Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Load Modeling of Electric Locomotive Using Parameter Identification

  • Kim, Joo-Rak (Signaling & Electrical Engineering Research Dept., Korea Railroad Research Institute) ;
  • Shim, Keon-Bo (Dept. of Electrical and Electronic Engineering, Hongik University) ;
  • Kim, Jung-Hoon (Dept. of Electrical and Electronic Engineering, Hongik University)
  • Published : 2007.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Electric load components have different characteristics according to the variation of voltage and frequency. This paper presents the load modeling of an electric locomotive by the parameter identification method. The proposed method for load modeling is very simple and easy for application. The proposed load model of the electric locomotive is represented by the combination of the loads that have static and dynamic characteristics. This load modeling is applied to the KTX in Korea to verify the effectiveness of the proposed method. The results of proposed load modeling by the parameter identification follow the field measurements very exactly.

Keywords

References

  1. EPRI, 'Determining Load Characteristics for Transient Performances', EPRI Report EL 849 prepared by U.T.A, G.E. and IREQ, 1979
  2. Ma Da-Qing, Ju Ping, 'A Novel Approach to Dynamic Load Modeling', IEEE PES Summer Meeting 1988, Paper 88SM647-4, 1988
  3. R. Hooke, T. A. Jeeves, 'Direct Search Solution of Numerical and Statistical Problems', Journal Assoc. Comp. Mach., Vol. 8, pp 212-229, 1994
  4. L. Ljung, T. Soderstrom, 'Theory and Practice of Recursive Identification', MIT Press, 1987
  5. Steven R. Shaw & Steven B. Leeb, 'Identification of Induction Motor Parameters from Transient Stator Current Measurement', IEEE Transaction on Industrial Electronics, Vol. 46, No. 1, 139-149, 1999 https://doi.org/10.1109/41.744405
  6. Amuliu Bogdan Proca & Ali Keyhani, 'Identification of Variable Frequency Induction Motor Models from Operating Data', IEEE Transaction on Energy Conversion, Vol. 17, No. 1, 24-31, 2002 https://doi.org/10.1109/60.986433
  7. T. Lehtla, J. Joller & J. Laugis, Parameter Identification and Comparison of an Induction Motor Models, Power Electronics and Variable Speed Drives Conference, 201-205, 2000

Cited by

  1. A Phase-shifter for Regulating Circulating Power Flow in a Parallel-feeding AC Traction Power System vol.9, pp.4, 2014, https://doi.org/10.5370/JEET.2014.9.4.1137
  2. Kalman-Filter Based Static Load Modeling of Real Power System Using K-EMS Data vol.7, pp.3, 2012, https://doi.org/10.5370/JEET.2012.7.3.304
  3. EMS-Data-Based Load Modeling to Evaluate the Effect of Conservation Voltage Reduction at a National Level vol.6, pp.12, 2013, https://doi.org/10.3390/en6083692
  4. Robust state estimator design for a solar battery charging system vol.96, pp.3, 2009, https://doi.org/10.1080/00207210802524278