Smart Structures and Systems

  • 제3권3호
  • /
  • Pages.299-320
  • /
  • 2007
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Issues in structural health monitoring employing smart sensors

  • Nagayama, T. (Department of Civil Engineering, University of Tokyo) ;
  • Sim, S.H. (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign) ;
  • Miyamori, Y. (Kitami Institute of Technology) ;
  • Spencer, B.F. Jr. (Department of Civil Engineering, University of Illinois at Urbana-Champaign)
  • 투고 : 2006.08.01
  • 심사 : 2006.10.20
  • 발행 : 2007.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Smart sensors densely distributed over structures can provide rich information for structural monitoring using their onboard wireless communication and computational capabilities. However, issues such as time synchronization error, data loss, and dealing with large amounts of harvested data have limited the implementation of full-fledged systems. Limited network resources (e.g. battery power, storage space, bandwidth, etc.) make these issues quite challenging. This paper first investigates the effects of time synchronization error and data loss, aiming to clarify requirements on synchronization accuracy and communication reliability in SHM applications. Coordinated computing is then examined as a way to manage large amounts of data.

키워드

참고문헌

  1. Allemang, R. J. (2003), "The modal assurance criterion-twenty years of use and abuse", Sound Vib., 37(8), 14-23.
  2. Arici, Y. and Mosalam, K. M. (2003), "Modal analysis of a densely instrumented building using strong motion data", Proceedings of the International Conference on Applications of Statistics and Probability in Civil Engineering, San Francisco, CA, June 6-9, 419-426.
  3. Bendat, J. S. and Piersol, A. G. (2000), Random Data: Analysis and Measurement Procedures, John Wiley and Sons, Inc. New York, NY.
  4. Bernal, D. (2000), "Extracting flexibility matrices from state-space realization", COST F3 Conf., Madrid, Spain, 127-135.
  5. Bernal, D. (2002), "Load vectors for damage localization", J. Eng. Mech., 128(1), 7-14. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:1(7)
  6. Casciati, F., Faraveli, L. and Borghetti, F. (2003), "Wireless links between sensor-device control stations in long span bridges", Smart Structures and Materials 2003: Smart Systems and Nondestructive Evaluation for Civil Infrastructures, Proceedings of the SPIE, Vol. 5057, San Diego, CA, pp. 1-7
  7. Celebi, M. (2002), "Seismic instrumentation of buildings (with emphasis on federal buildings)", Special GSA/USGS Project, an administrative report, United States Geological Survey, Menlo Park, CA.
  8. Crossbow Technology, Inc. http://www.xbow.com.
  9. Doebling, S. W., Farrar, C. R., Prime, M. B. and Shevitz, D. W. (1996), "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review", LA-13070-MS.
  10. Doebling, S. W., Farrar, C. R., and Prime, M. B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib. Digest, 30(2), 91-105. https://doi.org/10.1177/058310249803000201
  11. Doebling, S. W. and Farrar, C. R. (1999), "The state of the art in structural identification of constructed facilities", A report by American Society of Civil Engineers Committee on Structural Identification of Constructed Facilities.
  12. Elson, J., Girod, L. and Estrin, D. (2002), "Fine-grained network time synchronization using reference broadcasts", Proc. of the Fifth Symposium on Operating Systems Design and Implementation (OSDI 2002).
  13. Farrar, C. R. (2001), "Historical overview of structural health monitoring", Lecture Notes on Structural Health Monitoring using Statistical Pattern Recognition, Los Alamos Dynamics, Los Alamos, NM.
  14. Gao., Y. (2005), "Structural health monitoring strategies for smart sensor networks", PhD Dissertation, University of Illinois at Urbana-Champaign.
  15. Gros, X. E. (1997), NDT data fusion, Arnold, London, UK.
  16. Hollar, S. (2000), COTS Dust., Master's Thesis, University of California, Berkeley, CA.
  17. James, G. H., Carne, T. G. and Lauffer, J. P. (1993), "The natural excitation technique for modal parameter extraction from operating wind turbine", Report No. SAND92-1666, UC-261, Sandia National Laboratories, Sandia, NM.
  18. James, G. H., Carne, T. G., Lauffer, J. P. and Nord, A. R. (1992), "Modal testing using natural excitation", Proceedings of 10th Int. Modal Analysis Conference, San Diego, CA.
  19. Kottapalli, V. A., Kiremidjian, A. S., Lynch, J. P., Carryer, E., Kenny, T. W., Law, K. H. and Lei, Y. (2003), "Twotiered wireless sensor network architecture for structural health monitoring", Smart Struct. Mater., San Diego, CA, March 3-6, Proceedings of the SPIE, 5057, 8-19.
