Computers and Concrete

  • 제4권6호
  • /
  • Pages.477-497
  • /
  • 2007
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Investigation on correlation between pulse velocity and compressive strength of concrete using ANNs

  • Tang, Chao-Wei (Department of Civil Engineering & Engineering Informatics, Cheng-Shiu University) ;
  • Lin, Yiching (Department of Civil Engineering, National Chung Hsing University) ;
  • Kuo, Shih-Fang (Department of Civil Engineering, National Chung Hsing University)
  • 투고 : 2007.03.10
  • 심사 : 2007.10.11
  • 발행 : 2007.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The ultrasonic pulse velocity method has been widely used to evaluate the quality of concrete and assess the structural integrity of concrete structures. But its use for predicting strength is still limited since there are many variables affecting the relationship between strength and pulse velocity of concrete. This study is focused on establishing a complicated correlation between known input data, such as pulse velocity and mixture proportions of concrete, and a certain output (compressive strength of concrete) using artificial neural networks (ANN). In addition, the results predicted by the developed multilayer perceptrons (MLP) networks are compared with those by conventional regression analysis. The result shows that the correlation between pulse velocity and compressive strength of concrete at various ages can be well established by using ANN and the accuracy of the estimates depends on the quality of the information used to train the network. Moreover, compared with the conventional approach, the proposed method gives a better prediction, both in terms of coefficients of determination and root-mean-square error.

