DOI QR코드

DOI QR Code

Wind-and-flip technique for the fabrication of a persistent mode superconductive magnet by using a coated conductor

  • Published : 2007.05.31

Abstract

Persistent mode HTS pancake coil has been fabricated using a coated conductor by a "wind-and-flip" method. A coated conductor with the length of 1.2 meters was divided at the center along the length. The sliced coated conductor was wound on a pair of bobbins with a diameter of around 4 cm and two pancake coils connected superconductively without a resistive joint were prepared. By flipping one of the pancake coils, the magnetic field generated by each coil is to be aligned to the same direction and generate meaningful magnetic field while the magnetic fields of two spit coils are canceled without flipping. Permanent current was induced by flowing current to the coil immersed in liquid nitrogen pool using a power supply. A magnetic field of 48.8 Gauss was generated when 20 A of current was flowing in the pancake coils. The "Wind and flip" method can be applied for the fabrication of a long solenoid magnet by winding a sliced coated conductor on a cylindrical bobbin. It is also introduced that the construction of multiple sets of pancake (or solenoid) coils is possible by a "wind-and-flip" method using a wide coated conductor.

Keywords

References

  1. H. G. Lee, G. W. Hong, J. J. Kim, M. Y. Song, 'A study on joining Ag/BSCCO superconducting tapes,' Physica C 242 (1995) 81 https://doi.org/10.1016/0921-4534(94)02386-7
  2. H. G. Lee, I. H. Kuk, G. W. Hong, E. A. Kim, K. S. No, W. Goldacker, 'Filament-to-filament joining of multi-filamentary Ag/Bi-2223 superconducting tapes,' Physica C 259 (1996) 69 https://doi.org/10.1016/0921-4534(96)00043-3
  3. J. Y. Kato, N. Sakai, S. Tajima, S. Miyata, M. Konishi, Y. Yamada, N. Chikumoto, K. Nakao, T. Izumi, Y. Shiohara, 'Diffusion joint of YBCO coated conductors using stabilizing silver layers,' Physica C 445-448(2006) 686-688 https://doi.org/10.1016/j.physc.2006.05.005
  4. C. Gu , C. Zhuang, T. M. Qu, Z. Han, 'Voltage-current property of two HTS tapes connected by ordinary Sn-Pb solder,' Physica C 426-431 (2005) 1385-1389 https://doi.org/10.1016/j.physc.2005.03.073
  5. H. G. Lee, J. G. Kim, S. W. Lee, W. S. Kim, S. W. Lee, K. D. Choi, G. W. Hong and T. K. Ko, 'Design and fabrication of permanent mode magnet by using coated conductor,' Physica C 445-448 (2006) 1099-1102 https://doi.org/10.1016/j.physc.2006.05.044
  6. V. Selvamanickam, presented at DOE peer review, Washington, (2004), (2005), (2006)
  7. G. A. Levin, P. N. Barnes, 'The Integration of YBCO Coated Conductors into Magnets and Rotating Machinery,' presented at 2005 Cryog. Eng. Conf. and Int. Cryog. Mat. Conf. Keystone, CO (2005)
  8. A. Malezemoff, presented at DOE peer review, Washington, (2004), (2005), (2006)