  20. Kurata, N., Spencer, B. F. Jr. and Ruiz-Sandoval, M. (2004), "Building risk monitoring using wireless sensor network", Proceedings of the 13th World Conference on Earthquake Engineering, August 2-6, Vancouver, BC, Cananda.
  21. Lei, Y., Kiremidjian, S., Nair, K. K., Lynch, J. P. and Law, K. H. (2004), "Algorithms for time synchronization of wireless structural monitoring sensors", Earthq. Eng. Struct. Dyn., 34, 555-573.
  22. Lynch, J. P., Wang, Y., Law, K. H., Yi, J.-H., Lee, C. G. and Yun, C. B. (2005), "Validation of a large-scale wireless structural monitoring system on the Geumdang bridge", Proceedings of the Int. Conference on Safety and Structural Reliability, Rome, Italy.
  23. Lynch, J. P. and Loh, K. J. (2006), "A summary review of wireless sensors and sensor networks for structural health monitoring", Shock Vib. Digest, 38(2), 91-128. https://doi.org/10.1177/0583102406061499
  24. Mechitov, K., Kim, W., Agha, G., and Nagayama, T. (2004), "High-frequency distributed sensing for structure monitoring", Proceedings of 1st Int. Workshop on Networked Sensing Systems, 101-105
  25. Nagayama, T., Ruiz-Sandoval, M., Spencer Jr., B. F., Mechitov, K. A. and Agha, G. A. (2004), "Wireless strain sensor development for civil infrastructure", Proceedings of 1st Int. Workshop on Networked Sensing Systems, Tokyo, Japan, 97-100.
  26. Nagayama, T., Abe, M., Fujino, Y. and Ikeda, K. (2005), "Structural identification of a nonproportionally damped system and its application to a full-scale suspension bridge", J. Struct. Eng., 131(10), 1536-1545. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:10(1536)
  27. Nagayama, T., Spencer, Jr., B. F., Agha, G. A. and Mechitov, K. A. (2006), "Model-based data aggregation for structural monitoring employing smart sensors", Proceedings of the Third International Conference on Networked Sensing Systems (INSS 2006), May 31- Jun 2, pp. 203-210.
  28. Nitta, Y., Nagayama, T., Spencer Jr., B. F. and Nishitani, A. (2005), "Rapid damage assessment for the structures utilizing smart sensor MICA2 MOTE", Proceedings of 5th Int. Workshop on Structural Health Monitoring, Stanford, CA., 283-290.
  29. Salawu, O. S. and Williams, C. (1995), "Review of full-scale dynamic testing of bridge structures", Eng. Struct., 17(2), 113-121. https://doi.org/10.1016/0141-0296(95)92642-L
  30. Sohn, H., Farrar, C. R., Hemez, F. M., Shunk, D. D., Stinemates, D. W. and Nadler, B. R. (2001), "A review of structural health monitoring literature: 1996-2001", Los Alamos National Laboratory Report, LA-13976-MS.
  31. Spencer Jr., B. F., Ruiz-Sandval, M. E. and Kurata, N. (2004), "Smart sensing technology: opportunities and challenges", Struct. Control Health Monit., 11, 349-368. https://doi.org/10.1002/stc.48
  32. Ruiz-Sandoval, M. (2004), "Smart sensors for civil infrastructure systems", Ph.D. Dissertation, University of Notre Dame, IN.
  33. Ruiz-Sandoval, M., Nagayama, T. and Spencer, B. F. (2006), "Sensor development using Berkeley Mote platform", J. Earthq. Eng., 10(2), 289-309.
  34. Wang, Y., Lynch, J. P. and Law, K. H. (2005), "Wireless structural sensors using reliable communication protocols for data acquisition and interrogation", Proceedings of the 23rd International Modal Analysis Conference (IMAC XXIII), Orlando, FL, January 31-February 3.
