References
- Bajpai, A., 'The Effect of Gear Geometry and Surface Finish on Measured T.E. and Noise for Several Gear Sets,' MSc. Thesis, The Ohio State University, 2004
- Houser, D. R. and Singh, R., 'Gear Noise Basic Short Course Notes,' The Ohio State University, 2003
- Dziech A.M., 'Design of a Loaded Static T.E. Tester for Non-Parallel Axis Gearing,' MSc. Thesis, The Ohio State University, 1996
- Poling A.M., 'Hypoid Gear Test Rig T.E. Measurement Enhancement and Topics in Root Stresses of Several Gear Types,' MSc. Thesis, The Ohio State University, 1999
- Bassett D.E., 'The Design and Analysis of Single Flank T.E. Tester for Loaded Gears,' MSc. Thesis, The Ohio State University, 1987
- Schutt, T.C., 'Development of a Loaded Single Flank T.E. Measurement System,' MSc. Thesis, The Ohio State University, 1988
- Foster, C.A., 'Digital Control of a Loaded Single Flank T.E. Measurement System,' MSc. Thesis, The Ohio State University, 1991
- Hochmann, D., 'An Improved Loaded Single Flank Static T.E. Tester,' MSc. Thesis, The Ohio State University, 1992
- Coleman, W., 'Guide to Bevel Gears,' McGraw-Hill Publishing Co., Inc, 1963
- Dudley, D.W., 'Handbook of Practical Gear Design,' CRC Press, 1994
- Yukon Gear and Axle Installation Kit Instructions, Yukon Gear and Axle, 2003
- Spicer Axle Maintenance Manual, Model 44, Independent Rear Suspension, Dana Corporation, 1984
- Rotec Data Acquisition System User Manual, Rotec, 1999
- Houser, D.R. and Harianto, J.H., 'The Effect of Micro-Geometry and Load on Helical Gear Noise Excitations,' SAE, May 2005
- Sadndeep Vijayakar, 'Finite Element Analysis of Quasi-Prismatic Bodies with Application to Gears,' 1987