한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제44권4호
  • /
  • Pages.189-193
  • /
  • 2007
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지
DOI QR코드

DOI QR Code

Effect of Additive Composition on Fracture Toughness of In Situ-Toughened SiC−Si3N4 Composites

  • Lee, Young-Il (Department of Materials Science and Engineering, The University of Seoul) ;
  • Kim, Young-Wook (Department of Optometry and Vision Science, Dongnam Health College)
  • 발행 : 2007.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Effect of additive composition on fracture toughness of in situ-toughened $SiC-Si_3N_4$ composites was investigated for five different additive compositions. The highest toughness $(6.4MPa{\cdot}m^{1/2})\;in\;SiC-Si_3N_4$ composites investigated herein was obtained when an Y-Mg-Si-Al-O-N oxynitride glass was used as a sintering additive. The improvement in fracture toughness was produced by enhanced bridging and deflection by $Si_3N_4$ grains.

키워드

참고문헌

  1. P. F. Becher, 'Recent Advances in Microstructural Tailoring of Silicon Nitride Ceramics and the Effects on Thermal Conductivity and Fracture Properties,' J. Kor. Ceram. Soc., 42 [8] 525-31 (2005) https://doi.org/10.4191/KCERS.2005.42.8.525
  2. J. H. Kim, Y. G. Kim, and D. K. Kim, 'Characterization of Subsurface Damage in $Si_3N_4$ Ceramics with Static and Dynamic Indentation,' J. Kor. Ceram. Soc., 42 [8] 537-41 (2005) https://doi.org/10.4191/KCERS.2005.42.8.537
  3. Y. S. Chun and Y.-W. Kim, 'Possible Strategies for Micro- Structure Control of Liquid-Phase-Sintered Silicon Carbide Ceramics,' J. Kor. Ceram. Soc., 42 [8] 542-47 (2005) https://doi.org/10.4191/KCERS.2005.42.8.542
  4. Y.-W. Kim, S. H. Lee, T. Nishimura, and M. Mitomo, 'Heat- Resistant Silicon Carbide with Aluminum Nitride and Scandium Oxide,' Acta Mater., 53 4701-08 (2005) https://doi.org/10.1016/j.actamat.2005.07.002
  5. D. Shaoming, J. Dongliang, T. Shouhong, and G. Jingkun, 'Hot Isostatic Pressing of $SiC/Si_3N_4$ Composite with Rare Earth Oxide Additions,' Ceram. Int., 21 451-55 (1995) https://doi.org/10.1016/0272-8842(95)94473-N
  6. S. Turan and K. M. Knowles, $\alpha\rightarrow\beta$ Reverse Phase Transformation in Silicon Carbide in Silicon Nitride-Particulate- Reinforced Silicon Carbide Composites,' J. Am. Ceram. Soc., 79 [11] 2892-96 (1996) https://doi.org/10.1111/j.1151-2916.1996.tb08723.x
  7. Y.-W. Kim and M. Mitomo, 'Fabrication and Mechanical Properties of Silicon Carbide-Silicon Nitride Nanocomposites,' J. Mater. Sci., 35 5885-90 (2000) https://doi.org/10.1023/A:1026785114133
  8. J. Y. Kim, Y.-W. Kim, and J. G. Lee, 'Effect of Grain Boundary Composition on Microstructure and Mechanical Properties of Silicon Carbide (in Korean),' J. Kor. Ceram. Soc., 35 [9] 911-16 (1998)
  9. S. H. Lee and Y.-W. Kim, 'Effect of Additive Composition on Mechanical Properties of Silicon Carbide Sintered with Aluminum Nitride and Erbium Oxide,' J. Kor. Ceram. Soc., 42 [1] 16-21 (2005) https://doi.org/10.4191/KCERS.2005.42.1.016
  10. Y.-W. Kim, Y. S. Chun, T. Nishimura, M. Mitomo, and Y. H. Lee, 'High-Temperature Strength of Silicon Carbide Ceramics Sintered with Rare-Earth Oxide and Aluminum Nitride,' Acta Mater., 55 727-36 (2007) https://doi.org/10.1016/j.actamat.2006.08.059
  11. Y.-W. Kim, Y. I. Lee, M. Mitomo, H. J. Choi, and J. G. Lee, 'Fabrication and Mechanical Properties of Silicon Carbide- Silicon Nitride Composites with Oxynitride Glass,' J. Am. Ceram. Soc. 82 [4] 1058-60 (1999) https://doi.org/10.1111/j.1151-2916.1999.tb01873.x
  12. Y. I. Lee, Y.-W. Kim, H. J. Choi, and J. G. Lee, 'Effects of Additive Amount on Microstructure and Mechanical Properties of Silicon Carbide-Silicon Nitride Composites,' J. Mater. Sci., 36 699-702 (2001) https://doi.org/10.1023/A:1004888908901
  13. T. Rouxel and P. Verdier, 'SiC Particle Reinforced Oxynitride Glass and Glass-Ceramic Composites: Crystallization and Viscoplastic Forming Ranges,' Acta Mater., 44 [6] 2217-25 (1996) https://doi.org/10.1016/1359-6454(95)00367-3
  14. B. Baron, T. Chartier, T. Rouxel, P. Verdier, and Y. Laurent, 'SiC Particle Reinforced Oxynitride Glass: Processing and Mechanical Properties,' J. Eur. Ceram. Soc., 17 773-80 (1997) https://doi.org/10.1016/S0955-2219(96)00165-3
  15. S. G. Lee, Y.-W. Kim, and M. Mitomo, 'Relationship between Microstructure and Fracture Toughness of Toughened Silicon Carbide Ceramics,' J. Am. Ceram. Soc., 84 [6] 1347-53 (2001) https://doi.org/10.1111/j.1151-2916.2001.tb00840.x
  16. Y.-W. Kim and M. Mitomo, 'Fine-Grained Silicon Carbide Ceramics with Oxynitride Glass,' J. Am. Ceram. Soc., 82 [10] 2731-36 (1999) https://doi.org/10.1111/j.1151-2916.1999.tb02149.x
  17. Y.-W. Kim, M. Mitomo, and G. D. Zhan, 'Mechanism of Grain Growth in Liquid-Phase-Sintered $\beta$-SiC,' J. Mater. Res., 14 [11] 4291-93 (1999) https://doi.org/10.1557/JMR.1999.0581
  18. J. Y. Kim, Y.-W. Kim, M. Mitomo, G. D. Zhan, and J. G. Lee, 'Microstructure and Mechanical Properties of a-Silicon Carbide Sintered with Yttrium-Aluminum Garnet and Silica,' J. Am. Ceram. Soc., 82 [2] 441-44 (1999) https://doi.org/10.1111/j.1551-2916.1999.tb20082.x
  19. M. Mitomo, R. J. Xie, and N. Hirosaki, 'Materials Development in $\alpha$-Sialon Ceramics,' J. Kor. Ceram. Soc., 43 [8] 451-57 (2006) https://doi.org/10.4191/KCERS.2006.43.8.451
  20. H. J. Park, H. E. Kim and K. Niihara, 'Microstructure and High-Temperature Strength of $Si_3N_4$-SiC Nanocomposite,' J. Eur. Ceram. Soc., 18 [7] 907-14 (1998) https://doi.org/10.1016/S0955-2219(97)00180-5
  21. R. L. Satet and M. J. Hoffmann, 'Influence of the Rare- Earth Element on the Mechanical Properties of RE-Mg- Bearing Silicon Nitride,' J. Am. Ceram. Soc., 88 [9] 2485- 90 (2005) https://doi.org/10.1111/j.1551-2916.2005.00421.x