Structural Engineering and Mechanics

  • 제25권2호
  • /
  • Pages.161-180
  • /
  • 2007
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A DQ nonlinear bending analysis of skew composite thin plates

  • Malekzadeh, P. (Department of Mechanical Engineering, School of Engineering, Persian Gulf University, Center of Excellence for Computational Mechanics in Mechanical Engineering, Shiraz University)
  • 투고 : 2005.11.22
  • 심사 : 2006.08.18
  • 발행 : 2007.01.30
⟨ 이전 논문 다음 논문 ⟩

초록

A first endeavor is made to exploit the differential quadrature method (DQM) as a simple, accurate, and computationally efficient numerical tool for the large deformation analysis of thin laminated composite skew plates, which has very strong singularity at the obtuse vertex. The geometrical nonlinearity is modeled by using Green's strain and von Karman assumption. A recently developed DQ methodology is used to exactly implement the multiple boundary conditions at the edges of skew plates, which is a major draw back of conventional DQM. Using oblique coordinate system and the DQ methodology, a mapping-DQ discretization rule is developed to simultaneously transform and discretize the equilibrium equations and the related boundary conditions. The effects of skew angle, aspect ratio and different types of boundary conditions on the convergence and accuracy of the presented method are studied. Comparing the results with the available results from other numerical or analytical methods, it is shown that accurate results are obtained even when using only small number of grid points. Finally, numerical results for large deflection behavior of antisymmetric cross ply skew plates with different geometrical parameters and boundary conditions are presented.

