Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Nonlinear analysis of RC beams based on simplified moment-curvature relation considering fixed-end rotation

  • Kim, Sun-Pil (Hyundai Development Institute of Construction Technology)
  • Received : 2007.03.10
  • Accepted : 2007.10.11
  • Published : 2007.12.25
⟨ Previous Next ⟩

Abstract

A simple analytical procedure to analyze reinforced concrete (RC) beams with cracked section is proposed on the basis of the simplified moment-curvature relations of RC sections. Unlike previous analytical models which result in overestimation of stiffness and underestimation of structural deformations induced from assuming perfect-bond condition between steel and concrete, the proposed analytical procedure considers fixed-end rotation caused by anchorage. Furthermore, the proposed analytical procedure, compared with previous numerical models, promotes effectiveness of analysis by reflecting several factors which can influence nonlinearity of RC structure into the simplified moment-curvature relation. Finally, correlation studies between analytical and experimental results are conducted to establish the applicability of the proposed analytical procedure to the nonlinear analysis of RC structures.

Keywords

References

  1. Assa, B. and Nishiyama, M. (1998), "Prediction of load-displacement curve of high-strength concrete columns under simulated seismic loading", ACI Struct. J., 95(5), 547-557.
  2. Ayoub, A. and Filippou, F. C. (1999), "Mixed formulation of bond-slip problems under cyclic loads", J. Struct. Eng., 125(6), 661-671. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(661)
  3. Bayrak, O. and Sheikh, S. A. (1997), "High-strength concrete columns under simulated earthquake loading", ACI Struct. J., 94(6), 708-722.
  4. Chen, W. F. (1982), Plasticity in Reinforced Concrete, McGraw-Hill Book Company.
  5. Clough, R. W. and Johnston, S. B. (1966), "Effect of stiffness degradation on earthquake ductility requirements", Proceedings of Japan Earthquake Engineering Symposium, October.
  6. De Groot, A. K., Kusters, G. M. A. and Monnier, T. (1981), "Numerical modeling of bond-slip behavior", Concrete Mech., 26(1B), 6-38.
  7. Dowell, R. K., Seible, F. and Wilson, E. L. (1998), "Pivot hysteresis model for reinforced concrete members", ACI Struct. J., 95(5), 607-617.
  8. Eligehausen, R., Popov, E. P. and Bertero, V. V. (1983), "Local bond stress-slip relationships of deformed bars under generalized excitations", Report No. UCB/EERC 83-23. Earthquake Engineering Research Center, University of California, Berkeley.
  9. Gergely, P. and Lutz. L. A. (1973), "Maximum crack width in reinforced concrete flexural members", ACI Special Publication SP-20, 87-117.
  10. Hayashi, S. and Kokusho, S. (1985), "Bond behavior in the neighborhood of the crack", Proceedings of the U.S.-Japan Joint Seminar on Finite Element Analysis of Reinforced Concrete, Tokyo, 364-373.
  11. Keshavarzian, M. and Schnobrich, W. C. (1984), "computed nonlinear seismic response of R/C wall-frame structures", Structural Research Series No. 515, University of Illinois, Urbana, IL.
  12. Kwak, H. G., and Filippou, F. C. (1990), "Finite element analysis of reinforced concrete structures under monotonic loads", Report No. UCB/SEMM-90/14, Structural Engineering Mechanics and Materials, University of California, Berkeley, CA.
  13. Kwak, H. G., Kim, S.-P. and Kim, J.-E. (2004), "Nonlinear dynamic analysis of RC frames using cyclic momentcurvature relation", Struct. Eng. Mech., 17(3-4), 357-378. https://doi.org/10.12989/sem.2004.17.3_4.357
  14. Kwak, H. G., Kim, J. H. and Kim, S. H. (2006), "Nonlinear analysis of prestressed concrete structures considering slip behavior of tendons", Comput. Concrete, 3(1), 43-64. https://doi.org/10.12989/cac.2006.3.1.043
  15. Kwak, H. G. and Kim, S. P. (2001), "Nonlinear analysis of RC beams subject to cyclic loadings", J. Struct. Eng., ASCE, 127(12), 1436-1444. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:12(1436)
