DOI QR코드

DOI QR Code

Interlaminar stresses and delamination of composite laminates under extension and bending

  • 투고 : 2005.03.04
  • 심사 : 2006.09.19
  • 발행 : 2007.04.20

초록

The metis element method (Hung 1978) has been applied to analyse free edge interlaminar stresses and delamination in composite laminates, which are subjected to extension and bending. The paper recalls Lekhnitskii's solution for generalized plane strain state of composite laminate and Wang's singular solution for determination of stress singularity order and of eigen coefficients $C_m$ for delamination problem. Then the formulae of metis displacement finite element in two-dimensional problem are established. Computation of the stress intensity factors and the energy release rates are presented in details. The energy release rate, G, is computed by Irwin's virtual crack technique using metis elements. Finally, results of interlaminar stresses, the three stress intensity factors and the energy release rates for delamination crack in composite laminates under extension and bending are illustrated and compared with the literature to demonstrate the efficiency of the present method.

키워드

참고문헌

  1. Byron, R. and Pagano, N.J. (1970), 'Interlaminar stresses in composite laminates under uniform axial extension', J. Compos. Mater., 4,538-548 https://doi.org/10.1177/002199837000400409
  2. Cho, Maenghyo and Kim, Heung Soo (2000), 'Iteractive free-edge stress analysis of composite laminates under extension, bending, twisting and thermal loadings', Int. J. Solids Struct., 37, 435-459 https://doi.org/10.1016/S0020-7683(99)00014-1
  3. Davi, G. and Milazzo, A. (1999), 'Bending stress fields in composite laminate beams by a boundary integral formulation', Comput. Struct., 71, 267-276 https://doi.org/10.1016/S0045-7949(98)00228-4
  4. De Saxce, G. (1992), 'Conception d'un element fini hybride metis monocouche pour la modeIisation du delaminage dans les materiaux composites', rapport interne du service M.M.S. de la EP.Ms, Projet Multimateriaux, October 1992
  5. De Saxce, G. and Kang, C.H. (1992), 'Application of the hybrid mongrel displacement finite element method to computation of stress intensity factors in anisotropic material', January, 41(1), 71-83
  6. Fleury, C., Nguyen, D.H., Guerlement, G. and Fryns, G(1994), 'Developpement et validation de modeles pour la caracterisation des proprietes mecaniques et la description des mecanismes d'endommagement de structures en materiaux composites', Rapport SF-193, Universite de Liege
  7. Kang, Chi-Hang (1991), 'Une famille d'elements hybrides singuliers pour l'etude des plaques fissurees metalliques et composites', These de doctorat, Universite de Technologie de Compiegne
  8. Kim, K.S. and Hong, C.S. (1985), 'Characteristics of free edge delamination in angle-ply laminate', Fifth International Conference on Composite Materials ICCM-V, July 29 - August 1,347-361
  9. Lekhnitskii, S.G. (1963), 'Theory of elasticity of an anisotropic body', holden-day, San/Fransco, California, USA
  10. Nguyen, Dang Hung (1978), 'On the monotony and the convergence of a special class of hybrid finite element: the mongrel element', Variational Methods in Mechanics of Solids (Ed. by S. Nemat-Nasser), Pergamon
  11. Nguyen, Dang Hung and Tran, Thanh Ngoc (2004), 'Analysis of cracked plates and shells using 'metis' finite element model', Finite Elem. Anal. Des. (Elsevier), 40, 855-878
  12. Nguyen, Dang Hung, De Saxce, G. and Kang, C.H. (1991), 'The computation of 2-D stress intensity factors using a hybrid mongrel displacement finite elements', Eng. Fract. Mech., 38, 197-205 https://doi.org/10.1016/0013-7944(91)90082-C
  13. Nguyen, Dang Hung, Tran, Thanh Ngoc and Nguyen, Tai Trung (2002), 'Analysis of uncracked and cracked plate bending problem using metis finite element model', Proc. 7th Nat. Congr. On Mech., Hanoi, December 18-20, 262-270
  14. Nguyen, Tien Duong and Nguyen, Dang Hung (2004), 'Calculation of free edge stress for composite laminates by metis element method', International Conference: Mecanique pour l'Ingenieur 2004 - Ho Chi Minh City Vietnam August 16-20
  15. Nguyen, Tien Duong and Nguyen, Dang Hung (2004), 'Using metis model to solve torsion problem of prismatic bar', The 7th National Congress on Deformation Solid Mechanics - Do Son, Vietnam 27-28 August 2004
  16. Nguyen, Tien Duong and Nguyen, Dang Hung, 'Computation of interlaminar stresses using Metis elements', submitted to the Journal 'Struct. Eng. Mech.'
  17. Nguyen, Tien Duong and Nguyen, Dang Hung, 'Direct and indirect metis element methods for edge delamination in laminates', Paper $N^{\circ}$ 317, COMPUTATIONAL MECHANICS WCCM VI in Conjunction with APCOM'04, Sept. 5-10, 2004, Beijing, China ${\circledC}$ 2004 Tsinghua University Press & Springer-Verlag
  18. Qian, W. and Sun, C.T. (1997), 'Calculation of stress intensity factors for interlaminar cracks in composite laminates', Compos. Sci. Technol., 57, 637-650 https://doi.org/10.1016/S0266-3538(97)00006-7
  19. Raju, I.S., Crews, J.H. and Aminpour, M.A. (1988), 'Convergence of strain energy release rate components for edge-delaminated composite laminates', Eng. Fract. Mech., 30(3), 383-396 https://doi.org/10.1016/0013-7944(88)90196-8
  20. Rotem, A. and Hashin, Z. (1975), 'Faillure modes of angle ply laminates', J. Compos. Mater., 9, 191-206 https://doi.org/10.1177/002199837500900209
  21. Tahani, Masoud and Nosier, Asghar (2003), 'Three-dimensional interlaminar stress analysis at free edges of general cross-ply composite laminates', Mater. Design, 24, 121-130 https://doi.org/10.1016/S0261-3069(02)00107-3
  22. Tian, Zongshu, Zhao, Fengdong and Yang, Qingping (2004), 'Straight free-edge effects in laminated composites', Finite Elem. Anal. Des., 41, 1-14 https://doi.org/10.1016/j.finel.2004.03.004
  23. Wang, S.S. (1984), 'Edge delamination in angle-ply composite laminates', A.I.A.A. J., 22, 256-264 https://doi.org/10.2514/3.48442
  24. Ye, Lin (1990), 'Some characteristics of distributions of free-edge interlaminar stresses in composite laminates', Int. J. Solids St.ruct., 26, 331-351 https://doi.org/10.1016/0020-7683(90)90044-V

피인용 문헌

  1. Stress analysis in transverse loading of soft core sandwich plates with various boundary conditions vol.22, pp.8, 2007, https://doi.org/10.1177/1099636218816107