Transactions of the Society of Information Storage Systems (정보저장시스템학회논문집)
- Volume 3 Issue 2
- /
- Pages.54-58
- /
- 2007
- /
- 1738-6845(pISSN)
- /
- 2288-2022(eISSN)
New Material for a Super Resolution Disc
-
Kwak, Keum-Cheol
(LG Electronics Institute of Technology(LG-Elite))
;
- Kim, Sun-Hee (LG Electronics Institute of Technology(LG-Elite)) ;
- Lee, Chang-Ho (LG Electronics Institute of Technology(LG-Elite)) ;
- Song, Ki-Chang (LG Electronics Institute of Technology(LG-Elite))
- Published : 2007.06.01
Abstract
Using metal/Si materials as a recording layer, we have achieved good results for a SR disc (super resolution disc). Mainly by controlling metal composition and the ratio of metal to Si of recording layer, signal qualities were greatly enhanced. At the mark length of 75nm, the best CNR (Carrier to Noise Ratio) was about 45dB. Write power was reduced down to about 6.5mW. LFN (Low Frequency Noise) could also be reduced down to 14dB. Single tone pattern jitters for every mark whose length is from 2T through 8T were achieved to be below 10%. The readout signal was stable sustaining CNR>40dB during about 15,000 times reading. The so-called "3T-problem" could be avoided.