DOI QR코드

DOI QR Code

Seismic behavior of strengthened reinforced concrete coupling beams by bolted steel plates, Part 1: Experimental study

  • Zhu, Y. (Earthquake Engineering Research Test Centre, The University of Guang Zhou) ;
  • Su, R.K.L. (Department of Civil Engineering, The University of Hong Kong) ;
  • Zhou, F.L. (Earthquake Engineering Research Test Centre, The University of Guang Zhou)
  • 투고 : 2006.11.07
  • 심사 : 2007.04.06
  • 발행 : 2007.09.30

초록

An experimental study of five full-scale coupling beam specimens has been conducted to investigate the seismic behavior of strengthened RC coupling beams by bolted side steel plates using a reversed cyclic loading procedure. The strengthened coupling beams are fabricated with different plate thicknesses and shear connector arrangements to study their respective effects on load-carrying capacity, strength retention, stiffness degradation, deformation capacity, and energy dissipation ability. The study revealed that putting shear connectors along the span of coupling beams produces no significant improvement to the structural performance of the strengthened beams. Translational and rotational partial interactions of the shear connectors that would weaken the load-carrying capacity of the steel plates were observed and measured. The hierarchy of failure of concrete, steel plates, and shear connectors was identified. Furthermore, detailed effects of plate buckling and various arrangements of shear connectors on the post-peak behavior of the strengthened beams are discussed.

키워드

참고문헌

  1. Ahmed, M., Oehlers, D.J. and Bradford, M.A. (2000), 'Retrofitting reinforced concrete beams by bolting steel plates to their sides, Part 1: Behavior and experiments', Struct. Eng. Mech., 10(3), 211-226 https://doi.org/10.12989/sem.2000.10.3.211
  2. Barnes, B.A., Baglin, P.S., Mays, G.C. and Subedi, N.K. (2001), 'External steel plate systems for the shear strengthening of reinforced concrete beams', Eng. Struct., 23, 1162-1176 https://doi.org/10.1016/S0141-0296(00)00124-3
  3. BSI (1985), 'BS8110 Part 1: Code of practice for design and construction, structural use of concrete', British Standards Institution, London
  4. BSI (1990), 'BS5950 Structural use of steelwork in building, Part 3: Design in composite construction, Section 3.1: Code of Practice for Design of Simple and Continuous Composite Beams', British Standards Institution, London
  5. Chaallal, 0., Gauthier, D. and Malenfant, P. (1996), 'Classification methodology for coupled shear walls', J. Struct. Eng., 122(12), 1453-1458 https://doi.org/10.1061/(ASCE)0733-9445(1996)122:12(1453)
  6. Collins, M.P. and Mitchell, D. (1991), Prestressed Concrete Structures, Prentice Hall, Englewood Cliffs, NJ
  7. Foley, C.M. and Buckhouse, E.R. (1999), 'Method to increase capacity and stiffness of reinforced concrete beams', Practical Periodical on Structural Design and Construction, 4(1), 36-42 https://doi.org/10.1061/(ASCE)1084-0680(1999)4:1(36)
  8. Galano, L. and Vignoli, A. (2000,) 'Seismic behavior of short coupling beams with different reinforcement layouts', ACI Struct. J., 97(6), 876-885
  9. Harries, K.A. (2001) 'Ductility and deformability of coupling beams in reinforced concrete coupled wall', J. Earthq. Spectra, 17(3), 457-478 https://doi.org/10.1193/1.1586184
  10. Harries, K.A., Cook, W.D. and Mitchell, D. (1996), 'Seismic retrofit of reinforced coupling beams using steel plates', ACI SP-160, June 1, 93-114
  11. Jones, R., Swamy, R.N. and Ang, T.H. (1982), 'Under- and over-reinforced concrete beams with glued steel plates', Int. J. Cement Compos. Lightweight Concrete, 4(1), 19-32 https://doi.org/10.1016/0262-5075(82)90004-5
  12. Kwan, A.K.H. and Zhao, Z.Z. (2002a), 'Cyclic behavior of deep reinforced concrete coupling beams', Proc. of the Institution of Civil Engineers, Structures and Buildings, 152(3), 283-293
  13. Kwan, A.K.H. and Zhao, Z.Z. (2002b), 'Testing of coupling beams with equal end rotation maintained and local joint deformation allowed', Proc. of the Institution of Civil Engineers-structures and Buildings, 152(1), 67-78
  14. L'Hermite, R. and Bresson, J. (1967), 'Concrete reinforced with glued plates', RILEM International Symposium, Synthetic Resins in Building Construction, Paris, 175-203
  15. Lin, W.S. and Kao, C.C. (2003), 'Nonlinear finite element 2d analysis for RC beams strengthened by epoxy bonded steel plates', Chinese J. Mechanics-Series A, 19(4),409-419
  16. Oehlers, D.J. (1992), 'Reinforced concrete beams with plates glued to their soffits', J. Struct. Eng., ASCE, 118(8), 2023-2038 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:8(2023)
  17. Oehlers, D.J. and Bradford, M.A. (1995), 'Composite steel and concrete structural members: Fundamental behavior', Pergamon Press, Oxford, England, November
  18. Oehlers, D.J. and Bradford, M.A. (1999), 'Elementary behavior of composite steel and concrete structural members', Butterworth Heinemann, Oxford, England
  19. Oehlers, D.J. and Moran, J.P. (1989), 'Premature failure of externally plated reinforced concrete beams', J. Struct. Eng., 116(4), 978-995 https://doi.org/10.1061/(ASCE)0733-9445(1990)116:4(978)
  20. Oehlers, D.J., Nguyen, N.T. and Bradford, M.A. (2000a), 'Retrofitting by adhesive bonding steel plates to the sides ofRC beams, Part 1: Debonding of plates due to flexure', Struct. Eng. Mech., 9(5), 491-504 https://doi.org/10.12989/sem.2000.9.5.491
  21. Oehlers, D.J., Nguyen, N.T. and Bradford, M.A. (2000b), 'Retrofitting by adhesive bonding steel plates to the sides of RC beams, Part 2: Debonding due to shear and design rules', Struct. Eng. Mech., 9(5), 505-518 https://doi.org/10.12989/sem.2000.9.5.505
  22. Pala, S. and Ozmen, G. (1995), 'Effective stiffness of coupling beams in structural walls', Comp. Struct., 54(5), 925-931 https://doi.org/10.1016/0045-7949(94)E0251-V
  23. Paulay, T. and Bull, I.N. (1971), 'Shear effects on plastic hinges of earthquake resisting reinforced concrete frames', Struct. Concrete Seismic Actions, 165-172
  24. Stafford Smith, B. and Coull, A. (1991), Tall Building Structures: Analysis and Design, John Wiley & Sons, Inc
  25. Su, R.K.L. and Zhu, Y. (2005), 'Experimental and numerical analyses of external steel plate strengthened reinforced Concrete Coupling Beams', Eng. Struct., 27(10), 1537-1550 https://doi.org/10.1016/j.engstruct.2005.04.012
  26. Subedi, N.K. (1991), 'RC-coupled shear wall structures, I: analysis of coupling beams', J. Struct. Eng., 117(3), 667-680 https://doi.org/10.1061/(ASCE)0733-9445(1991)117:3(667)
  27. Subedi, N.K. and Baglin, P.S. (1998), 'External plate reinforcement for concrete beams', J. Struct. Eng., 124(12), 1490-1495 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1490)
  28. Subedi, N.K., Marsono, A.K. and Aguda, G. (1999), 'Analysis of reinforced concrete coupled shear wall structures', Struct. Des. Tall Build., 8, 117-143 https://doi.org/10.1002/(SICI)1099-1794(199906)8:2<117::AID-TAL124>3.0.CO;2-7
  29. Taljsten, B. (1995), 'Strengthening of structures using epoxy bounded steel or fibre reinforced plastic plates', IABSE Extending the Lifespan of Structures, August 1995, San Francisco, 1173-1178
  30. Tassios, T.P., Moretti, M. and Bezas, A. (1996), 'On the behavior and ductility of reinforced concrete coupling beams of shear walls', ACI Struct. J., 93(6), 711-720
  31. Tegos, I.A. and Penelis, G.G. (1988), 'Seismic resistance of short columns and coupling beams reinforced with inclined bars', ACI Struct. J., 85(1), 82-88
  32. Uy, B. (2002), 'Strength of reinforced concrete columns bonded with external steel plates', Mag. Concrete Res., 54(1), 61-76 https://doi.org/10.1680/macr.54.1.61.40802
  33. Wang, W.H., Fu, X.D. and Ni, Y. (1992), 'Behavior of ceramite concrete coupling beams in shear wall structures under reversed cyclic loading', (in Chinese) J. Build. Struct., 13(1), 71-78

