한국초전도ㆍ저온공학회논문지 (Progress in Superconductivity and Cryogenics)

  • 제9권1호
  • /
  • Pages.14-17
  • /
  • 2007
  • /
  • 1229-3008(pISSN)
  • /
  • 2287-6251(eISSN)
한국초전도저온학회 (The Korean Society of Superconductivity and Cryogenics)
권호 표지
DOI QR코드

DOI QR Code

연속 슬롯-다이 코팅 및 하소공정을 이용한 MOD-YBCO 초전도 선재 제조

Continuous Slot-die coating & Calcination process for long length MOD-YBCO coated conductors

  • 정국채 (한국기계연구원 신기능재료연구본부) ;
  • 유재무 (한국기계연구원 신기능재료연구본부) ;
  • 고재웅 (한국기계연구원 신기능재료연구본부) ;
  • 김영국 (한국기계연구원 신기능재료연구본부)
  • 발행 : 2007.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The slot-die coating & calcination process was adopted to fabricate the long YBCO precursor films on the buffered metal tape for the $2^{nd}$ generation coated conductors. To obtain the smooth and crack-free surface of long YBCO precursor films, the parameters of slot-die coating and the process variables of calcination step must be optimized simultaneously in reel-to-reel method. Among the parameter of slot-die coating process, the viscosities of the precursor solution was controlled from 60cP to 200cP to obtain the thicker films from on single coating. The slot-die gap, the injection rate of precursor solution, the moving speed of buffered metal tape etc. are controlled lot the full coverage and smooth surface of YBCO precursor films. The slot-die coated films are moved through the tube furnace with predetermined heating profiles in humid oxygen ambient The YBCO precursor films was identifed with $Y_2O_3,\;BaF_2$, and CuO phase by XRD and consisted of fine grains of about 20nm size observed by FE-SEM. The YBCO films show the critical current density over $MA/cm^2$ using the precursor films formed by the continuous slot-die coating & calcination process.

키워드

참고문헌

  1. Y. Aoki et al, "Fabrication of 10-m class Y-123 coated conductors using continuous reel-to-reel process by TFA-MOD method," Physica C 426-431, 945-948, 2005 https://doi.org/10.1016/j.physc.2005.03.076
  2. R. Teranishi et al, "High-Ic processing for YBCO coated conductors by TFA-MOD process," Physica C 426-431, 959-965, 2005 https://doi.org/10.1016/j.physc.2005.02.087
  3. H. Fuji, T. Honjo, Y. Nakamura, T. Izumi, Y. Shiohara, R. Teranishi,k M. Yoshimura, Y. Iijima, T. Saitoh, "Fabrication processing of Y123 coated conductors by MOD-TFA method," Physica C 378-381, 1013, 2002 https://doi.org/10.1016/S0921-4534(02)01564-2
  4. M. W. Rupich et al, "The Development of Second Generation HTS Wire at American Superconductor," Applied Superconductivity Conference 2006, Seattle, August 27, 2006
  5. R. Teranishi, T. Izumi, and Y. Shiohara, "Highlights of coated conductor development in Japan," Supercond. Sci. Technol. 19 S4-S12, 2006 https://doi.org/10.1088/0953-2048/19/3/002
  6. H. Fuji et al, "Processing for long YBCO coated conductors by advanced TFA-MOD process," Physica C 412-414, 916-919, 2004 https://doi.org/10.1016/j.physc.2004.02.206
  7. H. Fuji et al, "Progress on TFA-MOD coated conductor development," Physica C, 426-431, 938-944, 2005 https://doi.org/10.1016/j.physc.2005.02.153
  8. J. H. Su, P. P. Joshi, V. Chintamaneni, and S. M. Mukhopadhyay, "The influence of the heating rate on YBCO films prepared by the trifluoroacetate metal-organic deposition process," Supercond. Sci. Technol. 18. 1496-1501, 2005 https://doi.org/10.1088/0953-2048/18/11/015