DOI QR코드

DOI QR Code

Frictionless contact problem for a layer on an elastic half plane loaded by means of two dissimilar rigid punches

  • Received : 2004.11.16
  • Accepted : 2006.08.30
  • Published : 2007.03.10

Abstract

The contact problem for an elastic layer resting on an elastic half plane is considered according to the theory of elasticity with integral transformation technique. External loads P and Q are transmitted to the layer by means of two dissimilar rigid flat punches. Widths of punches are different and the thickness of the layer is h. All surfaces are frictionless and it is assumed that the layer is subjected to uniform vertical body force due to effect of gravity. The contact along the interface between elastic layer and half plane will be continuous, if the value of load factor, ${\lambda}$, is less than a critical value, ${\lambda}_{cr}$. However, if tensile tractions are not allowed on the interface, for ${\lambda}$ > ${\lambda}_{cr}$ the layer separates from the interface along a certain finite region. First the continuous contact problem is reduced to singular integral equations and solved numerically using appropriate Gauss-Chebyshev integration formulas. Initial separation loads, ${\lambda}_{cr}$, initial separation points, $x_{cr}$, are determined. Also the required distance between the punches to avoid any separation between the punches and the layer is studied and the limit distance between punches that ends interaction of punches, is investigated. Then discontinuous contact problem is formulated in terms of singular integral equations. The numerical results for initial and end points of the separation region, displacements of the region and the contact stress distribution along the interface between elastic layer and half plane is determined for various dimensionless quantities.

Keywords

References

  1. Adams, G.G. and Bogy, D.B. (1976), 'The plane solution for the elastic contact problem of a semi-infinite strip and half plane', J. Appl. Mech., 43, 603-607 https://doi.org/10.1115/1.3423940
  2. Artan, R. and Omurtag, M. (2000), 'Two plane punches on a nonlocal elastic half plane', Int. J. Engrg. Sci., 38, 395-403 https://doi.org/10.1016/S0020-7225(99)00053-1
  3. Birinci, A. and Erdol, R. (2001), 'Continuous and discontinuous contact problem for a layered composite resting on simple supports', Struet. Engrg. Mech., 12(1), 17-34
  4. Birinci, A. and Erdol, R. (2003), 'A frictionless contact problem for two elastic layers supported by a Winkler foundation', Struet. Engrg. Mech., 15(3), 331-344
  5. Cive1ek, M.B. and Erdogan, F. (1974), 'The axisymmetric double contact problem for a frictionless elastic layer', Int. J. Solids Struet., 10, 639-659 https://doi.org/10.1016/0020-7683(74)90048-1
  6. Cive1ek, M.B. and Erdogan, F. (1975), 'The frictionless contact problem for an elastic layer under gravity', J. Appl. Mech., 42(97), 136-140 https://doi.org/10.1115/1.3423504
  7. Civelek, M.B. and Erdogan, F. (1976), 'Interface separation in a frictionless contact problem for an elastic layer', J. Appl. Mech., 43(98), 175-177 https://doi.org/10.1115/1.3423775
  8. Civelek, M.B., Erdogan, F. and Cakiroglu, A.O. (1978), 'Interface separation for an elastic layer loaded by a rigid stamp', Int. J. Engrg. Sci., 16, 669-679 https://doi.org/10.1016/0020-7225(78)90044-7
  9. Comez, I., Birinci, A. and Erdol, R. (2004), 'Double receding contact problem for a rigid stamp and two elastic layers', European J Mech. A/Solids, 23, 301-309 https://doi.org/10.1016/j.euromechsol.2003.09.006
  10. Cakiroglu, A.O. and Cakiroglu, F.L. (1991), 'Continuous and discontinuous contact problems for strips on an elastic semi-infmite plane', Int. J. Engrg. Sci., 29(1), 99-111 https://doi.org/10.1016/0020-7225(91)90080-M
  11. Dhaliwal, R.S. (1970), 'Punch problem for an elastic layer overlying an elastic foundation', Int. J. Eng. Sci., 8, 273-288 https://doi.org/10.1016/0020-7225(70)90058-3
  12. Erdogan, F. and Gupta, G. (1972), 'On the numerical solutions of singular integral equations', Quart. J. Appl. Math., 29, 525-534 https://doi.org/10.1090/qam/408277
  13. Gecit, M.R. and Erdogan, F. (1978), 'Frictionless contact problem for an elastic layer under axisymmetric loading', Int. J. Solids Struet., 14, 771-785 https://doi.org/10.1016/0020-7683(78)90034-3
  14. Gecit, M.R. and Gokpmar, S. (1985), 'Frictionless contact between an elastic layer and a rigid rounded support', Arabian J. Sci. Eng, 10(3), 243-251
  15. Gecit, M.R. (1986), 'The axisymmetric double contact problem for a frictionless elastic layer indented by an elastic cylinder', Int. J. Eng Sci., 24(9), 1571-1584 https://doi.org/10.1016/0020-7225(86)90164-3
  16. Gladwell, G.M.L. (1976), 'On some unbonded contact problems in plane elasticity theory', J. Appl. Mech., 43, 263-267 https://doi.org/10.1115/1.3423821
  17. Keer, L.M., Dundurs, J. and Tsai, K.C. (1972), 'Problems involving a receding contact between a layer and a half space', J. Appl. Mech., 39, 1115-1120 https://doi.org/10.1115/1.3422839
  18. Klarbring, A., Mikelic, A. and Shillor, M. (1991), 'The rigid punch problem with friction', Int. J. Eng Sei., 29(6), 751-768 https://doi.org/10.1016/0020-7225(91)90104-B
  19. Lan, Q., Graham, G.A.C. and Selvadurai, A.P.S. (1996), 'Certain two punch problems for an elastic layer', Int. J. Solids Struet., 33(19), 2759-2774 https://doi.org/10.1016/0020-7683(95)00181-6
  20. Muskhelishvili, N.I. (1958), Singular Integral Equations. Noordhoff, Leyden, The Netherlands
  21. Jaffar, M.J. (1993), 'Determination of surface deformation of a bonded elastic layer indented by a rigid cylinder using the Chebyshev series method', 170, 291-294
  22. Jaffar, M.J. (2002), 'Frictionless contact between an elastic layer on a rigid base and a circular flat-ended punch with rounded edge or a conical punch with rounded tip', Int. J. Mech. Sci., 44, 545-560 https://doi.org/10.1016/S0020-7403(01)00104-7
  23. Porter, M.I. and Hills, D.A. (2002), 'Note on the complete contact between a flat rigid punch and an elastic layer attached to a dissimilar substrate', Int. J. Mech. Sci., 44, 509-520 https://doi.org/10.1016/S0020-7403(01)00106-0
  24. Shanahan, M.E.R. (2000), 'Adhesion of a punch to a thin membrane', C.R. Acad. Sci. Paris, Surfaces, Interfaces, Films, 1(4), 517-522