  16. Kwak, H. G. and Kim, S. P. (2002a), "Cyclic moment-curvature relation of RC beam", Mag. Concrete Res., 54(6), 435-447. https://doi.org/10.1680/macr.2002.54.6.435
  17. Kwak, H. G. and Kim, S. P. (2002b), "Monotonic moment-curvature relation of RC beam", Mag. Concrete Res., 54(6), 423-434. https://doi.org/10.1680/macr.2002.54.6.423
  18. Kwak, H. G. and Kim, S. P. (2002c), "Nonlinear analysis of RC beams based on moment-curvature Relation", Comput. Struct., 80(6), 615-628. https://doi.org/10.1016/S0045-7949(02)00030-5
  19. Low, S. S. and Moehle, J. P. (1987), "Experimental study of reinforced concrete columns subjected to multi-axial cyclic loading", Earthquake Engingeering Research Center Report No. EERC 87-14, University of California, Berkeley, CA.
  20. Ma, S. M., Bertero, V. V. and Popov, E. P. (1976), "Experimental and analytical studies on the hysteretic behavior of reinforced concrete rectangular and T-Beam", Earthquake Engineering. Research Center Report No. EERC 76-2, University of California, Berkeley, CA.
  21. Monti, G., Filippou, F. C. and Spacone, E. (1997) "Analysis of hysteretic behavior of anchored reinforcing bars", ACI Struct. J., 94(2), 248-261.
  22. Monti, G., Filippou, F. C. and Spacone, E. (1997) "Finite element for anchored bars under cyclic load reversals", J. Struct. Eng., 123(5), 614-623. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(614)
  23. Ngo, D. and Scordelis, A. C. (1967) "Finite element analysis of reinforced concrete beams", ACI J., 64(3), 152-163.
  24. Owen, D. R. J. and Hinton, E. (1980) Finite Elements in Plasticity, Pineridge Press Limited.
  25. Park, R., Kent, D. C. and Sampson, R. A. (1972) "Reinforced concrete members with cyclic loading", J. Struct. Div., ASCE, 98(ST7), 1341-1360.
  26. Park, R. and Paulay, T. (1975) Reinforced Concrete Structures, John Wiley & Sons.
  27. Roufaiel, M. S. L. and Meyer, C. (1987) "Analytical modeling of hysteretic behavior of reinforced concrete frame", J. Struct. Eng., 113(3), 429-444. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:3(429)
  28. Saatcioglu, M. and Ozcebe, G. (1989) "Response of reinforced concrete columns to simulated seismic loading", ACI Struct. J., 86(1), 3-12.
  29. Sawyer, H. A. (1964) "Design of concrete frames for two failure states", Proceedings of the International Symposium on the Flexural Mechanics of Reinforced Concrete, ASCE-ACI, Miami, November, 405-431.
  30. Scott, B. D., Park, R. and Priestley, M. J. N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", ACI J., 79(1), 13-27.
  31. Soroushian, P., Obaseki, K., Nagi, M. and Rojas, M. (1988) "Pullout behaviour of hooked bars in exterior beamcolumn connections", ACI Struct. J. 85(3), 269-276.
  32. Takeda, T., Sozen, M. A. and Nielsen, N. N. (1970) "Reinforced concrete response to simulated earthquake", J. Struct. Div., ASCE, 96(12), 2257-2573.
  33. Taucer, T., Spacone, E. and Filippou, F. C. (1991), "A fiber beam-column element for seismic response analysis of reinforced concrete structures", Earthquake Engineering. Research Center Report No. EERC 91-17, University of California, Berkeley, CA.
  34. Wight, J. K. and Sozen, M. A. (1975) "Strength decay of RC columns under shear reversals", J. Struct. Div., ASCE, 101(ST-5), 1053-1065.

Cited by

  1. Expanding the classic moment-curvature relation by a new perspective onto its axial strain vol.11, pp.6, 2013, https://doi.org/10.12989/cac.2013.11.6.515
  2. Maximum concrete stress developed in unconfined flexural RC members vol.8, pp.2, 2007, https://doi.org/10.12989/cac.2011.8.2.207
  3. Minimum deformability design of high-strength concrete beams in non-seismic regions vol.8, pp.4, 2007, https://doi.org/10.12989/cac.2011.8.4.445
  4. Automated design of optimum longitudinal reinforcement for flexural and axial loading vol.10, pp.2, 2007, https://doi.org/10.12989/cac.2012.10.2.149