Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

An analytical-numerical procedure for cracking and time-dependent effects in continuous composite beams under service load

  • Chaudhary, Sandeep (Department of Civil Engineering, Indian Institute of Technology) ;
  • Pendharkar, Umesh (Department of Civil Engineering, Indian Institute of Technology) ;
  • Nagpal, A.K. (Department of Civil Engineering, Indian Institute of Technology)
  • Received : 2005.05.09
  • Accepted : 2007.04.26
  • Published : 2007.06.25
⟨ Previous Next ⟩

Abstract

An analytical-numerical procedure has been presented in this paper to take into account the nonlinear effects of concrete cracking and time-dependent effects of creep and shrinkage in the concrete portion of the continuous composite beams under service load. The procedure is analytical at the element level and numerical at the structural level. The cracked span length beam element consisting of uncracked zone in middle and cracked zones near the ends has been proposed to reduce the computational effort. The progressive nature of cracking of concrete has been taken into account by division of the time into a number of time intervals. Closed form expressions for stiffness matrix, load vector, crack lengths and mid-span deflection of the beam element have been presented in order to reduce the computational effort and bookkeeping. The procedure has been validated by comparison with the experimental and analytical results reported elsewhere and with FEM. The procedure can be readily extended for the analysis of composite building frames where saving in computational effort would be very considerable.

Keywords

References

  1. Amadio, C. and Fragiacomo, M. (1997),"A simplified approach to evaluate creep and shrinkage effects in steel concrete composite beams", J. Struct. Eng., ASCE, 123(9), 1153-1162. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:9(1153)
  2. Albrecht, G., Kurita A., Rutner M. and Ohyama, O. (2003),"The long term tension stiffening at composite bridge construction", 5th Japanese-German Joint Symposium on Steel and Composite Bridges. Osaka, Sept.
  3. Bradford, M. A. and Gilbert, R. I. (1991),"Experiments on composite tee-beams at service loads", Civ. Eng. Trans, IE Aust, Australia, CE 33(4), 285-291.
  4. Bradford, M. A. and Gilbert, R. I. (1992),"Composite beams with partial interaction under service loads", J. Struct. Eng., ASCE, 118(7), 1871-1883. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:7(1871)
  5. Bradford, M. A., Manh, H. Vu. and Gilbert R. I. (2002),"Numerical analysis of continuous composite beams at service loading", Adv Struct. Eng., 5(1), 1-12. https://doi.org/10.1260/1369433021502498
  6. CEB-FIP (1990),"Model Code for Concrete Structures", CEB, Thomas Telford, London.
  7. Dezi, L. and Tarantino, A. M. (1993a),"Creep in composite continuous beams: I: Theoretical treatment", J. Struct. Eng., ASCE, 119(7), 2095-2111. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:7(2095)
  8. Dezi, L. and Tarantino, A. M. (1993b),"Creep in composite continuous beams. II: Parametric Study", J. Struct. Eng., ASCE, 119(7), 2112-2133. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:7(2112)
  9. Dezi, L., Leoni, G. and Tarantino, A. M. (1995),"Time dependent analysis of prestressed composite beams", J. Struct. Eng., ASCE, 121(4), 621-633. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(621)
  10. Dezi, L., Leoni, G. and Tarantino, A. M. (1996),"Algebraic method for creep analysis of continuous composite beams", J. Struct. Eng., ASCE, 122(4), 423-430. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(423)
  11. Elbadry, M., Youakim, S. and Ghali, A. (2003),"Model analysis of time-dependent stresses and deformations in structural concrete", Prog. Struct. Eng. Mater., 5, 153-166. https://doi.org/10.1002/pse.148
  12. Fragiacomo, M., Amadio, C. and Macorini, L. (2004),"Finite element model for collapse and long-term analysis of steel-concrete composite beams", J. Struct. Eng., ASCE, 130(3), 489-497. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(489)
  13. Ghali, A., Favre, R. and Elbadry, M. (2002),"Concrete Structures: Stresses and Deformations", Third Edition, Spon Press, London.
  14. Gilbert, R. I. (1988), Time effects in concrete structures, Elsevier, Amsterdam, The Netherlands.
  15. Gilbert, R. I. and Bradford, M. A. (1992),"Time-dependent behavior of continuous composite beams at service loads", UNICIV Rep.R-307, School of Civil Eng., Univ. of New South Wales, Sydney, Australia.
  16. Gilbert, R. I. and Bradford, M. A. (1995),"Time-dependent behavior of composite beams at service loads", J. Struct. Eng., ASCE, 121(2), 319-327. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:2(319)
  17. Kwak, G. H. and Seo, Y. G. (2000),"Long term behavior of composite girder bridges", Comput. Struct., 74(5), 583-599. https://doi.org/10.1016/S0045-7949(99)00064-4
  18. Kwak, G. H and Seo, Y. G. (2002a),"Shrinkage cracking at interior supports of continuous precast prestressed concrete girder bridges", Const. and Bldg. Mater., 16, 35-47. https://doi.org/10.1016/S0950-0618(01)00028-9
  19. Kwak, G. H. and Seo, Y. G. (2002b),"Numerical analysis of time-dependent behavior of pre-cast pre-stressed concrete girder bridges", Const. and Bldg. Mater., 16, 49-63. https://doi.org/10.1016/S0950-0618(01)00027-7
  20. Mari, A., Mirambell, E. and Estrada, I. (2003),"Effect of construction process and slab prestressing on the serviceability behavior of composite bridges", J. Const. Steel Res., 59, 135-163. https://doi.org/10.1016/S0143-974X(02)00029-9
  21. Sakr, M. and Lapos, J. (1998),"Time-dependent analysis of partially prestressed continuous composite beams", 2nd Int. PhD Symposium in Civil Eng., Budapest.

