DOI QR코드

DOI QR Code

Effect of Inlet Temperature and CO2 Concentration in the Fresh Charge on Combustion in a Homogeneous Charge Compression Ignition Engine Fuelled with Dimethyl Ether

Dimethyl Ether 예혼합 압축 착화 엔진에서 흡기중 CO2 농도와 흡기온도 변화가 연소에 미치는 영향

  • 배충식 (한국과학기술원 기계공학과) ;
  • 장진영 (한국과학기술원 기계공학과) ;
  • 염기태 (한국과학기술원 기계공학과)
  • Published : 2007.06.01

Abstract

This study focused on the effects of the $CO_2$ gas concentration in fresh charge and induction air temperature on the combustion characteristics of homogeneous charge compression ignition with dimethyl ether (DME) fuel, which was injected at the intake port. Because of adding $CO_2$ in fresh charge, start of auto-ignition was retarded and bum duration became longer. Indicated combustion efficiency and exhaust gas emission were found to be worse due to the incomplete combustion. Partial burn was observed at the high concentration of $CO_2$ in fresh charge with low temperature of induction air. However, indicated thermal efficiency was improved due to increased expansion work by late ignition and prolonged bum duration. Start of auto-ignition timing was advanced with negligible change of burn duration, as induction air temperature increased. Burn duration was mainly affected by oxygen mole concentration in induction mixture. Bum duration was increased, as oxygen mole concentration was decreased.

Keywords

References

  1. Kook, S., Park C., Choi, W., Bae, C., 2004, 'Effects of Two-Stage Injection on Combustion and Exhaust Emission Characteristics in a HCCI Engine,' Trans. of the KSAE, Vo.12, No.5, pp32-39
  2. Epping, K., Aceves, S., Bechtold, R., Dec, J., 2002, 'The Potential of HCCI Combustion for High Efficiency and Low Emissions,' SAE paper No. 2002-01-1923
  3. Zhao, F., Asmus, T., Assanis, D., Dec, J., Eng, J., Najt, P., 2003, Homogeneous Charge Compression Ignition (HCCI) Engine : Key Research and Development Issues, Society of Automotive Engineers, Warrendale, Pa
  4. Golovitchev, V. I., Nordin, N. and Chomiak, J., 1998, 'Neat Dimethyl Ether: Is It Really Diesel Fuel of Promise?,' SAE paper No. 982537
  5. Pyo, Y., Lee, Y., Kim, G., Kim, M., 2003, 'Engine Performance and Exhaust Emissions Characteristics of DI Diesel Engine Operated with Neat Dimethyl Ether,' Trans. of the KSME(B), Vo.27, No.5, pp. 589-595 https://doi.org/10.3795/KSME-B.2003.27.5.589
  6. Dec, J. E., 2002, 'A Computational Study of the Effects of Low Fuel Loading and EGR on Heat Release Rates and Combustion Limits in HCCI Engines,' SAE paper No. 2002-01-1309
  7. Yeom, K., Woo, Y., Jang, J., Park, Y., Bae, C., 2003, 'Performance nd Emission Charateristics of Liquid-Phase LPG Injection Engine with Different EGR Rate,' Trans. of the KSAE, Vol.11, No.5, pp7-14
  8. Ladommatos, N., Abdelhallm, S. M., Zhao, H., and Hu, Z., 1996, 'The Dilution, Chemical, and Thermal Effects of Exhaust Gas Recirculation on Diesel Engine Emissions Part 1: Effect of Reducing Inlet Charge Oxygen,' SAE paper No. 961165
  9. Ladommatos, N., Abdelhallm, S. M., Zhao, H., and Hu, Z., 1996, 'The Dilution, Chemical, and Thermal Effects of Exhaust Gas Recirculation on Diesel Engine Emissions Part 2: Effect of Carbon Dioxide,' SAE paper No. 961167
  10. Sahashi, W., Azetsu, A. and Oikawa, C., 2005, 'Effects on $N_2$ and $CO_2$ mixing on ignition and combustion in a homogeneous charge compression ignition engine operated on dimethyl ether,' IJER vol. 6 PP. 423-431
  11. Milovanovic, N. and Chen, R., 2001, 'A Review of Experimental and Simulation Studies on Controlled Auto-Ignition Combustion,' SAE paper No. 2001-01-1890
  12. Yamda, H., Sakanashi, H., Choi N. and TezakiA., 2003, 'Simplified Oxidation Mechanism of DME Applicable for Compression Ignition,' SAE paper No. 2003-01-1819