Cited by

  1. Contact Problem for an Elastic Layer on an Elastic Half Plane Loaded by Means of Three Rigid Flat Punches vol.2013, 2013, https://doi.org/10.1155/2013/137427
  2. Continuous contact problem for two elastic layers resting on an elastic half-infinite plane vol.9, pp.1, 2014, https://doi.org/10.2140/jomms.2014.9.105
  3. Analytical solution to continuous contact problem for a functionally graded layer loaded through two dissimilar rigid punches vol.53, pp.14, 2018, https://doi.org/10.1007/s11012-018-0902-7
  4. Using multiple point constraints in finite element analysis of two dimensional contact problems vol.36, pp.1, 2010, https://doi.org/10.12989/sem.2010.36.1.095
  5. Frictionless Contact Problem for a Functionally Graded Layer Loaded Through Two Rigid Punches Using Finite Element Method vol.35, pp.5, 2019, https://doi.org/10.1017/jmech.2018.55
  6. Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane vol.72, pp.6, 2007, https://doi.org/10.12989/sem.2019.72.6.775
  7. Continuous and discontinuous contact problems of a homogeneous piezoelectric layer pressed by a conducting rigid flat punch vol.231, pp.3, 2020, https://doi.org/10.1007/s00707-019-02551-3
  8. Examination of analytical and finite element solutions regarding contact of a functionally graded layer vol.76, pp.3, 2007, https://doi.org/10.12989/sem.2020.76.3.325
  9. Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM vol.27, pp.3, 2007, https://doi.org/10.12989/cac.2021.27.3.199
  10. Examination of contact problem between functionally graded punch and functionally graded layer resting on elastic plane vol.78, pp.2, 2021, https://doi.org/10.12989/sem.2021.78.2.135