참고문헌
- Armon, D. and Ben Haim, Y and Braun, s., 1994, 'Crack Detection in Beams by Rank Ordering of Eigenfrequency Shift', Mechanical Systems and Signal Processing, Vol.8, Nol, pp. 81-91 https://doi.org/10.1006/mssp.1994.1006
- Kam, T. Y. and Lee, T. Y., 1992, 'Detection of Cracks in Structures using Modal Test Data, Engineering Fracture Mechanics, Vol. 42. No.2, pp. 381-387 https://doi.org/10.1016/0013-7944(92)90227-6
- Lee, T. Y and Kam, T. Y, 1993, 'Detection of Crack Location via a Global Minimization Approach', Engineering Optimization, Vol. 21, No2, pp. 147-159 https://doi.org/10.1080/03052159308940972
- J.K. Hwang, M. H. Lee, Y. J. Shin, and C. H. Kim 'Vibration Analysis of a beam Having n Through the width Splits', Transactions of the korean society for noise and vibration engineering Vol. 12, No.5, 2002, pp. 330-337 https://doi.org/10.5050/KSNVN.2002.12.5.330
- 이중엽, 황호연, '주파수 응답함수에 기초한 구조물 손상탐지', 한국항공우주학회지, pp. 46-57
- Hwang Ho-Yon, 'Identification Methods for Physical Parameters in Structures', Doctoral Thesis, Georgia Institute of Technology, May 1993, pp. 74-104
- B. P. Nandwana and S. K. Maiti 'Detection of the location and size of a crack in stepped cantilever beams based on measurements of natural frequencies', Journal of Sound and Vibration Vol. 203, No.3, 1997, pp. 435-446 https://doi.org/10.1006/jsvi.1996.0856
- X. F. Yang, A. S. J. Swamidas and R. Seshadri 'Crack Identification in vibration beams using the energy method, Journal of Sound and Vibration Vol. 244, No.2, 2001, pp. 339-357 https://doi.org/10.1006/jsvi.2000.3498
- D. J. Inman, 'Engineering Vibration, 2nd Edition, Prentice Hall International, Inc. 2001
- H. Y. Hwang, C. Kim, 'Damage Detection in Structures using a few frequency response measurements', Journal of Sound and Vibration, Vol. 270, Issues 1-2, 2004, pp. 1-14 https://doi.org/10.1016/S0022-460X(03)00190-1
- E. E. Gdoutos 1993 'Fracture Mechanics', pp. 79-91 and 53-56. Kluwer Academic Publishers
피인용 문헌
- Development of the Natural Frequency Analysis System to Examine the Defects of Metal Parts vol.24, pp.3, 2015, https://doi.org/10.5369/JSST.2015.24.3.169
- Feasibility Study on Neck Defect Inspection Technique for Press-formed Products by Using Structural Vibration Measurement vol.28, pp.6, 2018, https://doi.org/10.5050/KSNVE.2018.28.6.721