키워드

참고문헌

  1. Andersen, J. and Nerenst, P. (1952), "Wave velocity in concrete", J. ACI, 48(8), 613-636.
  2. ASTM C 597-97 (1998), Standard Test Method for Pulse Velocity through Concrete, Annual Book of ASTM Standards, Easton, MD, USA.
  3. ASTM C 39-96 (1998), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, Annual Book of ASTM Standards, Easton, MD, USA.
  4. Chung, H. W. and Law, K. S. (1983), "Diagnosing in situ concrete by ultrasonic pulse technique", Concrete Int., 13(10), 42-49.
  5. Dayhoff, J. (1990), Neural Networks Architecture, New York: Van Nostrand Reinhold.
  6. Demirboga, R., Turkmen I. and Karakoc M. B. (2004), "Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete", Cement Concrete Res., 34(12), 2329?2336. https://doi.org/10.1016/j.cemconres.2004.04.017
  7. Fausset, L. (1994), Fundamental of Neural Networks, Prentice-Hall, Englewood Cliffs, N.J., 1994.
  8. Galan, A. (1967), "Estimate of concrete strength by ultrasonic pulses velocity and damping constant", ACI J. 64(10), 678-684.
  9. Ghaboussi, J., Garrett, J. H. and Wu, X. (1991), "Knowledge-based modeling of material behavior with neural networks", J. Eng. Mech., ASCE, 117(1), 129-134.
  10. Hossain, K. M. A., Lachemi, M. and Easa, S. M. (2006), "Artificial neural network model for the strength prediction of fully restrained RC slabs subjected to membrane action", Comput. Concrete, 3(6), 439-454. https://doi.org/10.12989/cac.2006.3.6.439
  11. Jones, R. and Gatfield, E. N. (1955), "Testing concrete by an ultrasonic pulse technique", DSIR Road Research, Tech. Paper No. 34, London, H.M.S.O.
  12. Kewalramani, M. A. and Gupta, R. (2006), "Concrete compressive strength prediction using ultrasonic pulse velocity through artificial neural networks", Automation in Construction, 32, 374-379.
  13. Kheder, G. (1998), "Assessment of in situ concrete strength using combined nondestructive testing", Proceedings of the First international Arab Conference on Maintenance and Rehabilitation of Concrete Structures, Cairo, 59-75.
  14. Liang, M. T. and Wu, J. (2002), "Theoretical elucidation on the empirical formulae for the ultrasonic testing method for concrete structures", Cement Concrete Res., 32(11), 1763-1769. https://doi.org/10.1016/S0008-8846(02)00866-9
  15. Lin. Y., Lai, C. P. and Yen, T. (2003), "Prediction of ultrasonic pulse velocity (UPV) in concrete", ACI Mater. J., 100(1), 21-28.
  16. Phoon, K. K., Wee, T. H. and Loi, C. S. (1999), "Development of statistical quality assurance criterion for concrete using ultrasonic pulse velocity method", ACI Mater. J., 96(5), 568-573.
  17. Popovics, S., Rose, J. L., John, S. and Popovics, J. S. (1990), "The behavior of ultrasonic pulses in concrete", Cement Concrete Res., 20(2), 259-270. https://doi.org/10.1016/0008-8846(90)90079-D
  18. Rumelhart, D. E., Hinton, G. E., and Williams, R. J. (1986), "Learning internal representation by error propagation", Parallel Distributed Processing, 1, 318-362.
  19. Shikh, M. E. (1998), "Very high strength of special concrete evaluated by pulse velocity", Proceedings of the 1st international Arab Conference on Maintenance and Rehabilitation of Concrete Structures, Cairo, 79-105.
  20. Sturrup, V. R., Vecchio, F. J., and Caratin, H. (1984), "Pulse velocity as a measure of concrete compressive strength. In situ/nondestructive testing of concrete", ACI SP-82, 01-227.
  21. Tang, C. W., Chen, H. J., and Yen, T. (2003), "Modeling the confinement efficiency of reinforced concrete columns with rectilinear transverse steel using artificial neural networks", J. Struct. Eng., ASCE, June, 129(6), 775-783. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:6(775)
  22. Tang, C. W. (2006), "Using radial basis function neural networks to model torsional strength of reinforced concrete beams", Comput. Concrete, 3(5), 335-355. https://doi.org/10.12989/cac.2006.3.5.335
  23. Yeh, I. C. (1999), "Design of high-performance concrete mixture using neural networks and nonlinear programming", J. Comput. in Civil Eng., ASCE, 13(1), 36-42. https://doi.org/10.1061/(ASCE)0887-3801(1999)13:1(36)
  24. Yun, C., Choi, K., Kim, S., and Song, Y. (1988), "Comparative evaluation of nondestructive test methods for inplace strength determination", Nondestructive Testing, ACI SP-112, 111-136.
  25. Zurada, L. (1992), Introduction to Artificial Neural Systems, West Publ. Co., USA.
  26. Zhao, Z. and Ren, L. (2002), "Failure criterion of concrete under triaxial stresses using neural networks", Computer-Aided Civ. Infrast. Eng., 17(1), 68-73. https://doi.org/10.1111/1467-8667.00254

피인용 문헌

  1. MOE prediction in Abies pinsapo Boiss. timber: Application of an artificial neural network using non-destructive testing vol.87, pp.21-22, 2009, https://doi.org/10.1016/j.compstruc.2009.08.010
  2. Efficient single-step time-dependent analysis of PC structures vol.165, pp.2, 2012, https://doi.org/10.1680/eacm.10.00030
  3. Comparison of modelling using regression techniques and an artificial neural network for obtaining the static modulus of elasticity of Pinus radiata D. Don. timber by ultrasound vol.96, 2016, https://doi.org/10.1016/j.compositesb.2016.04.036
  4. Comparison of ANN and RKS approaches to model SCC strength vol.310, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/310/1/012037
  5. Modeling the Fresh and Hardened Stage Properties of Self-Compacting Concrete using Random Kitchen Sink Algorithm vol.12, pp.1, 2018, https://doi.org/10.1186/s40069-018-0246-7
  6. Modeling the effects of additives on rheological properties of fresh self-consolidating cement paste using artificial neural network vol.8, pp.3, 2007, https://doi.org/10.12989/cac.2011.8.3.279
  7. Artificial neural network calculations for a receding contact problem vol.25, pp.6, 2007, https://doi.org/10.12989/cac.2020.25.6.551