  35. Wong, K. Y. (2004), "Instrumentation and health monitoring of cable-supported bridges", Struct. Control Health Monit., 11(2), 91-124. https://doi.org/10.1002/stc.33

피인용 문헌

  1. Smart One-Channel Sensor Node for Ambient Vibration Test with Applications to Structural Health Monitoring of Large Civil Infrastructures vol.11, pp.11, 2015, https://doi.org/10.1155/2015/691565
  2. Structural damage detection robust against time synchronization errors vol.19, pp.6, 2010, https://doi.org/10.1088/0964-1726/19/6/065001
  3. Long term health monitoring of post-tensioning box girder bridges vol.4, pp.6, 2008, https://doi.org/10.12989/sss.2008.4.6.711
  4. Development of Wireless Smart Sensing Framework for Structural Health Monitoring of High-speed Railway Bridges vol.17, pp.5, 2016, https://doi.org/10.5762/KAIS.2016.17.5.1
  5. Compressive sampling–based data loss recovery for wireless sensor networks used in civil structural health monitoring vol.12, pp.1, 2013, https://doi.org/10.1177/1475921712462936
  6. A drive-by inspection system via vehicle moving force identification vol.13, pp.5, 2014, https://doi.org/10.12989/sss.2014.13.5.821
  7. Wireless Impedance Sensor Node and Interface Washer for Damage Monitoring in Structural Connections vol.15, pp.6, 2012, https://doi.org/10.1260/1369-4332.15.6.871
  8. On-Board Computing for Structural Health Monitoring with Smart Wireless Sensors by Modal Identification Using Hilbert-Huang Transform vol.2013, 2013, https://doi.org/10.1155/2013/509129
  9. An improved frequency-domain regression method for structural damage detection in wireless sensor network vol.8, pp.10, 2016, https://doi.org/10.1177/1687814016673805
  10. Wireless health monitoring of stay cable using piezoelectric strain response and smart skin technique vol.12, pp.3_4, 2013, https://doi.org/10.12989/sss.2013.12.3_4.381
  11. A Method of Data Recovery Based on Compressive Sensing in Wireless Structural Health Monitoring vol.2014, 2014, https://doi.org/10.1155/2014/546478
  12. Locating Damage Using Integrated Global-Local Approach with Wireless Sensing System and Single-Chip Impedance Measurement Device vol.2014, 2014, https://doi.org/10.1155/2014/729027
  13. Low-Latency Data Acquisition Hardware for Real-Time Wireless Sensor Applications vol.15, pp.3, 2015, https://doi.org/10.1109/JSEN.2014.2366932
  14. Smart wireless sensing and assessment for civil infrastructure vol.10, pp.4, 2014, https://doi.org/10.1080/15732479.2013.769011
  15. Development of a cost-effective and flexible vibration DAQ system for long-term continuous structural health monitoring vol.64-65, 2015, https://doi.org/10.1016/j.ymssp.2015.04.003
  16. TinyOS-based real-time wireless data acquisition framework for structural health monitoring and control vol.20, pp.6, 2013, https://doi.org/10.1002/stc.1514
  17. Autonomous decentralized structural health monitoring using smart sensors 2009, https://doi.org/10.1002/stc.352
  18. A review of output-only structural mode identification literature employing blind source separation methods vol.94, 2017, https://doi.org/10.1016/j.ymssp.2017.03.001
  19. Consensus-based decentralized real-time identification of large-scale systems vol.60, 2015, https://doi.org/10.1016/j.automatica.2015.07.018
  20. SHM-Based Probabilistic Fatigue Life Prediction for Bridges Based on FE Model Updating vol.16, pp.12, 2016, https://doi.org/10.3390/s16030317
  21. A Quantitative Basis for Building Instrumentation Specifications vol.27, pp.1, 2011, https://doi.org/10.1193/1.3532840
  22. Structural Identification for Mobile Sensing with Missing Observations vol.142, pp.5, 2016, https://doi.org/10.1061/(ASCE)EM.1943-7889.0001046
  23. Probabilistic Fatigue Life Updating for Railway Bridges Based on Local Inspection and Repair vol.17, pp.4, 2017, https://doi.org/10.3390/s17040936
  24. A Study on Data Loss Compensation of WiFi-Based Wireless Sensor Networks for Structural Health Monitoring vol.16, pp.10, 2016, https://doi.org/10.1109/JSEN.2015.2512846
  25. Recent Developments on Wireless Sensor Networks Technology for Bridge Health Monitoring vol.2013, 2013, https://doi.org/10.1155/2013/947867
  26. Envelope and Wavelet Transform for Sound Localisation at Low Sampling Rates in Wireless Sensor Networks vol.2012, 2012, https://doi.org/10.1155/2012/680383
  27. An Approach of Reliable Data Transmission With Random Redundancy for Wireless Sensors in Structural Health Monitoring vol.15, pp.2, 2015, https://doi.org/10.1109/JSEN.2014.2352612
