Steel and Composite Structures

  • 제7권6호
  • /
  • Pages.469-486
  • /
  • 2007
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Ultimate load behaviour of tapered steel plate girders

  • Shanmugam, N.E. (Department of Civil and Structural Engineering, Universiti Kebangsaan Malaysia) ;
  • Min, Hu (Department of Civil Engineering, National University of Singapore)
  • 투고 : 2007.05.16
  • 심사 : 2007.11.30
  • 발행 : 2007.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The paper is concerned with the behavior of tapered steel plate girders, primarily subjected to shear loading; experimental as well as finite element results obtained from the studies are presented in this paper. In the experimental study, 11 large-scale girders, one of uniform section and 10 tapered, were tested to failure and all girders were analysed by finite element method. The results are compared and the accuracy of the finite element modeling established. A parametric study was carried out with thickness of web, loading direction and taper angle as parameters. An analytical model, based on Cardiff model for girders of uniform cross-section, is also proposed in the paper.

키워드

참고문헌

  1. ABAQUS Theory Manual Version 5.4, Hibbit, Karlsson & Sorensen, Inc., USA., 1994.
  2. ABAQUS User's Manual Version 5.4, Hibbit, Karlsson & Sorensen, Inc., USA., 1994.
  3. ABAQUS/POST Manual Version 5.4, Hibbit, Karlsson & Sorensen, Inc., USA., 1994.
  4. Baskar, K., Shanmugam, N. E. and Thevendran, V. (2002),"Finite element analysis of steel-concrete composite plate girders", J. Struct. Eng., ASCE, USA, 128, (9), 1158 -1168. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1158)
  5. Baskar, K. and Shanmugam, N. E. (2003),"Steel-concrete composite plate girders subject to combined shear and bending", J. Constr. Steel Res., UK. 59(4), 531-557. https://doi.org/10.1016/S0143-974X(02)00042-1
  6. Calladine, C. R. (1973),"Plastic theory for collapse of plate girders under combined shearing force and bending moment", Structural Engineer, 51(4), 147-154.
  7. Davis, G and Mandal, S. N. (1979),"The collapse behaviour of tapered plate girders loaded within the tip". Proceedings of the Institution of Civil Engineers, Part 2, 67, pp.65-80. https://doi.org/10.1680/iicep.1979.2317
  8. Evans, H. R., Porter, D. M. and Rockey, K. C. (1978),"The collapse behavior of plate girders subjected to shear and bending", Int. Ass. Bridge Struct. Eng, Periodical, Proc. P-18/78.
  9. Graciano, C. A. and Edlund, B. (2002),"Nonlinear FE analysis of longitudinally stiffened girder webs under patch loading", J. Constr Steel Res., 58, 1231-1245. https://doi.org/10.1016/S0143-974X(01)00069-4
  10. Graciano, C.cA. (2003),"ultimate resistance of longitudinally stiffened webs subjected to patch loading", Thin- Walled Struct., 41, 529-541. https://doi.org/10.1016/S0263-8231(03)00004-1
  11. Jung, S. K. and White, D. W. (2006),"Shear strength of horizontally curved steel I-girders finite element analysis studies", J. Constr. Steel Res., 62,329-342. https://doi.org/10.1016/j.jcsr.2005.08.003
  12. Kim, J. T., Park, J. H. and Lee, B. J. (2007),"Vibration-based damage monitoring in model plate- girder bridges under uncertain temperature conditions", Eng. Struct., 29, 1354-1365. https://doi.org/10.1016/j.engstruct.2006.07.024
  13. Lian, V. T. and Shanmugam, N. E. (2003),"Openings in horizontally curved plate girders", Thin-Walled Struct., UK, 41(2-3), 245-269. https://doi.org/10.1016/S0263-8231(02)00090-3
  14. Lian, V. T. and shanmugam, N. E. (2004),"Design of horizontally curved plate girder webs containing circular openings", Thin Walled Struct., UK, 42(5), 719-739. https://doi.org/10.1016/j.tws.2003.12.007
  15. Owen, D. R. J., Rockey, K. C. and Skaloud, M. (1970),"Ultimate load behavior of longitudinally reinforced web plate subjected to pure bending", IABSE Publications, 113-148.
