DOI QR코드

DOI QR Code

Crevice Corrosion Behavior by Measuring the Potential Inside the Crevice and Repassivation Characteristics of Alloy 600 and Alloy 690

틈 내 전위측정을 통한 Alloy 600 및 Alloy 690의 틈부식 거동과 재부동태 특성

  • Oh, Se-Jung (School of Advanced Materials Engineering, Kookmin University) ;
  • Lee, Jae-Bong (School of Advanced Materials Engineering, Kookmin University)
  • 오세정 (국민대학교 공과대학 신소재공학부) ;
  • 이재봉 (국민대학교 공과대학 신소재공학부)
  • Published : 2007.04.30

Abstract

Crevice corrosion is the accelerated attack occurred in the occluded cell under a crevice on the metal surface. Crevice corrosion behaviors of nickel-based alloys such as Alloy 600 and Alloy 690 were investigated in acidic solution with different chloride ion concentrations. Tests were carried out using the specially designed crevice cell with a very narrow Luggin capillary assembly to measure the potential inside the crevice. It is believed that crevice corrosion in active/passive system like nickel-based alloys has much to do with the properties of passive film and its repassivation characteristics, investigated by the capacitance measurement and by the abrading electrode technique, respectively. An attempt was made to elucidate the relationship between crevice corrosion behaviors, properties of passive film and its repassivation kinetics. Results showed that repassivation rate parameter $n1{\leq}0.6$ and/or $n2{\leq}0.5$ indicated the possible occurrence of crevice corrosion.

Keywords

References

  1. M. I. Abdulsalam, Corrosion Sci., 47 (2005) 1336 https://doi.org/10.1016/j.corsci.2004.08.001
  2. K. Cho, H. W. Pickering, J. Electrochem. Soc., 138 (1991) L56 https://doi.org/10.1149/1.2085386
  3. M. I. Abdulsalam, H. W. Pickering, Corrosion Sci., 41 (1999) 351 https://doi.org/10.1016/S0010-938X(98)00103-6
  4. M. K. Sawford, B. G. Ateya, A. M. Abdullah, H. W. Pickering, J. Electrochem. Soc., 149 (2002) B198
  5. M. Vankeerberghn, M. I. Abdulsalam, H. W. Pickering, J. Deconinck, J. Electrochem. Soc., 150 (2003) B445 https://doi.org/10.1149/1.1598963
  6. E. A. Nystrom, J. B. Lee, A. A. Sagues, H. W. Pickering, J. Electrochem. Soc., 142 (1994) 358
  7. S.-J. Oh, J.-B. Lee, ISE 56th Annuai Meeting, 4B-012-O, Busan, Korea (2005) 674
  8. J.-B. Lee, S.-J. Oh, 16th International Corrosion Congress, 09-09, Beijing, China (2005)
  9. J.-B. Lee, Materials Chemistry and Physics, 99 (2006) 224 https://doi.org/10.1016/j.matchemphys.2005.10.016
  10. S. R. Morrison, Electrochemistry at Semiconductors and Oxidized Metal Electrodes, Plenum Press, New york (1980) 120
  11. N. Sato, M. Cohen, J. Electrochem. Soc., 111 (1964) 512 https://doi.org/10.1149/1.2426170
  12. Z. Szklarska-Smialowska, W. Kozlowski, J. Electrochern. Soc., 131 (1984) 234 https://doi.org/10.1149/1.2115555
  13. J. W. Schultze, M. M. Lohrengel, D. Ross, Electrochim. Acta, 28 (1983) 973 https://doi.org/10.1016/0013-4686(83)85175-5
  14. M. Da Cunha Belo, B. Rondot, C. Compere, M. F. Montemor, A. M. P. Simoes, M. G. S. Ferreira, Corros. Sci., 40 (1998) 481 https://doi.org/10.1016/S0010-938X(98)00016-X
  15. Q. Le Xuan, B. Rondot, M. Da Cunha Belo, Ann. Chim. Sci. Mat., 23 (1998) 607 https://doi.org/10.1016/S0151-9107(98)80115-3
  16. N. E. Hakiki, M. F. Montemor, M. G. S. Ferreira, M. Da Cunha Belo, Corros. Sci., 42 (2000) 687 https://doi.org/10.1016/S0010-938X(99)00082-7
  17. M. J. Carmeaim, A. M. Simoes, M. F. Montemor, M. Da Cunha Bela, Corros. Sci., 47, (2005) 581 https://doi.org/10.1016/j.corsci.2004.07.002
  18. N. E. Hakiki, S. Boudin, B. Rondot, M. Da Cunha Belo, Corros. Sci., 37, (1995) 1809 https://doi.org/10.1016/0010-938X(95)00084-W
  19. V. L'Hostis a, C. Dagbert, D. Feron, Electrochim. Acta, 48 (2003) 1451 https://doi.org/10.1016/S0013-4686(03)00023-9
  20. L. Hamadou, A. Kadri, N. Benbrahim, Applied Surface Science, 252 (2005) 1510 https://doi.org/10.1016/j.apsusc.2005.02.135
  21. M. G. S. Ferreira, N. E. Hakiki, G. Goodlet, S. Faty, A. M. P. Simoes, M. Da Cunha Belo, Electrochi. Acta, 46 (2001) 3767 https://doi.org/10.1016/S0013-4686(01)00658-2