Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Dynamic response for electromechanical integrated toroidal drive to electric excitation

  • Xu, Lizhong (Mechanical Engineering Institute, Yanshan University) ;
  • Hao, Xiuhong (Mechanical Engineering Institute, Yanshan University)
  • Received : 2006.03.28
  • Accepted : 2007.02.22
  • Published : 2007.08.20
⟨ Previous Next ⟩

Abstract

In this paper, the equivalent exciting force caused by electric excitation is derived. By dividing load and displacement vectors into mean values and time-varying ones, the dynamic equations of the system are transformed into linear ones for time-varying portion of the displacements. The analytical equations of the forced time responses of the drive system to electric excitations are obtained. Using the Laplace transformation, the transfer function of the drive system is obtained. These equations are used to analyze the time and frequency responses of the drive system to the electric excitation. It is known that electric excitation can cause forced responses of the drive system, the total dynamic responses are decided by three phase exciting voltages, exciting frequency and natural frequencies of the drive system, and the drive parameters have obvious influence on the time and frequency responses.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Atallah, K., Calverley, S.D. and Howe, D. (2004), 'Design, analysis and realisation of a high-performance magnetic gear', IEE Proc.: Electric Power Applications, 151(2), March, 135-143
  2. Barth, Oliver (2000), 'Harmonic piezodrive-miniaturized servo motor', Mechatronics, 10, 545-554 https://doi.org/10.1016/S0957-4158(99)00062-8
  3. Da Lio, M., Nista, A. and Viola, F. (1994), 'Electromagnetic harmonic motor with continuous control of position and torque', Proc. of the 27th Applications in the Transportation Industries: Archen, German, Aug., 487-491
  4. Kuehnle, M.R. (1966), Toroidgetriebe. Urkunde uber die Erteilung des deutschen Patents, 1301682
  5. Kuehnle, M.R. (1988), 'Toroidal drive system and method of assembling same', United States Patent, 5784923
  6. Kuehnle, M.R. (1999), 'Toroidal transmission and method and apparatus for making and assembling same', United States. Patent, 5863273
  7. Kuehnle, M.R., Peeken, H., Troeder, H. and Cerniak, S. (1981), 'The toroidal drive', Mech. Eng., 32(2), 32-39
  8. Okano, Makoto, Tsurumoto, Katsuo, Togo, Shinichi, Tamada, Noriharu, and Fuchino, Shuichiro (2002), 'Characteristics of the magnetic gear using a bulk high- Tc superconductor', IEEE T. Appl. Supercon., 12(1), 979-983 https://doi.org/10.1109/TASC.2002.1018564
  9. Rasmussen, P.O., Andersen, T.O., Joergensen, F.T. and Nielsen, O. (2003), 'Development of a high performance magnetic gear', Conf. Record - IAS Annual Meeting (IEEE Industry Applications Society), 3, 1696-1702
  10. Shang, Zhenguo and You, Zhuping (1997), 'Control system for magnetic type harmonic gear drive', Zhizao Jishu Yu Jichuang/Manuf Technol. Mach. Tool (in Chinese), 2, 7-10
  11. Xu, L. (2004), 'Efficiency for toroidal drive', Proc. of the 11th World Congress in Mechanism and Machine Science, Tianjin, China, April, 737-740
  12. Xu, L. and Huang, J. (2005), 'Torques for electromechanical integrating toroidal drive', Proc. of the I MECH E Part C J. Mech. Eng. Sci., 219(8),801-811
  13. Xu, L. and Huang, Z. (2003), 'Contact stresses for toroidal drive', J. Mech. Design -T. ASME, 125(3), 165-168 https://doi.org/10.1115/1.1543990
  14. Xu, L., Huang, Z. and Yulin Yang (2004), 'Mesh theory for toroidal drive', J. Mech. Design -T. ASME, 126(3), 551-557 https://doi.org/10.1115/1.1711824
  15. Yao, L., Dai, J.S. and Li, H. (2004), 'Mathematical modelling and manufacturing of the internal Toroidal tooth profile', J. Mech. Eng. Sci., Proc., IMechE, Part C, 218(9), 1043-1051
  16. Yao, L., Dai, J.S., Wei, G and Li, H. (2005), 'Geometric modeling and meshing characteristics of the toroidal drive', J. Mech. Design -T. ASME, 127(5), 988-996 https://doi.org/10.1115/1.1906248
  17. Yao, L., Dai, J.S., Wei, G. and Li, H. (2006), 'Comparative analysis of meshing characteristics with respect to different meshing rollers of the toroidal drive', Mech. Mach. Theory, 41(7), 586-604
  18. Yao, L., Dai, J.S., Wei, G. and Li, H. (2006), 'Error analysis and compensation for meshing contact of toroidal drives', J. Mech. Design -T. ASME, 128(3), 1000-1010
  19. Yao, L., Wei, G. and Lan, Z. (2005), 'Comparative study on machining the internal stationary Toroidal Gear', Key Eng. Mater., Adv. Abrasive Technol., 291-292, 483-488 https://doi.org/10.4028/www.scientific.net/KEM.291-292.483

Cited by

  1. Dynamics of mechanical system for electromechanical integrated toroidal drive under electric disturbance vol.21, pp.4, 2014, https://doi.org/10.1007/s11771-014-2066-5
  2. Bifurcation and chaotic vibration in electromechanical integrated toroidal drive vol.21, pp.8, 2015, https://doi.org/10.1177/1077546313499388
  3. Double displacement coupled forced response for electromechanical integrated electrostatic harmonic drive vol.29, pp.5, 2008, https://doi.org/10.12989/sem.2008.29.5.581