Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Optimal Design of Tuned Mass Damper Considering the Friction between the Moving Mass and the Rail

레일의 운동마찰력을 고려한 TMD 최적 설계

  • Published : 2007.06.20
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, based on the results from the sinusoidal base excitation analyses of a single degree of freedom system with a tuned mass damper (TMD), it is verified that optimal friction force can improve the performance of a TMD like a linear viscous damper which has been usually used in general TMD. The magnitude of the optimal friction increases with increasing mass ratio of the TMD and decreases with increasing structural damping. Particularly, it is observed that the optimized friction force gives better control performance than the optimized viscous damping of the TMD. However, because the performance of the TMD considerably deteriorates when the friction force increases over the optimal value, it is required to keep the friction force from exceeding the optimal value.

Keywords

References

  1. Chu, S. Y., Soong, T. T. and Reinhorn, A. M., 2005, 'Active, Hybrid and Semi-active Structural Control - A Design and Implementation Handbook', John Wiley & Sons, West Sussex, England.chap.1
  2. Choi, S. J., Yoo, M. S., Ahn, S. G. and Park, C. H., 2003, 'Effective Vibration Control of Existing Footbridge Using Tuned Mass Damper', Proceedings of KSNVE Annual Autumn Conference, pp. 263-269
  3. Soong, T. T. and Dargush, G. F., 1997, 'Passive Energy Dissipation Systems in Structural Engineering', John Wiley&Sons, New York, chap.7
  4. Yalla, S. K., 2001, 'Liquid Dampers for Mitigation of Structural Response: Theoretical Development and Experimental validation', Ph.D. Thesis, University of Notre Dame
  5. Den Hartog, J. P., 1956, 'Mechanical Vibraions, 4thEdition'. McGraw-Hill, New York
  6. Warburton, G. B., 1982, 'Optimal Absorber Parameters for Various Combinations of Response and Excitation Parameters', Earthquake Engineering and Structural Dynamics, Vol. 10, pp. 381-401 https://doi.org/10.1002/eqe.4290100304
  7. Ioi, T. and Ikeda, K, 1978, 'On the Dynamic Vibration Damped Absorber of the Vibration System', Bulletin of Japanese Society of Mechanical Engineering, Vol. 21, pp. 64-71 https://doi.org/10.1299/jsme1958.21.64
  8. Tsai, K. C. and Lin, G. C., 1993, 'Optimum Tuned-mass Dampers for Minimizing Steady-state Response of Support-excited and Damped Systems', Earthquake Engineering and Structural Dynamics, Vol. 22, pp. 957-973 https://doi.org/10.1002/eqe.4290221104
  9. Sadek, F., Mohraz, B., Taylor, A. W. and Chung, R. M., 1997, 'A Method of Estimating the Parameters of Tuned Mass Dampers for Seismic Applications', Earthquake Engineering and Structural Dynamics, Vol. 26, pp. 617-635 https://doi.org/10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z
  10. Feng, M. Q. and Mita, A, 1995, 'Vibration Control of Tall Buildings Using Mega Subconfiguration', Journal of Engineering Mechanics ASCE, Vol. 121, pp. 1082-1088 https://doi.org/10.1061/(ASCE)0733-9399(1995)121:10(1082)