피인용 문헌

  1. Retrofit of Deep Concrete Coupling Beams by a Laterally Restrained Side Plate vol.137, pp.4, 2011, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000276
  2. Behavior of strengthened reinforced concrete coupling beams by bolted steel plates, Part 2: Evaluation of theoretical strength vol.34, pp.5, 2010, https://doi.org/10.12989/sem.2010.34.5.563
  3. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2007, https://doi.org/10.12989/sem.2011.40.4.541
  4. Strengthening of reinforced concrete beams with epoxy-bonded perforated steel plates vol.44, pp.6, 2007, https://doi.org/10.12989/sem.2012.44.6.735
  5. A piecewise linear transverse shear transfer model for bolted side-plated beams vol.62, pp.4, 2017, https://doi.org/10.12989/sem.2017.62.4.443
  6. Flexural capacity model for RC beams strengthened with bolted side-plates incorporating both partial longitudinal and transverse interactions vol.168, pp.None, 2007, https://doi.org/10.1016/j.engstruct.2018.04.069
  7. An Experimental and Numerical Study on the Flexural Performance of Over-Reinforced Concrete Beam Strengthening with Bolted-Compression Steel Plates: Part II vol.10, pp.1, 2020, https://doi.org/10.3390/app10010094
  8. Influence of Further Corrosion on Structural Behavior of Corroded Reinforced-Concrete Beam Strengthened with Steel Plate Using Different Strengthening Schemes vol.34, pp.2, 2020, https://doi.org/10.1061/(asce)cf.1943-5509.0001402
  9. Seismic Retrofitting of Reinforced-Concrete Coupled Shear Walls: A Review vol.25, pp.3, 2007, https://doi.org/10.1061/(asce)sc.1943-5576.0000489