Smart Structures and Systems

  • 제3권1호
  • /
  • Pages.51-68
  • /
  • 2007
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Modeling shear capacity of RC slender beams without stirrups using genetic algorithms

  • Nehdi, M. (Department of Civil and Environmental Engineering, The University of Western Ontario) ;
  • Greenough, T. (Department of Civil and Environmental Engineering, The University of Western Ontario)
  • 투고 : 2005.11.16
  • 심사 : 2006.04.21
  • 발행 : 2007.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

High-strength concrete (HSC) is becoming increasingly attractive for various construction projects since it offers a multitude of benefits over normal-strength concrete (NSC). Unfortunately, current design provisions for shear capacity of RC slender beams are generally based on data developed for NSC members having a compressive strength of up to 50 MPa, with limited recommendations on the use of HSC. The failure of HSC beams is noticeably different than that of NSC beams since the transition zone between the cement paste and aggregates is much denser in HSC. Thus, unlike NSC beams in which micro-cracks propagate around aggregates, providing significant aggregate interlock, micro-cracks in HSC are trans-granular, resulting in relatively smoother fracture surfaces, thereby inhibiting aggregate interlock as a shear transfer mechanism and reducing the influence of compressive strength on the ultimate shear strength of HSC beams. In this study, a new approach based on genetic algorithms (GAs) was used to predict the shear capacity of both NSC and HSC slender beams without shear reinforcement. Shear capacity predictions of the GA model were compared to calculations of four other commonly used methods: the ACI method, CSA method, Eurocode-2, and Zsutty's equation. A parametric study was conducted to evaluate the ability of the GA model to capture the effect of basic shear design parameters on the behaviour of reinforced concrete (RC) beams under shear loading. The parameters investigated include compressivestrength, amount of longitudinal reinforcement, and beam's depth. It was found that the GA model provided more accurate evaluation of shear capacity compared to that of the other common methods and better captured the influence of the significant shear design parameters. Therefore, the GA model offers an attractive user-friendly alternative to conventional shear design methods.

키워드

참고문헌

  1. American Concrete Institute (2002), ACI Building Code Requirements for Reinforced Concrete, ACI 318-02.
  2. Ashour, A. F., Alvarez, L. F. and Toropov, V. V. (2003), "Emprical modeling of shear strength of RC deep beams by genetic programming", Comput. Struct., 81, 331-38. https://doi.org/10.1016/S0045-7949(02)00437-6
  3. Bhatt, P. and Kader, M. A. (1998), "Prediction of shear strength of reinforced concrete beams by nonlinear finite element analysis", Comput. Struct., 68, 139-55. https://doi.org/10.1016/S0045-7949(98)00034-0
  4. Cladera, A. and Mari, A. R. (2004), "Shear design procedure for reinforced normal and high-strength concrete beams using artificial neural networks, Part I: beams without stirrups", Eng. Struct., 26, 917-26. https://doi.org/10.1016/j.engstruct.2004.02.010
  5. Coello, C., Hernandez, F. S., Farrera, F. A. (1997), "Optimal design of reinforced concrete beams using genetic algorithms", Expert Systems with Applications, 12(1), 101-08. https://doi.org/10.1016/S0957-4174(96)00084-X
  6. Collins, M. P. and Kuchma, D. (1999), "How safe are our large, lightly reinforced concrete beams, slabs and footings", ACI Struct. J., 96(4), 482-90.
  7. CSA Committee A23.3, Design of Concrete Structures: Structures (Design)-A National Standard of Canada, CanadianStandards Association, Rexdale, Ontario, Canada, 1994.
  8. El Chabib, H., Nehdi, M. and Said, A. (2005), "Predicting shear capacity of NSC and HSC slender beams using artificial intelligence", Comput. Concrete 16(1), 12.
  9. European Committee for Standardization. Eurocode 2: Design of Concrete Structures, Part 1: General rules and rules for buildings. Final Draft, July 2002, p. 226.
  10. Gen, M. and Cheng, R. (1997), Genetic Algorithms and Engineering Design, John Wiley, 411 p.
  11. Goldberg, D. (1989), Genetic Algorithms in Search, Optimization and Machine Learning, Addison-Wesley Longman Publishing Co., Inc, 412 p.
  12. Kani, G. N. J. (1967), "How safe are our large reinforced concrete beams?", ACI J. Proceedings, 64(3), 128-41.
  13. Kim, J. K. and Park, Y. D. (1996), "Prediction of shear strength of reinforced concrete beams without web reinforcement", ACI Mater. J., 93(3), 213-22.
  14. Koumousis, V. K., Arsenis, S. J. (1998), "Genetic algorithms in optimal detailed design of reinforced concrete members", Comput. Aided Civ. Infrastruct. Eng., 13, 43-52. https://doi.org/10.1111/0885-9507.00084
  15. Lim, C. H. and Yoon, Y. S. (2004), "Genetic algorithm in mix proportioning of high-performance concrete", Cement Concrete Res., 34(3), 409-20. https://doi.org/10.1016/j.cemconres.2003.08.018
  16. Mansour, M. Y., Dicleli, M., Lee, J. Y. and Zhang, J. (2004), "Predicting the shear strength of reinforced concretebeams using artificial neural networks", Eng. Struct., 26, 781-99. https://doi.org/10.1016/j.engstruct.2004.01.011
  17. Michalewicz, Z. (1992), Genetic Algorithms + Data Structures = Evolution Programs, Springer-Verlag, 387 p.
  18. Oreta, A. (2004), "Simulating size effect on shear strength of RC beams without stirrups using neural networks", Eng. Struct., 26, 681-91. https://doi.org/10.1016/j.engstruct.2004.01.009
  19. Rebeiz, K. (1999), "Shear strength prediction for concrete members", J. Struct. Eng., ASCE 125(3), 301-08. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(301)
  20. Rebeiz, K. (2001), "Effect of variables on shear strength of concrete beams", J. Mater. Civ. Eng., ASCE, 13(6), 467-70. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:6(467)
  21. Salandra, M. and Ahmad, S. (1989), "Shear capacity of reinforced lightweight high-strength concrete beams", ACI Struct. J., 86(6), 697-704.
  22. Taylor, H. P. J. (1970), "Investigation of the forces carried across cracks in reinforced concrete beams in shear by interlock of aggregate", Technical Report No. 42.447, Cement and Concrete Association, London, 22 p.
  23. Wang, Q. J. (1997), "Using genetic algorithms to optimise model parameters", Environmental Modelling & Software, 12(1), 27-34. https://doi.org/10.1016/S1364-8152(96)00030-8
  24. Zararis, P. and Papadakis, G. (2001), "Diagonal shear failure and size effect in RC beams without web reinforcement", J. Struct. Eng., ASCE, 127(7), 733-41. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(733)

피인용 문헌

  1. A practical hybrid NNGA system for predicting the compressive strength of concrete containing natural pozzolan using an evolutionary structure vol.149, 2017, https://doi.org/10.1016/j.conbuildmat.2017.05.165
  2. Static vulnerability of existing R.C. buildings in Italy: a case study vol.39, pp.4, 2007, https://doi.org/10.12989/sem.2011.39.4.599