Steel and Composite Structures

  • 제7권1호
  • /
  • Pages.35-52
  • /
  • 2007
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Testing and finite element modeling of stressed skin diaphragms

  • Liu, Yang (Department of Building Engineering, Tongji University) ;
  • Zhang, Qilin (Department of Building Engineering, Tongji University) ;
  • Qian, Weijun (Zhejiang Jingong Steel Building Construction Group Co., Ltd.)
  • 투고 : 2005.11.15
  • 심사 : 2006.10.13
  • 발행 : 2007.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

The cold formed light-gauge profiled steel sheeting can offer considerable shear resistance acting in the steel building frame. This paper conducted the full-scale test on the shear behavior of stressed skin diaphragm using profiled sheeting connected by the self-tapping screws. A three-dimensional finite element model that simulates the stressed skin diaphragm was developed. The sheet was modeled using thin element model while the supporting members were simulated using beam elements. Fasteners were represented in the numerical model as equivalent springs. A joint test program was conducted to characterize the properties of these springs and results were reported in this study. Finite element model of the full-scale test was analyzed by use of the ANSYS package, considering nonlinearity caused by the large deflection and slip of fasteners. The experimental data was compared with the results acquired by the EUR formulas and finite element analysis.

키워드

참고문헌

  1. AISI. (1967),"Design of light gauge steel diaphragms", New York. N.Y.
  2. ANSYS Corporation (2004), Structural Analysis Guide.
  3. Bryan, E. R. (1972),"The stressed skin design of steel buildings", Grosby Lockwood Staples, London.
  4. Bryan, E. R. and El-Dakhakhi, W. M. (1968),"Shear flexibility and strength of corrugated decks", J. Struct. Div., ASCE, 94(ST11), 2549-2579.
  5. Davies, J. M. (1976),"Calculation of steel diaphragm behavior", J. Struct. Div., ASCE, 102 (ST11), 1411-1430.
  6. Davies, J. M. (1977),"Simplified diaphragm analysis", J. Struct. Div., ASCE, 103(ST11), 2093-2109.
  7. Davies, J. M. and Bryan, E. R. (1982), Manual of Stressed Skin Diaphragm Design, Granada, London.
  8. Davies, J. M. and Fisher, J. (1979),"The diaphragm action of composite slabs", Proc. Institution of Civil Engineers London, England, 67(2), 891-906. https://doi.org/10.1680/iicep.1979.2780
  9. Easley, J. T. (1975),"Bucking formulas for corrugated metal shear diaphragms", J. Struct. Div., ASCE, 101(ST7),1403-1417.
  10. Easley, J. T. (1977),"Strength and stiffness of corrugated metal shear diaphragms", J. Struct. Div., ASCE, 103(ST1),169-180.
  11. Easterling, W. S. and Porter, M. L. (1994),"Steel-deck-reinforced concrete diaphragms I", J. Struct. Eng., ASCE, 120(2), 560-576. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:2(560)
  12. ECCS (1995), European Recommendations for the Application of Metal Sheeting acting as a Diaphragm. Pub. 88, European Convention for Constructional Steelwork, Brussels.
  13. El-Dakhakhni, W. M. (1976),"Shear of light gauge partitions in the tall buildings", J. Struct. Div., ASCE, 102(ST7), 1431-1445.
  14. Fazio, P. F., Kinh, H. A. and Chockalingam, S. (1978),"Strength of cold-formed steel shear diaphragms", CanadianJ. Civ. Eng., 5-17.
  15. Luttrell, L. D. (1971),"Shear diaphragms with lightweight concrete fill", Proceedings of the 1st Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, 111-117.
  16. Nilson, A. H. (1960),"Shear diaphragms of light gage steel", J. Struct. Div., ASCE, 86(ST11), 11-139.
  17. Nilson, A. H. and Ammar, A. R. (1974),"Finite element analysis of metal deck shear diaphragms", J. Struct. Div., ASCE, 100(ST4), 711-725.

피인용 문헌

  1. Examination of Ductility and Seismic Diaphragm Design Force-Reduction Factors for Steel Deck and Composite Diaphragms vol.146, pp.11, 2007, https://doi.org/10.1061/(asce)st.1943-541x.0002797