International Journal of Control, Automation, and Systems

  • 제5권3호
  • /
  • Pages.283-294
  • /
  • 2007
  • /
  • 1598-6446(pISSN)
  • /
  • 2005-4092(eISSN)
제어로봇시스템학회 (Institute of Control, Robotics and Systems)
권호 표지

Two-Wheeled Welding Mobile Robot for Tracking a Smooth Curved Welding Path Using Adaptive Sliding-Mode Control Technique

  • 발행 : 2007.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a nonlinear controller based on adaptive sliding-mode method which has a sliding surface vector including new boundizing function is proposed and applied to a two-wheeled welding mobile robot (WMR). This controller makes the welding point of WMR achieve tracking a reference point which is moving on a smooth curved welding path with a desired constant velocity. The mobile robot is considered in view of a kinematic model and a dynamic model in Cartesian coordinates. The proposed controller can overcome uncertainties and external disturbances by adaptive sliding-mode technique. To design the controller, the tracking error vector is defined, and then the sliding surface vector including new boundizing function and the adaptation laws are chosen to guarantee that the error vector converges to zero asymptotically. The stability of the dynamic system is shown through the Lyapunov method. In addition, a simple way of measuring the errors by potentiometers is introduced. The simulations and experimental results are shown to prove the effectiveness of the proposed controller.

키워드

참고문헌

  1. M. Y. Kim, K. W. Ko, H. S. Cho, and J. H. Kim, 'Visual sensing and recognition of welding environment for intelligent shipyard welding robots,' Proc. of IEEE Intelligent Robots and Systems, vol. 3, pp. 2159-2165, 2000
  2. Y. B. Jeon, S. S. Park, and S. B. Kim, 'Modeling and motion control of mobile robot for lattice type of welding,' KSME International Journal, vol. 16, No.1, pp. 83-93, 2002 https://doi.org/10.1007/BF03185158
  3. B. O. Kam, Y. B. Jeon, and S. B. Kim, 'Motion control of two-wheeled welding mobile robot with seam tracking sensor,' Proc. of IEEE Industrial Electronics, vol. 2, pp. 851-856, 2001
  4. T. L. Chung, H. T. Bui, T. T. Nguyen, and S. B. Kim, 'Sliding mode control of two-wheeled welding mobile robot for tracking smooth curved welding path,' KSME International Journal, vol. 18, no. 7, pp. 1094-1106, 2004
  5. J. M. Yang and J. H. Kim, 'Sliding mode control for trajectory tracking of nonholonomic wheeled mobile robots,' IEEE Trans. on Robotics and Automation, vol. 15, no. 3, pp. 578-587, 1999 https://doi.org/10.1109/70.768190
  6. T. H. Bui, T. L. Chung, T. T. Nguyen, and S. B. Kim, 'A simple nonlinear control of a twowheeled welding mobile robot,' International Journal of Control, Automation, and System, vol. 1, no. 1, pp. 35-42, 2003
  7. D. K. Chwa, J. H. Sea, P. J. Kim, and J. Y. Choi, 'Sliding mode tracking control of nonholonomic wheeled mobile robots,' Proc. of the American Control Conference, pp. 3991-3996, 2002
  8. X. Yun and Y. Yamamoto, 'Internal dynamics of a wheeled mobile robot,' Proc. of IEEE Intelligent Robots and Systems, pp. 1288-1294, 1993
  9. T. Fukao, H. Nakagawa, and N. Adachi, 'Adaptive tracking control of a nonholonomic mobile robot,' IEEE Trans. on Robotics and Automation, vol. 16, no. 5, pp. 609-615, 2000 https://doi.org/10.1109/70.880812
  10. T. C. Lee, C. H. Lee, and C. C. Teng, 'Adaptive tracking control of nonholonomic mobile robot by computed torque', Proc. of IEEE Decision and Control, pp. 1254-1259, 1999
  11. Y. Kanayama, Y. Kimura, F. Miyazaki, and T. Noguchi, 'A stable tracking control method for a nonholonomic mobile robot,' Proc. of IEEE Intelligent Robots and Systems Workshop, Japan, Vol. 3, pp. 1236-1241, 1991
  12. J. J. E. Slotine and W. Li, Applied Nonlinear Control, Prentice-Hall International, Inc., pp. 122-125,1991