthodontic anchorage. Am J Orthod Dentofacial Orthop 2003;124:373-8 https://doi.org/10.1016/S0889-5406(03)00565-1
- Yerby SA, Scott CS, Evans NJ, Messing KL, Carter DR. The effect of cutting flute design on bone screw insertion and pull-out properties, In 46th Annual Meeting of the Orthopaedic Research Society, poster session, poster 0875, 2000.12-1 5
- Ryken TC, Clausen JD, Traynelis VC, Goel VK. Biomechanical analysis of bone mineral density, insertion technique, screw torque and holding strength of anterior cervical plate screws. J Neurosurg 1995;83:325-9
- Lu WW, Zhu Q, Holmes AD, Luk KD, Zhong S, Leong JC. Loosening of sacral screw fixation under in vitro fatigue loading. J Orthop Res 2000;18:808-14 https://doi.org/10.1002/jor.1100180519
- Oktenoglu BT, Ferrara LA, Andalkar N, Ozer AF, Sarioglu AC, Benzel EC. Effects of hole preparation on screw pullout resistance and insertional torque: a biomechanical study. J Neurosurg 2001 ;94:91-6
- Okuyama K, Abe E, Suzuki T, Tamura Y, Chiba M, Sato K. Can insertional torque predict screw loosening and related failures? An in vivo study of pedicle screw fixation augmenting posterior lumbar interbody fusion. Spine 2000;25:858-64 https://doi.org/10.1097/00007632-200004010-00015
- Ostman PO, Hellman M, Sennerby L. Direct implant loading in the edentulous maxilla using a bone density-adapted surgical protocol and primary implant stability criteria for inclusion. Clin Implant Dent Relat Res 2005;1:60-9
- Bambini F, Meme L, Pellecchia M, Sabatucci A, Selvaggio R. Comparative analysis of deformation of two implant/abutment connection systems during implant insertion. An in vitro study, Minerva Stomatol 2005;54:129-38
- O'Sullivan D, Sennerby L, Jagger D, Meredith N. A comparison of two methods of enhancing implant primary stability. Clin Implant Dent Relat Res 2004;6:48-57 https://doi.org/10.1111/j.1708-8208.2004.tb00027.x
- O'Sullivan D, Sennerby L, Meredith N. Influence of implant taper on the primary and secondary stability of osseointegrated titanium implants. Clin Oral Implants Res 2004;15:474-80 https://doi.org/10.1111/j.1600-0501.2004.01041.x
- Homolka P, Beer A, Birkfellner W, Nowotny R, Gahleitner Tschabitscher M, Bergmann H. Bone mineral density measurement with dental quantitative CT prior to dental implant placement in cadaver mandibles: pilot study. Radiology 2002;224:247-52 https://doi.org/10.1148/radiol.2241010948
- Frost HM. Bone's mechanostat: a 2003 update. Anat Rec A Discov Mol Cell Evol Biol 2003;275:1081-101
- Matsumoto A. Mechanical evaluation of a soft tissue interference screw with a small diameter: significance of grafthone tunnel cross-sectional area ratio. Knee Surg Sports Traumatol Arthrosc 2006; 14:330-4 https://doi.org/10.1007/s00167-005-0675-0
- Berkowitz R, Njus G, Vrabec G. Pullout strength of self-tapping screws inserted to different depths. J Orthop Trauma 2005;19:462-5 https://doi.org/10.1097/01.bot.0000161544.72757.95
- Misch CE, Qu Z, Bidez MW. Mechanical properties of trabecular bone in the human mandible: implications for dental implant treatment planning and surgical placement. J Oral Maxillofac Surg 1999;57:700-6 https://doi.org/10.1016/S0278-2391(99)90437-8
- Kim JW, Cho IS, Lee SJ, Kim TW, Chang YI. Mechanical analysis of the taper shape and length of orthodontic mini-implant for initial stability. Korea J Orthod 2006;36:55-62
- Lim JW, Kim WS, Kim IK, Son CY, Byun HI. Three dimensional finite element method for stress distribution on the length and diameter of orthodontic miniscrew and cortical bone thickness. Korea J Orthod 2003;33:11-20
- Lee JS. Contact non-linear finite element model analysis of immediately-loaded orthodontic mini implant [thesis]. Seoul, Korea: Yonsei University; 2004
- Ueda M, Matsuki M, Jacobsson M, Tjellstrom A. Relationship between insertion torque and removal torque analyzed in fresh temporal bone. Int J Oral Maxillofac Implants. 1991;6:442-7