DOI QR코드

DOI QR Code

다구찌 실험법을 이용한 OPC 드럼용 튜브의 최적설계 연구

Optimization Design of an Aluminum Tube for an OPC Drum using Taguchi's Experimental Method

  • 김청균 (홍익대학교 트라이볼로지 연구센터) ;
  • 오경석 (홍익대학교 트라이볼로지 연구센터)
  • 발행 : 2007.06.30

초록

In this paper, the optimized design and strength analysis have been presented based on the finite element and Taguchi's experimental methods. The stress, strain and displacement characteristics of OPC drum tubes are affected by rolling contact pressures between an OPC drum tube and a paper, design parameters of an aluminum tube and material properties. The OPC drum tubes with nine different geometrical models are analyzed for design parameters that are related to the outer diameter, the thickness, and the length of an aluminum tube for a toner cartridge. The optimized design parameters for an aluminum tube may be selected as the outer diameter of 28 mm, the thickness of 0.8 mm, and the length of 220 mm. But the currently used aluminum tube for a laser printer is fairly optimized based on the Taguchi's design analysis. The calculated FEM results showed that the affection ratio of the design parameter t, which may control the strength of an aluminum tube, is the most influential parameter among the length and an outer diameter of a tube.

키워드

참고문헌

  1. 김재영, '日캐논 특허권 승소,' 동아일보, Oct. 14, 2006
  2. 김용구, '세계 일류기술 하나씩 갖자', 한국경제, Dec. 6, 2005
  3. 이구순, '삼성전자, 세계 프린터 시장 '샛별' 급부상,' 머니투데이, June 4, 2007
  4. Mittal, S. and Dym, C. L., 'PRIDE: An Expert System for the Design of Paper Handling Systems,' IEEE Computer, Vol. 19, July 1986
  5. '이음매 없는 알루미늄 및 알루미늄합금 관 KS D 6761,' 한국표준협회, 2002
  6. '알루미늄, 마그네숨 및 그 합금-질별 기호,' 한국표준협회, 2006
  7. MARC Analysis,' Version K7.3, 1999
  8. 박성현, '현대실험계획법,' 민영사, 2003
  9. 김청균, 조승현, '다구찌법을 이용한 O-링의 최적설계 및 수치적 연구,' 한국윤활학회, Vol. 20, No. 5, pp. 259-265, Oct. 2004

피인용 문헌

  1. SEM/EDX를 이용한 OPC 드럼용 Al 튜브의 표면결함 분석에 관한 연구 vol.23, pp.4, 2007, https://doi.org/10.9725/kstle.2007.23.4.143