DOI QR코드

DOI QR Code

Development of a Posture Classification Scheme Reflecting the Effects of External Load and Motion Repetition

외부 부하, 동작 반복 효과가 반영된 자세 분류 체계의 개발

  • Kee, Do-Hyung (Department of Industrial & Systems Engineering, Keimyung University)
  • 기도형 (계명대학교 산업시스템공학과)
  • Published : 2007.02.28

Abstract

The purpose of this study was to develop a comprehensive posture classification scheme considering the effects of external load and motion repetition as well as those of working posture. The scheme was developed based on a series of existing empirical studies dealing with postural classification scheme, effects of external load and motion repetition. Ranges of joint motions, external load and motion repetition were divided into the groups with the same degree of discomforts. Each group was assigned a numerical relative discomfort score of code on the basis of discomfort values for the neutral position of elbow flexion. The criteria for evaluating stress of working postures were proposed based on the four distinct action categories, in order to enable practitioners to apply appropriate corrective actions. The proposed scheme was compared with OWAS, RULA and REBA. The comparison revealed that while the proposed scheme and RULA showed similar results for the working postures with light external load and non-repetitive postures, the former overestimated postural load for postures with moderate or heavy external load and repetitive postures than the latter.

Keywords

References

  1. 기도형, 인체 관절 동작의 지각 불편도에 근거한 상체의 자세 분류 체계의 개발, 대한산업공학회지, 24(3), 447-455, 1998
  2. 기도형, 작업 자세 부하 평가를 위한 자세 분류 체계의 연구 현황 - 관측법을 중심으로, 한국산업안전학회지, 15(4), 139-149, 2000
  3. 기도형, 외부 부하와 반복에 따른 팔 동작의 심물리학적 자세 부하, 산업공학, 17(2), 218-225, 2004a
  4. 기도형, 손목 동작의 반복과 외부 부하에 따른 심물리학적 부하, 한국안전학회지, 19(4), 123-128, 2004b
  5. 기도형, 박기현, 작업 자세 평가 기법 OWAS, RULA, REBA 비교, 한국안전학회지, 20(2), 127-132, 2005
  6. 김동진, 나석희, 박국무, 기도형, 정민근, 어깨와 팔꿈치의 조합 자세 및 외부 부하가 지각불편도에 미치는 영향, 대한인간공학회지, 25(4), 145-151, 2006 https://doi.org/10.5143/JESK.2006.25.4.145
  7. 나석희, 지각 불편도에 근거한 외부 하중이 고려된 관찰적 자세 부하 평가 기법, 포항공과대학교 산업경영공학과 박사학위 논문, 2006
  8. 노동부, 산업 재해 분석, 2003-2004
  9. 류태범, 박용주, 나석희, 정민근, 기도형, 외부 부하가 부과된 어깨 자세의 심물리학적 불편도 평가, 대한인간공학회지, 24(2), 9-15, 2005 https://doi.org/10.5143/JESK.2005.24.1.009
  10. 이인석, 관절동작 불편도에 근거한 심물리학적 자세부하 평가 모델, 포항공과대학교 기계산업공학부 박사학위논문, 2002
  11. Armstrong, T., Punnett, L. and Ketner, P., Subjective worker assessment of hand tools used in automobile assembly, American Industrial Hygiene Association Journal, 50, 639-645, 1989 https://doi.org/10.1080/15298668991375290
  12. Chaffin, D. B., Andersson, G. B. J. and Martin, B. J., Occupational Biomechanics, 3rd ed., John Wiley & Sons, Inc., New York, 1999
  13. Chung, M. K., Lee, I. and Kee, D., Assessment of postural load for lower limb postures based on perceived discomfort, International Journal of Industrial Ergonomics, 31, 17-32, 2003 https://doi.org/10.1016/S0169-8141(02)00115-4
  14. Faucett, J., Garry, M., Nadler, D. and Ettare, D., A test of two training interventions to prevent work-related musculoskeletal disorders of the upper extremity, Applied Ergonomics, 33, 337-347, 2002 https://doi.org/10.1016/S0003-6870(02)00006-6
  15. Genaidy, A. M., Al-Shedi, A. A. and Karwowski, W., Postural stress analysis in industry, Applied Ergonomics, 25(2), 77-87, 1994 https://doi.org/10.1016/0003-6870(94)90068-X
  16. Gescheider, G. A., Psychophysics: Method, theory, and application, Lawrence Erlbaum Associates, Publishers, London, 1985
  17. Grandjean, E., Fitting the task to the man, Taylor & Francis, London, 1993
  18. Hignett, S. and McAtamney, L., Rapid entire body assessment(REBA), Applied Ergonomics, 31, 201-205, 2000 https://doi.org/10.1016/S0003-6870(99)00039-3
  19. Karhu, O., Kansi, P. and Kuorinka, I., Correcting working postures in industry: A practical method for analysis, Applied Ergonomics, 8(4), 199-201, 1977 https://doi.org/10.1016/0003-6870(77)90164-8
  20. Kee, D. and Karwowski, W., LUBA: an assessment technique for postural loading on the upper body based on joint motion discomfort and maximum holding time, Applied Ergonomics, 32, 357-366, 2001 https://doi.org/10.1016/S0003-6870(01)00006-0
  21. Kilbom, A., Assessment of physical exposure in relation to work-related musculoskeletal disorders - what information can be obtained from systematic observations?, Scandinavian Journal of Work, Environment and Health, 20, 30-45, 1994
  22. Kroemer, K. H. E., Cumulative trauma disorders: Their recognition and ergonomics measures to avoid them. Applied Ergonomics, 20(4), 274-280, 1989 https://doi.org/10.1016/0003-6870(89)90190-7
  23. Li, G. and Buckle, P., Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods, Ergonomics, 42(5), 674-695, 1999 https://doi.org/10.1080/001401399185388
  24. McAtamney, L. and Corlett, E. N., RULA: A survey method for the investigation of work-related upper limb disorders, Applied Ergonomics, 24(2), 91-99, 1993 https://doi.org/10.1016/0003-6870(93)90080-S
  25. National Institute for Occupational Safety and Health (NIOSH), Musculo-skeletal disorders and workplace factors: A critical review of epidemiologic evidence for work-related musculoskeletal disorders of the neck, upper extremity, low backs, DHHS (NIOSH) Publication No. 97-141, US Department of Health and Human Services, 1997
  26. Winkel, J. and Mathiassen, S. E., Assessment of physical work load in epidemiologic studies: Concepts, issues and operational considerations, Ergonomics, 73(6), 979-988, 1994
  27. Zwislocki, J. J. and Goodman, D. A., Absolute scaling and sensory magnitudes: A validation, Perception and Psychophysics, 28, 28-38, 1980 https://doi.org/10.3758/BF03204312

Cited by

  1. Prevention and Management of Musculoskeletal Disorders in Automobile-related Industries vol.29, pp.4, 2010, https://doi.org/10.5143/JESK.2010.29.4.479
  2. Ergonomics' Role for Preventing Musculoskeletal Disorders vol.29, pp.4, 2010, https://doi.org/10.5143/JESK.2010.29.4.393