쾌속조형과 진공주형 및 세라믹 몰드를 이용한 금속 주조 시제품 제작 공정에서의 형상정밀도 변화

Variations of Form Accuracy in the Process of Metal Cast Prototyping using Rapid prototype, Vacuum casting and Ceramic Mold

  • 김기대 (대구가툴릭대학교 기계자동차공학부)
  • 발행 : 2007.06.01

초록

In metal casting process, it is very difficult to predict the form accuracy of cast part and reduce repeatability error. In this study, the variations of form accuracy were measured in the process of metal cast prototyping, where RP part is manufactured from CAD model in the first, and then, wax part is cast in the vacuum environment using the RP part as master model, and finally metal prototype is cast using ceramic mold and the wax part as pattern. To investigate the variations of form accuracy, the averages and standard deviations of error distribution of the parts measured by 3D scanner were compared. It was observed that the biggest shrinkage is generated during the extraction of wax part in the second step and the biggest deterioration of form accuracy is generated during the metal part casting in the last step.

키워드

참고문헌

  1. Ahn, D. G and Yang, D. Y, 'Principle of Rapid Prototyping and its Trends,' Journal of the KSPE, Vol. 22, No. 10, pp. 7-16, 2005
  2. Im, Y. G, Chung, S. I. and Jeong, H. D., 'Development of Investment Casting Technique using R/P Master Model,' Journal of the KSPE, Vol. 16, No. 6, pp. 52-57, 1999
  3. Jeong, H. D. and Kim, H. Y, 'Development of Rapid Tooling using Investment Casting & RIP Master Model,' Journal of Korean Foundrymen's Society, Vol. 20, No.5, pp. 48-53, 2000
  4. Choi, S. R., Kim, C. K., Park, K. and Oh, C. H., 'Development of Precision Casting Technology for Inlet Gear Box using Selective Laser Sintering,' Journal of KSMTE, Vol. 9, No. 1, pp. 30-37, 2000
  5. Kim, G D., 'Technology of Rapid Prototyping, Vacuum Casting, and Metal Cast Prototyping,' Journal of KSMTE, Vol. 15, No.2, pp. 17-21, 2006
  6. Chung, S., Im, Y., Jeong, H., Jeong, D., Cho, K., Lee, S., Choi, B. and Choi, H., 'Rapid fabrication of aluminum shoe mold using vacuum sealed casting process,' Journal of Materials Processing Technology, Vol. 142, No.2, pp. 326-333, 2003 https://doi.org/10.1016/S0924-0136(03)00588-0
  7. Kim, H. C., Lee, S. and Lee, S. H., 'Rapid Tooling Technology for Producing Functional Prototypes using Ceramic Shell Investment Casting and Patterns Produced Directly from Thermo-Jet 3D Printer,' Journal of the KSPE, Vol. 23, No.8, pp. 203-210, 2006
  8. Kim, G D. and Kim, J. Y., 'Benchmark Study on Surface Roughness and Mechanical Properties of Rapid Prototypes,' Transactions of KSMTE, Vol. 15, No.4, pp. 56-62, 2006