Performance Improvement of Polymer Light Emitting Diodes by Insertion of a Silane Layer

  • Lee, Jun-Yeob (Department of Polymer Science and Engineering, Dankook University, Member, KIDS)
  • 발행 : 2007.09.30

초록

The influence of a silane layer on the performances of polymer light emitting diode(pLED)s has been studied. Glycidoxypropyltrimethoxysilane(GPS) with an epoxy functional group was used as a surface modifier for ITO substrates. The GPS layer was inserted between an ITO and a poly(3,4)-ethylenedioxythiophene/polystyrenesulfonate(PEDOT) by wet process and the performances of PLEDs were investigated. The introduction of GPS layer increased the brightness and efficiency of PLEDs by 30%. In addition, the lifetime of PLEDs was also improved considerably by using GPS as a surface modifier.

키워드

참고문헌

  1. J. H. Burroughes, D. D. C. Bradley, A. R. Brown, R. N. Marks, K. Mackey, R. H. Friend, P. K. Burns and A. B. Holmes, Nature(London) 347, 29(1990)
  2. G. E. Jabbour, Y. Kawabe, S. E. Shaheen, J. F. Wang, M. M. Morrell, B. Kippelen and N. Peyghambarian, Appl. Phys. Lett. 71, 1762(1997) https://doi.org/10.1063/1.119392
  3. S. E. Shaheen, G. E. Jabbour, M. M. Morrell, Y. Kawabe, B. Kippelen, and N. Peyghambarian, Appl. Phys. Lett. 84, 2324(1998)
  4. L. S. Hung, C. W. Tang and M. G. Mason, Appl. Phys. Lett. 70, 452(1997) https://doi.org/10.1063/1.118178
  5. C. Qiu, H. Chen, Z. Xie, M. Wong and H. S. Kwok, Appl. Phys. Lett. 80, 3485(2002) https://doi.org/10.1063/1.1476712
  6. F. Zhu, B. Low, K. Zhang and S. Chua, Appl. Phys. Lett. 79, 1205(2001) https://doi.org/10.1063/1.1396819
  7. E. P. Plueddemann, Silane Coupling Agents(Plenum, New York and London, 1982), p. 120
  8. L. Bozano, S. A. Carter, J. C. Scott, G. G. Malliaras and P. J. Brock, Appl. Phys. Lett. 74, 1132(1999) https://doi.org/10.1063/1.123959