References
- Kwon, K. S., Shin, S. J. and Kim, S. J., 2005, 'The Opportunity of Printing Technology for Display Manufacturing Process', Proceedings of Colloquium on Micro/Nano Thermal Engineering, Seoul National University
- Bale, M., et al, 2006, 'Ink Jet Printing: The Route to Production of Full Color P-OLED Displays', Research Paper, Website: http://www.cdtltd.co.uk
- Rhee, J., et al, 2006, 'A 14.1-in Full-color Polymer-LED Display with a-Si TFT Backplane by Ink-jet Printing', SID (society for information display)
- Gohda, T., et al., 2006, 'A 3.6-in 202-ppi Full-color AMPLED Display Fabricated by Ink-jet Method', SID
- Koo, H. S. et al, 2006, 'Fabrication and Chromatic Characteristics of the Greenish LCD Colour-filter Layer with Nano-particle Ink Using Inkjet Printing Technique', Displays, Vol. 27, pp. 124-129 https://doi.org/10.1016/j.displa.2006.04.001
- Creagh, L. T. et al., 2004, 'FPD Manufacturing Conference, Ink Jet Printhead as a precision deposition tool in manufacturing FPDs', SEMICON China
- Albertalli, D., 2005, 'Gen 7 FPD Inkjet Equipment Development status', SID
- Bogy, D. B. and Talke, F. E., 1984, 'Experimental and Theoretical Study of Wave Propagation Phenomena in Drop-on-demand Ink Jet Devices', IBM Journal of Research and Development, Vol. 28, No. 3, pp. 314-321 https://doi.org/10.1147/rd.283.0314
- Microfab technote, 1999, 'Drive Waveform Effects on Ink-jet Device Performance', 99-03
- Molesa, S. E., 2006, 'Ultra-low-cost Printed Electronics', Ph.D. Dissertation, University of California, Berkeley
- Dong, H. and Morris, J. F., 2006, 'An Experimental Study of Drop-on-demand Drop Formation', AIP, Physics of fluids, Vo. 18, 072102
- Szczech, J. B., Gamota, D. R., Zhang, J., 2002, 'Fine-line Conductor Manufacturing Using Drop-on-demand PZT Printing Technology', IEEE Transactions on Electronics Packaging Manufacturing, Vol. 25, No. 1, pp.26-33 https://doi.org/10.1109/TEPM.2002.1000480
- Lee, C., Toshihiro, I. and Suga, T., 1999, 'Self-excited Piezoelectric PZT Microcantilevers for Dynamic SFM with Inherent Sensing and Actuating Capabilities', Sensor and Actuators A, Vol. 72, pp. 179-188 https://doi.org/10.1016/S0924-4247(98)00212-X
- Giurgiutiu, V. and Zagrai A. N., 2002, 'Embedded Self-sensing Piezoelectric Active Sensors for On-line Structural Identification', Journal of Vibration and Acoustics, ASME, Vol. 124, pp. 116-125 https://doi.org/10.1115/1.1421056
- Wassink, M. B. G., Bosch, M. J. M., Bosgra, O. H. and Koekebakker, S., 2005, 'Enabling Higher Jet Frequencies for an Inkjet Printhead Using Iterative Learning Control', Proceedings of the 2005 IEEE Conference on Control Applications, Toronto, Canada, Aug. 28-31
- Groninger, M. A., Kruiit, P. G. M., Reinten, H., Schippers, R. H. and Simons, H. M. M., 2003, 'A Method of Controlling an Inkjet Printhead, an Inkjet Printhead Suitable for Use of Said Method, and an Inkjet Printer Comprising Said Printhead', European patent, EP 1 378 360 A1
- Horowitz, P. and Hill Windfield, 1989, 'The Art of Electronics', Cambridge University Press
- Website: http://www.dimatix.com
Cited by
- Optimization of the Excitation signal for a novel piezoelectric micro-jet vol.61, pp.2261-236X, 2016, https://doi.org/10.1051/matecconf/20166101025