  28. Enabling framework for structural health monitoring using smart sensors vol.18, pp.5, 2011, https://doi.org/10.1002/stc.386
  29. Efficient time synchronization for structural health monitoring using wireless smart sensor networks vol.23, pp.3, 2016, https://doi.org/10.1002/stc.1782
  30. Wireless structural health monitoring of stay cables under two consecutive typhoons vol.1, pp.1, 2014, https://doi.org/10.12989/smm.2014.1.1.047
  31. Application of Structural Health Monitoring System for Reliable Seismic Performance Evaluation of Infrastructures vol.15, pp.6, 2012, https://doi.org/10.1260/1369-4332.15.6.955
  32. Multiscale Acceleration-Dynamic Strain-Impedance Sensor System for Structural Health Monitoring vol.8, pp.10, 2012, https://doi.org/10.1155/2012/709208
  33. Wireless monitoring of typhoon-induced variation of dynamic characteristics of a cable-stayed bridge vol.20, pp.2, 2015, https://doi.org/10.12989/was.2015.20.2.293
  34. Time synchronization for acceleration measurement data of Jiangyin Bridge subjected to a ship collision vol.25, pp.1, 2018, https://doi.org/10.1002/stc.2039
  35. Effects of Wireless Sensor Network Uncertainties on Output-Only Modal Analysis Employing Merged Data of Multiple Tests vol.17, pp.3, 2014, https://doi.org/10.1260/1369-4332.17.3.319
  36. Embedding Compressive Sensing-Based Data Loss Recovery Algorithm Into Wireless Smart Sensors for Structural Health Monitoring vol.15, pp.2, 2015, https://doi.org/10.1109/JSEN.2014.2353032
  37. Development of an intelligent disaster information-integrated platform for radiation monitoring vol.76, pp.3, 2015, https://doi.org/10.1007/s11069-014-1565-x
  38. Characterization of Wireless Smart Sensor Performance vol.136, pp.12, 2010, https://doi.org/10.1061/(ASCE)EM.1943-7889.0000187
  39. Recent advances in wireless smart sensors for multi-scale monitoring and control of civil infrastructure vol.6, pp.1, 2016, https://doi.org/10.1007/s13349-015-0111-1
  40. Synchronized sensing for wireless monitoring of large structures vol.18, pp.5, 2016, https://doi.org/10.12989/sss.2016.18.5.885
  41. A Recent Research Summary on Smart Sensors for Structural Health Monitoring vol.19, pp.3, 2015, https://doi.org/10.11112/jksmi.2015.19.3.010
  42. System identification of a historic swing truss bridge using a wireless sensor network employing orientation correction vol.22, pp.2, 2015, https://doi.org/10.1002/stc.1672
  43. Repetitive model refinement for structural health monitoring using efficient Akaike information criterion vol.15, pp.5, 2015, https://doi.org/10.12989/sss.2015.15.5.1329
  44. Application of residuals from regression of experimental mode shapes to locate multiple crack damage in a simply supported reinforced concrete beam vol.45, pp.6, 2012, https://doi.org/10.1016/j.measurement.2012.03.006
  45. Vibration-Based Monitoring of Stay-Cable Force Using Wireless Piezoelectric-Based Strain Sensor Nodes vol.32, pp.6, 2012, https://doi.org/10.7779/JKSNT.2012.32.6.669
  46. The effect of non-synchronous sensing on structural identification and its correction vol.18, pp.3, 2016, https://doi.org/10.12989/sss.2016.18.3.541
  47. Structural identification of cable-stayed bridge under back-to-back typhoons by wireless vibration monitoring vol.88, 2016, https://doi.org/10.1016/j.measurement.2016.03.032
  48. Development and Evaluation of a WSN for Real-time Structural Health Monitoring and Testing vol.87, 2014, https://doi.org/10.1016/j.proeng.2014.11.622
  49. Multiagent-Based Collaborative Framework for a Self-Managing Structural Health Monitoring System vol.26, pp.1, 2012, https://doi.org/10.1061/(ASCE)CP.1943-5487.0000107
  50. A Data Loss Recovery Technique using Compressive Sensing for Structural Health Monitoring Applications pp.1976-3808, 2018, https://doi.org/10.1007/s12205-017-2070-z
  51. Development of a Wireless Unified-Maintenance System for the Structural Health Monitoring of Civil Structures vol.18, pp.5, 2018, https://doi.org/10.3390/s18051485
  52. Smart Radar Sensor Network for Bridge Displacement Monitoring vol.24, pp.1, 2019, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001322
  53. Middleware services for structural health monitoring using smart sensors vol.5, pp.2, 2007, https://doi.org/10.12989/sss.2009.5.2.119
  54. The needs for advanced sensor technologies in risk assessment of civil infrastructures vol.5, pp.2, 2007, https://doi.org/10.12989/sss.2009.5.2.173