키워드

참고문헌

  1. Alwar, R.S. and Ramachandra Rao, N. (1973), 'Nonlinear analysis of orthotropic skew plates', AIAA J., 11, 495-498 https://doi.org/10.2514/3.6777
  2. Alwar, R.S. and Ramachandra Rao, N. (1974), 'Large elastic defonnations of clamped skewed plates by dynamic relaxation', Comput. Struct., 4, 381-398 https://doi.org/10.1016/0045-7949(74)90065-0
  3. Bert, C.W and Malik, M. (1996), 'Differential quadrature method in computational mechanics: A review', Appl. Mech. Rev., 49, 1-27 https://doi.org/10.1115/1.3101882
  4. Bert, C.W, Jang, S.K. and Striz, A.G (1988), 'Two new approximate methods for analyzing free vibration of structural components', AIAA J., 26, 612-618 https://doi.org/10.2514/3.9941
  5. Bert, C.W, Jang, S.K. and Striz, A.G (1989), 'Nonlinear bending analysis of orthotropic rectangular plates by the method of differential quadrature', Compo Mech., 5, 217-226 https://doi.org/10.1007/BF01046487
  6. Buragohain, D.N. and Patodi, S.C. (1978), 'Large deflection analysis of skew plates by lumped triangular element fonnulation', Comput. Struct., 9, 183-189 https://doi.org/10.1016/0045-7949(78)90137-2
  7. Chen, W, Shu, C., He, W and Zhong, T. (2000), 'The application of special matrix product to didifferential quadrature solution of geometrically nonlinear bending of orthotropic rectangular plates', Comput. Struct., 74, 65-76 https://doi.org/10.1016/S0045-7949(98)00320-4
  8. Duan, M. and Mahendran, M. (2003), 'Large deflection analysis of skew plates using hybrid/mixed finite element method', Comput. Struct., 81, 1415-1424 https://doi.org/10.1016/S0045-7949(03)00055-5
  9. Iyengar, K.T.S. and Srinivasan, RS. (1968), 'Reply to discussion by Kennedy on clamped skew plate under unifonn nonnalloading', J. Royal Aeronautical Socie., April, 340
  10. Karami, G and Malekzadeh, P. (2002), 'A new differential quadrature methodology for beam analysis and the associated DQEM', Comput. Meth. Appl. Mech. Eng., 191,3509-3526 https://doi.org/10.1016/S0045-7825(02)00289-X
  11. Karami, G and Malekzadeh, P. (2002), 'Static and stability analysis of arbitrary straight-sided quadrilateral thin plates by DQM', Int. J. Solids Struct., 39, 4927-4947 https://doi.org/10.1016/S0020-7683(02)00403-1
  12. Karami, G and Malekzadeh, P. (2003), 'An efficient differential quadrature methodology for free vibration analysis of arbitrary straight-sided quadrilateral thin plates', J. Sound Vib., 263, 415-442 https://doi.org/10.1016/S0022-460X(02)01062-3
  13. Karami, G and Malekzadeh, P. (2003), 'Application of a new differential quadrature methodology for free vibration analysis of plates', Int. J. Num. Meth. Eng., 56, 847-867 https://doi.org/10.1002/nme.590
  14. Karami, G and Malekzadeh, P. (2004), 'In plane free vibration analysis of circular arches with varying cross sections', J. Sound Vib., 274, 777-799 https://doi.org/10.1016/S0022-460X(03)00786-7
  15. Karami, G, Shahpari, SA and Malekzadeh, P. (2003), 'DQM analysis of skewed and trapezoidal laminated plates', Compos. Struct., 59, 391-400
  16. Kennedy, J.B. and Simon, N.G (1967), 'Linear and nonlinear analysis of skewed plates', J. Appl. Mech. Trans. ASME, 34, 271-277 https://doi.org/10.1115/1.3607678
  17. Li, J.J. and Cheng, C.J. (2005), 'Differential quadrature method for nonlinear free vibration of orthotropic plates with finite defonnation and transverse shear effect', J. Sound Vib., 281, 295-309 https://doi.org/10.1016/j.jsv.2004.01.016
  18. Lin, RM., Lim, K.M. and Du, H. (1994), 'Large defonnation analysis of plates under thennalloading', Comput. Meth. Appl. Mech. Eng., 117, 381-390 https://doi.org/10.1016/0045-7825(94)90124-4
  19. Malekzadeh, P. and Karami, G (2003), 'Out-of-plane static analysis of circular arches by DQM', Int. J. Solids Struct., 40, 6527-6545 https://doi.org/10.1016/S0020-7683(03)00412-8
  20. Malekzadeh, P. and Karami, G (2005), 'Polynomial and harmonic differential quadrature methods for free vibration of variable thickness thick skew plates', Eng. Struct., 27, 1563-1574 https://doi.org/10.1016/j.engstruct.2005.03.017
  21. Pica, A., Wood, RD. and Hinton, E. (1980), 'Finite element analysis of geometrically nonlinear plate behavior using a Mindlin formulation', Comput. Struct., 11,203-215 https://doi.org/10.1016/0045-7949(80)90160-1
  22. Ray, A.K., Banerjee, B. and Bhattacharjee, B. (1992), 'Large deflections of rhombic plates-a new approach', Int. J. Non-Linear Mech., 27, 1015-1024 https://doi.org/10.1016/0020-7462(92)90052-9
  23. Reddy, J.N. (1997), Mechanics of Laminated Composite Plates Theory and Analysis, CRC, Boca Raton
  24. Srinivasan, R.S. and Boby, W. (1976), 'Nonlinear analysis of skew plates using the finite element method', Comput. Struct., 6, 199-202 https://doi.org/10.1016/0045-7949(76)90030-4
  25. Srinivasan, RS. and Ramachandran, S.V (1975), 'Large deflection of skew plates with variable thickness', AIAA J., 13, 843-844 https://doi.org/10.2514/3.60455
  26. Srinivasan, R.S. and Ramachandran, S.V. (1976), 'Nonlinear analysis of clamped skew plates', Compo Meth. Appl. Mech. Eng., 7,219-233 https://doi.org/10.1016/0045-7825(76)90014-1
  27. Striz, A.G, Jang, S.K. and Bert, C.W. (1988), 'Nonlinear bending analysis of thin circular by differential quadrature', Thin-Walled Struct., 6, 51-62 https://doi.org/10.1016/0263-8231(88)90025-0

피인용 문헌

  1. Analysis and prediction of ultimate strength of high-strength SFRC plates under in-plane and transverse loads vol.52, pp.6, 2014, https://doi.org/10.12989/sem.2014.52.6.1273
  2. Large deflection analysis of point supported super-elliptical plates vol.51, pp.2, 2014, https://doi.org/10.12989/sem.2014.51.2.333
  3. Behavior of high-strength fiber reinforced concrete plates under in-plane and transverse loads vol.31, pp.4, 2009, https://doi.org/10.12989/sem.2009.31.4.371