Cited by

  1. Control of Creep and Shrinkage Effects in Steel Concrete Composite Bridges with Precast Decks vol.14, pp.5, 2009, https://doi.org/10.1061/(ASCE)1084-0702(2009)14:5(336)
  2. Serviceability design of reinforced concrete members – Closed form solution vol.49, 2013, https://doi.org/10.1016/j.engstruct.2012.12.010
  3. Cracked span length beam element for service load analysis of steel concrete composite bridges vol.157, 2015, https://doi.org/10.1016/j.compstruc.2015.05.024
  4. Rapid prediction of deflections in multi-span continuous composite bridges using neural networks vol.15, pp.4, 2015, https://doi.org/10.1007/s13296-015-1211-9
  5. Guidelines for Improving the Standard Fire Resistance Test Specifications vol.6, pp.7, 2009, https://doi.org/10.1520/JAI102275
  6. Service load analysis of composite frames using cracked span length frame element vol.132, 2017, https://doi.org/10.1016/j.engstruct.2016.11.071
  7. Rapid prediction of long-term deflections in composite frames vol.18, pp.3, 2015, https://doi.org/10.12989/scs.2015.18.3.547
  8. Behavior of steel-concrete composite cantilever box beams under negative moment vol.12, pp.4, 2012, https://doi.org/10.1007/s13296-012-4005-3
  9. Control of time-dependent effects in steel-concrete composite frames vol.13, pp.4, 2013, https://doi.org/10.1007/s13296-013-4002-1
  10. Neural networks for inelastic mid-span deflections in continuous composite beams vol.36, pp.2, 2007, https://doi.org/10.12989/sem.2010.36.2.165
  11. Nonlinear analysis of service stresses in reinforced concrete sections-closed form solutions vol.10, pp.5, 2007, https://doi.org/10.12989/cac.2012.10.5.541
  12. An efficient and novel strategy for control of cracking, creep and shrinkage effects in steel-concrete composite beams vol.70, pp.6, 2019, https://doi.org/10.12989/sem.2019.70.6.751
  13. Time-dependent analysis of slender, tapered reinforced concrete columns vol.36, pp.2, 2007, https://doi.org/10.12989/scs.2020.36.2.229
  14. Free vibration of multi-cracked beams vol.79, pp.4, 2007, https://doi.org/10.12989/sem.2021.79.4.441