  55. Flexible smart sensor framework for autonomous structural health monitoring vol.6, pp.5, 2007, https://doi.org/10.12989/sss.2010.6.5_6.423
  56. Reliable multi-hop communication for structural health monitoring vol.6, pp.5, 2010, https://doi.org/10.12989/sss.2010.6.5_6.481
  57. Autonomous smart sensor nodes for global and local damage detection of prestressed concrete bridges based on accelerations and impedance measurements vol.6, pp.5, 2007, https://doi.org/10.12989/sss.2010.6.5_6.711
  58. Output-only modal identification approach for time-unsynchronized signals from decentralized wireless sensor network for linear structural systems vol.7, pp.1, 2011, https://doi.org/10.12989/sss.2011.7.1.059
  59. Hybrid acceleration-impedance sensor nodes on Imote2-platform for damage monitoring in steel girder connections vol.7, pp.5, 2007, https://doi.org/10.12989/sss.2011.7.5.393
  60. Emergent damage pattern recognition using immune network theory vol.8, pp.1, 2011, https://doi.org/10.12989/sss.2011.8.1.069
  61. WiSeMote: a novel high fidelity wireless sensor network for structural health monitoring vol.10, pp.3, 2007, https://doi.org/10.12989/sss.2012.10.3.271
  62. Smart PZT-interface for wireless impedance-based prestress-loss monitoring in tendon-anchorage connection vol.9, pp.6, 2012, https://doi.org/10.12989/sss.2012.9.6.489
  63. A simple and efficient data loss recovery technique for SHM applications vol.20, pp.1, 2017, https://doi.org/10.12989/sss.2017.20.1.035
  64. Design and realization of multi-channel wireless data acquisition system for laboratory-scale experiments on structural health monitoring vol.6, pp.1, 2018, https://doi.org/10.21595/jme.2018.19699
  65. Bayesian ballast damage detection utilizing a modified evolutionary algorithm vol.21, pp.4, 2018, https://doi.org/10.12989/sss.2018.21.4.435
  66. Time Synchronization for Wireless Sensors Using Low-Cost GPS Module and Arduino vol.4, pp.None, 2007, https://doi.org/10.3389/fbuil.2018.00082
  67. Cable Force Identification Based on Bending Waves in Substructures vol.2020, pp.None, 2007, https://doi.org/10.1155/2020/8878806
  68. A power optimised and reprogrammable system for smart wireless vibration monitoring vol.27, pp.2, 2007, https://doi.org/10.1002/stc.2468
  69. Towards rapid and robust measurements of highway structures deformation using a wireless sensing system derived from wired sensors vol.10, pp.2, 2007, https://doi.org/10.1007/s13349-020-00385-5
  70. Structural modal identification and health monitoring of building structures using self-sensing cementitious composites vol.29, pp.5, 2007, https://doi.org/10.1088/1361-665x/ab79b9
  71. Development of Synchronized High-Sensitivity Wireless Accelerometer for Structural Health Monitoring vol.20, pp.15, 2007, https://doi.org/10.3390/s20154169
  72. Design and Validation of Android Smartphone Based Wireless Structural Vibration Monitoring System vol.20, pp.17, 2007, https://doi.org/10.3390/s20174799
  73. An evaluation study on the cumulative impact damages of reinforced concrete piers based on modal frequencies vol.119, pp.None, 2007, https://doi.org/10.1016/j.engfailanal.2020.104983
  74. Design and Validation of a Scalable, Reconfigurable and Low-Cost Structural Health Monitoring System vol.21, pp.2, 2021, https://doi.org/10.3390/s21020648
  75. Output-only modal analysis for non-synchronous data using stochastic sub-space identification vol.230, pp.None, 2007, https://doi.org/10.1016/j.engstruct.2020.111702
  76. Compressed sensing-based electromechanical admittance data loss recovery for concrete structural health monitoring vol.20, pp.3, 2007, https://doi.org/10.1177/1475921720950640
  77. A hybrid method coupling empirical mode decomposition and a long short-term memory network to predict missing measured signal data of SHM systems vol.20, pp.4, 2007, https://doi.org/10.1177/1475921720932813
  78. Performance of cement composite embeddable sensors for strain-based health monitoring of in-service structures vol.28, pp.2, 2021, https://doi.org/10.12989/sss.2021.28.2.181
  79. A Data Loss Recovery Technique Using EMD-BiGRU Algorithm for Structural Health Monitoring vol.11, pp.21, 2007, https://doi.org/10.3390/app112110072
  80. Fully Automated and Robust Cable Tension Estimation of Wireless Sensor Networks System vol.21, pp.21, 2021, https://doi.org/10.3390/s21217229
  81. HTR-CTO algorithm for wireless data recovery vol.587, pp.None, 2007, https://doi.org/10.1016/j.ins.2021.12.029