Corrosion of Selected Materials in Boiling Sulfuric Acid for the Nuclear Power Industries

  • Kim, Dong-Jin (Nuclear Material Technology Development Division, Korea Atomic Energy Research Institute(KAERI)) ;
  • Lee, Han Hee (Nuclear Material Technology Development Division, Korea Atomic Energy Research Institute(KAERI)) ;
  • Kwon, Hyuk Chul (Nuclear Material Technology Development Division, Korea Atomic Energy Research Institute(KAERI)) ;
  • Kim, Hong Pyo (Nuclear Material Technology Development Division, Korea Atomic Energy Research Institute(KAERI)) ;
  • Hwang, Seong Sik (Nuclear Material Technology Development Division, Korea Atomic Energy Research Institute(KAERI))
  • Published : 2007.04.01

Abstract

Iodine sulfur (IS) process is one of the promising processes for a hydrogen production by using a high temperature heat generated by a very high temperature gas cooled reactor(VHTR) in the nuclear power industries. Even though the IS process is very efficient for a hydrogen production and it is not accompanied by a carbon dioxide evolution, the highly corrosive environment of the process limits its application in the industry. Corrosion tests of selected materials were performed in sulfuric acid to select appropriate materials compatible with the IS process. The materials used in this work were Fe-Cr alloys, Fe-Ni-Cr alloys, Fe-Si alloys, Ni base alloys, Ta, Ti, Zr, SiC, Fe-Si, etc. The test environments were 50 wt% sulfuric acid at $120^{\circ}C$ and 98 wt% at $320^{\circ}C$. Corrosion rates were measured by using a weight change after an immersion. The surface morphologies and cross sectional areas of the corroded materials were examined by using SEM equipped with EDS. Corrosion behaviors of the materials were discussed in terms of the chemical composition of the materials, a weight loss, the corrosion morphology, the precipitates in the microstructure and the surface layer composition.

Keywords

References

  1. H. Ota, 13th International Conference on Nuclear Engineering, p. 1, Beijing (2005)
  2. JAERI report, 94-006
  3. Hiroaki Tsuchia, Electrochimica Acta, 47, 4357 (2002)
  4. G. Lu and G. Zangari, Electrochimica Acta, 47, 2969 (2002)