대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제31권6호
  • /
  • Pages.694-700
  • /
  • 2007
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

벌크형 와이어직조 카고메 트러스 PCM의 압축거동 (I) - 균일 변형 상계해 -

Mechanical Behaviors under Compression in Wire-Woven Bulk Kagome Truss PCMs (I) - Upper Bound Solution with Uniform Deformation -

  • 발행 : 2007.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, a new cellular metal, WBK(Wire woven Bulk Kagome) has been introduced. WBK is fabricated by assembling metal wires in six directions into a Kagome-like truss structure and by brazing it at all the crossings. Wires as the raw material are easy to handle and to attain high strength with minimum defect. And the strength and energy absorption are superior to previous cellular metals. Therefore, WBK seems to be promising once the fabrication process for mass production is developed. In this paper, an upper bound solution for the mechanical properties of the bulk WBK under compression is presented. In order to simulate uniform behavior of WBK consisted of perfectly uniform cells, a unit cell of WBK with periodic boundary conditions is analyzed by the finite element method. In comparison with experimental test results, it is found that the solution provides a good approximation of the mechanical properties of bulk WBK cellular metals except for Young's modulus. And also, the brazing joint size does not have any significant effect on the properties with an exception of an idealized thin joint.

키워드

참고문헌

  1. Wadley, H.N.G., Fleck, N.A., and Evans, A.G., 2003, 'Fabrication and Structural Performance of Periodic Cellular Metal Sandwich Structures,' Composite Science and Technology, Vol. 63, pp. 2331-2343 https://doi.org/10.1016/S0266-3538(03)00266-5
  2. Zok, F.W., Waltner, S.A., Wei, Z., Rathbun, H.J., McMeeking, R.M., and Evans, A.G., 2004, 'A Protocol for Characterizing the Structural Performance of Metallic Sandwich Panels: Application to Pyramidal Truss Cores,' International J. of Solids and Strutures, Vol. 41, pp. 6249-6271 https://doi.org/10.1016/j.ijsolstr.2004.05.045
  3. Jung, C.G., Yoon, S.J., Yang, D.Y., Lee, S.M., Na, S.J., Lee, S.H., and Ahn, D.G., 2005, 'Fabrication and Static Bending Test in Ultra Light Inner Structured and Bonded (ISB) Panel Containing Repeated Inner Pyramidal Structure,' Journal of the Korean Society of Precision Engineering, Vol. 22, pp. 175-182
  4. Sypeck, D.J. and Wadley, H.N.G., 2001, 'Cellular Metal Truss Core Sandwich Structures, ' Proceedings of the 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001) edited by J. Banhart, M.F. Ashby, N.A. Fleck, pp. 381-386
  5. V.S. Deshpande, N.A. Fleck, M.F. Ashby, 2001, 'Effective Properties of the Octet-Truss Lattice Material,' J. of the Mechanics and Physics of Solids, Vol.49, pp.1747-1769 https://doi.org/10.1016/S0022-5096(01)00010-2
  6. Chiras, S., Mumm, D.R., Wicks, N., Evans, A.G., Hutchinson, J.W., Dharamasena, K. Wadley, H.N.G. and Fichter, S. 2002, 'The Structural Performance of Near-Optimized Truss Core Panels,' International Journal of Solids and Structures, Vol. 39, pp. 4093-4115 https://doi.org/10.1016/S0020-7683(02)00241-X
  7. Kang, K.J., Lim, J.H., Nah, S.J. and Koo, M.H., 2005, 'Compressive and Bending Behavior of Sandwich Panels with Octet Truss Core Fabricated from Wires,' J. of the Korean Society of Mechanical Engineers, Vol. A-29, pp. 470-476 https://doi.org/10.3795/KSME-A.2005.29.3.470
  8. Hyun, S., Karlsson, A. M., Torquato, S. and Evans, A. G., 2003, 'Simulated Properties of Kagome and Tetragonal Truss Core Panel,' Int. J. Solids and Structures, Vol. 40, pp. 6989-6998 https://doi.org/10.1016/S0020-7683(03)00350-0
  9. Wang, J., Evans, A.G., Dharmasena, Wadley, H.N.G., 2003, 'On the Performance of Truss Panels with Kagome Cores,' International Journal of Solids and Structures, Vol. 40, pp. 6981~6988 https://doi.org/10.1016/S0020-7683(03)00349-4
  10. Kang, K.J., Jeon, G.P., Nah, S.J., Ju, B.S., and Hong, N.H., 2004, 'A New Way to Manufacture Ultra Light Metal Structures,' J. of the Korean Society of Mechanical Engineers, Vol.A-28, pp. 296-303
  11. Kang, K.J. and Lee, Y.H., 2004, 'Three- Dimensional Cellular Light Structures Directly Woven by Continuous Wires and the Manufacturing Method of the Same,' Patent Pending PCT/KR2004/002864 /05 November
  12. Lee, Y.H., Choi, J.E., Kang, K.J., 2006, 'A new periodic cellular metal with Kagome trusses and its performance,' ASME International Mechanical Engineering Congress and Exposition, Chicago, USA, No. IMECE2006-15467, November
  13. George E. Linnert, 1965, 'Welding Metallurgy,' American welding society, Vol. 1, pp. 158-166
  14. Mills, N.J., 2006, 'The hight strain mechanical response of the wet Kelvin model for open-cell foams,' Int. J. Solids and Structures, Article in press
  15. Lee, B.K., Lee, Y.H., Kang, K.J., Jeon, I.S., 2007, 'Evaluation of Compressive Behavior of Wire Woven Bulk Kagome,' Submitted to Conferences of the Korean Society of Material and fracture division

피인용 문헌

  1. Effect of imperfections on the mechanical behavior of wire-woven bulk kagome truss PCMs under shear loading vol.23, pp.5, 2009, https://doi.org/10.1007/s12206-008-1202-2