참고문헌
- Philip G. Blakeman, Andrew F. Chiffey, Paul R. Phillips, Martyn V. Twigg, Andrew P. Walker (2003), 'Developments In Diesel Emission Aftertreatment Technology,' SAE paper 2003-01-37531
- Dorriah L. Page, Bradley L. Edgar (1998), 'A Systems-Level Optimization Strategy for Diesel Engines,' SAE paper 981914
- Magdi K. Khair (2003), 'A Review of Diesel Particulate Filter Technologies,' SAE paper 2003-01-2303
- Kazushige Ohno, Noriyuki Taoka, Takeshi Ninomiya,Hong Sungtae, Masaaki Kojima and Teruo Komori (1999), 'SiC Diesel Particulate Filter Application to Electric Heater System,' SAE paper 1999-01-0464
- Makoto Nagata and Yasuyuki Banno N.E (2002), 'Observation of Soot Accumulation Conditions in Diesel Particulate Filter and Gas Flow Analysis', SAE paper 2002-01-1013
- Garima Bhatia and Natarajan Gunasekaran (2003), 'Heat-Up of Diesel Particulate Filters: 2D Continuum Modeling and Experimental Results,' SAE paper 2003-01-0837
- Athanasios G. Konstandopoulos and Evangelos Skaperdas (2002), 'Microstructural Properties of Soot Deposits in Diesel Particulate Traps Aerosol & Particle Technology Laboratory, 'SAE paper 2002-01-1015
- Claire-Noelle Millet, Pascal Mazzi and Brigitte Martin (2002), 'Modeling of Diesel Particulate Filter Regeneration: Effect of Fuel-Borne Catalyst,' SAE paper 2002-01-2786
- Gerd Gaiser and Patrick Mucha J.(2004), 'Prediction of Pressure Drop in Diesel Particulate Filters Considering Ash Deposit and artial Regenerations,' SAE paper 2004-01-0158
- Mansour Masoudi and Achim Heibel (2000), 'Predicting Pressure Drop of Wall Flow Diesel Particulate Filters - Theory and Experiment,' SAE paper 2000-01-0184
- Athanasios G. Konstandopoulos, 'Flow Resistance Descriptors for Diesel Particulate Filters: Definitions, Measurements and Testing,' SAE paper 2003-01-0846, 2003
- Marco Ranalli and Juergen Klement (2004), 'Soot Distribution in DPF Systems. A Simple and Cost Effective Measurement Method for Series Development', SAE paper 2004-01-1432
- Gang Guo, Ning Xu, Paul M. Laing, Robert H. Hammerle and M. Matti Maricq (2003), 'Performance of a Catalyzed Diesel Particulate Filter System During Soot Accumulation and Regeneration,' SAE paper 2003-01-0047
- M. D. Rumminger, X. Zhou, K. Balakrishnan and B. L. Edgar (2001), 'Regeneration Behavior and Transient Thermal Response of Diesel Particulate Filters,' SAE paper 2001-01-1342
- Katsunori Hanamura, Takamasa Suzuki and Toshiyuki Tanaka, Yukio Miyairi (2003), 'Visualization of Combustion Phenomena in Regeneration of Diesel Particulate Filter,' SAE paper 2003-01-0836
- Taroh Uchiyama, Satoshi Enamito, and Kazuhiko Takesa, Shigeru Muramoto and Shiro Tanii (1994), 'Development of Particulate Trap System with Cross Flow Ceramic Filter and Reverse Flow Cleaning Regeneration 2,' SAE paper 940463
- J. Oesterle, G. Gaiser and P. Zacke J.(2004), 'Homogeneous Loading and Regeneration of Diesel Particulate Filters using Progressive Spin Elements,' SAE paper 2004-01-1424
- G. Gaiser, J. Oesterle, J. Braun and P. Zacke J. (2003), 'The Progressive Spin Inlet - Homogeneous Flow Distributions Under Stringent Conditions,' SAE paper 2003-01-0840
- Korea Standard A 0612 (1997), Measurement of Fluid Flow by Means of Orifice Plates, Nozzles and Venturi Tubes Inserted in Circular Cross-Section Conduits Running Full