  16. Park, Y. H., Park, C. and Park Y. G. (2005),"The behaviour of an in-service plate girder bridge strengthened with external prestressing tendons", Eng. Struct., 27, 379-386. https://doi.org/10.1016/j.engstruct.2004.10.014
  17. Porter, D. M., Rockey, K, C, and Evans, H. R. (1975),"The collpase behaviour of plate girders loaded in shear", Structural Engineer, 53, 313-325.
  18. Roberts, T. M. and Rockey, K. C. (1979),"A mechanism solution for predicting the collapse loads of slender plate girders when subjected to in-plane patch loading", Proceedings of the Institution of Civil Engineers, Part 2, 67, 155-175. https://doi.org/10.1680/iicep.1979.2322
  19. Roberts, T. M. and Markovic, N. (1983),"Stocky plate girders subjected to edge loading", Proceedings of the Institution of Civil Engineers, Part 2, 75, 539-550. https://doi.org/10.1680/iicep.1983.1444
  20. Roberts, T. M. (1981),"Slender plate girders subjected to edge loading", Proc. Inst. Civ. Engr., Part 2, 71, 805-819. https://doi.org/10.1680/iicep.1981.1820
  21. Roberts, T. M., Newark, A. C. (1996),"Shear strength of tapered aluminium plate girders", Bicentenary conference on Thin-Walled Structures, Galsgow.
  22. Roberts, T. M and Newark, A. C. B. (1997),"Shear strength of tapered aluminium plate girders", Thin-Walled Struct., 29(1-4), 47-58. https://doi.org/10.1016/S0263-8231(97)00014-1
  23. Roberts, T. M. and Shahabian, F. (2001),"Ultimate resistance of slender web panels to combined bending shear and patch loading", J. Constr. Steel Res, 57, 779-790. https://doi.org/10.1016/S0143-974X(01)00009-8
  24. Rockey, K. C. (1968),"Factors influencing ultimate behaviour of plate of plate girders", Conference on Steel Bridges, June 24-30, British Constructional Steelwork Association, Institution of Civil Engineers, London.
  25. Rockey, K. C., & Skaloud, M. (1972),"The ultimate load behaviour of plate girders loaded in shear", The Structural Engineer, 50(1) 29-48.
  26. Ryu, H. K., Chang, S. P., Kim, Y. J. and Kim, B. S. (2005),"Crack control of a steel and concrete composite plate girder with prefabricated slabs under hogging moments", Eng. Struct, 27, 1613-1624. https://doi.org/10.1016/j.engstruct.2005.05.015
  27. Skaloud, M. and Rockey, K. C. (1971),"Ultimate load behaviour of plate girders loaded in shear", IABSE Proc., 1-19.
  28. Shanmugam, N. E. and Baskar, K. (2003),"Steel-concrete composite plate girders subject to shear loading", J. Struct. Eng., ASCE. USA, 129(9), 1230-1242. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:9(1230)
  29. Shanmugam, N. E. and Baskar, K. (2006),"Design of composite plate girders under shear loading", Steel Compos. Struct, 6(1), 1-14. https://doi.org/10.12989/scs.2006.6.1.001
  30. Shanmugam, N. E., Mahendrakumar, M. and Thevendran, V. (2003),"Ultimate load behaviour of horizontally curved plate girders", J. Constr. Steel Res., UK, 49(4), 509-529.
  31. Sharp, M. L., and Clark, J. W. (1971),"Thin aluminum shear web", J. Struct. Div., ASCE, 1021-1038.

피인용 문헌

  1. Shear buckling coefficient: proposal for tapered steel plates vol.167, pp.4, 2014, https://doi.org/10.1680/stbu.12.00044
  2. Structural performance of composite double beam system vol.19, pp.2, 2016, https://doi.org/10.1177/1369433215624599
  3. Web Buckling and Ultimate Strength of Composite Plate Girders Subjected to Shear and Bending vol.15, pp.02, 2015, https://doi.org/10.1142/S0219455414500473
  4. The state of the art of steel and steel concrete composite straight plate girder bridges vol.119, 2017, https://doi.org/10.1016/j.tws.2015.01.014
  5. Tapered plate girders under shear: Tests and numerical research vol.46, 2013, https://doi.org/10.1016/j.engstruct.2012.07.023
  6. Experimental study on laterally restrained steel columns with variable I cross sections vol.13, pp.3, 2012, https://doi.org/10.12989/scs.2012.13.3.225