Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Driving Characteristic of Ultrasonic Linear Motor With V-type

V-형 선형 초음파 모터의 구동 특성

  • Published : 2007.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

A linear ultrasonic motor was designed by a combination of the longitudinal and bending mode. linear ultrasonic motors are based on an elliptical motion on the surface of elastic body, such as bar or plates. The corresponding eigen-mode of one resonance frequency can be excited twice at the same time with a phase shift of 90 degrees in space and time. That is excite symmetric and anti-symmetric modes. Then it determines the thrust and speed of the motor. Linear ultrasonic motors are investigated experimentally in according to be fabricated a general classification to motor structure and material characteristic. There was the first to simulate as use of finite element analysis ANSYS 9.0. The AL-T2W8-ARM14-LEG18-ANGLE80 motor has a maxim efficiency 18 % under the speed 0.14 m/s, thrust 345 gf and preload 280 gf, operating frequency is 57.6 kHz.

Keywords

References

  1. 박태곤, 김명호, '압전세라믹 리니어 모타의 동작 원리와 응용', 전기전자재료, 14권, 4호, p.8, 2001
  2. T. G. Park, B. J. Kim, M. H. Kim, and K. Uchino, 'Characteristics of the first Iongitudinal-fourth bending mode linear ultrasonic motors', J.J.A.P., Vol. 45, No. 9B, p. 7139, 2002
  3. 當川義朗, '超音波エレクトロニクス振動論', 朝倉書店, p. 164, 1997
  4. T. Kosawada, K. Suzuki, and T. Tomikawa, 'A card sending linear ultrasonic motor using multi-beam piezoeletric vibrators', International Journal of Applied Electromagnetics in Materials, Vol. 2, p. 285, 1992
  5. Matweb, automation creations, Inc., http:// www.matweb.com, 1996-2005