참고문헌
- D. H. Middleton, Composite materials in aircraft structures, Longman scientific & Technical, New York, 1990
- M. C. Y. Niu, Composite airframe structures, Conmilit Press, Hong Kong, 1992
- K. S. Kim, J. S. Yoo, Y. M. Yi and C. G. Kim, 'Failure mode and strength of uni-directional composite single lap bonded joints with different bonding methods', Composite Structures, Vol. 72, 2006, pp. 477-485 https://doi.org/10.1016/j.compstruct.2005.01.023
- 김광수, 이영무, 김천곤, '일방향 복합재료 single lap 접합 조인트의 파손모드 및 파손 강도 II. 파손예측' 복합재료학회지, 제 18권, 제 1호, 2005, pp. 1-9
- T. P. Lang and P. K. Mallick, 'Effect of spew geometry on stresses in single lap adhesive joints', International Journal of Adhesion & Adhesives, Vol. 18, 1998, pp. 167-177 https://doi.org/10.1016/S0143-7496(97)00056-0
- 이중삼, 임재규, 김연직, '단일겹침 접착제 접합부의 응력분포와 강도평가' 한국용접학회지, 제 19권, 제 3호, 2001, pp. 342-347
- M. Quaresimin and M. Ricotta, 'Fatigue behaviour and evolution of single lap bonded joints in composite material', Composites Science and Technology, Vol. 66, 2006, pp. 176-187 https://doi.org/10.1016/j.compscitech.2005.04.026
- J. F. P. Owens and P. Lee-Sullivan, 'Stiffness behaviour due to fracture in adhesively bonded composite-to-aluminum joints I. theoretical model', International Journal of Adhesion & Adhesives, Vol. 20, 2000, pp. 39-45 https://doi.org/10.1016/S0143-7496(99)00013-5
- J. F. P. Owens, P. Lee-Sullivan, 'Stiffness behaviour due to fracture in adhesively bonded composite-to-aluminum joints II. experimental', International Journal of Adhesion & Adhesives, Vol. 20, 2000, pp. 47-58 https://doi.org/10.1016/S0143-7496(99)00014-7
- S. C. Her, 'Stress analysis of adhesively-bonded lap joints', Composite Structures, Vol. 47, 1999, pp. 673-678 https://doi.org/10.1016/S0263-8223(00)00052-0
- L. J. Hart-Smith, 'Adhesive-bonding double-lap joints' NASA CR-112235, 1973
- J. H. Kweon, J. W. Jung, T. H. Kim, J. H. Choi, D. H. Kim, 'Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding', Composite Structures, Vol. 75, 2006, pp. 192-198 https://doi.org/10.1016/j.compstruct.2006.04.013
- P. T. Cheuk, L. Tong, C. H. Wang, A. Baker, P. Chalkley, 'Fatigue crack growth in adhesively bonded composite-metal double-lap joints', Composite Structures, Vol. 57, 2002, pp. 109-115 https://doi.org/10.1016/S0263-8223(02)00074-0
- J. K. Choi and D. G. Lee, 'Experimental investigation of the static torque transmission capabilities of the adhesively bonded single lap joints', Journal of Materials Processing Technology, Vol. 48, 1995, pp. 341-347 https://doi.org/10.1016/0924-0136(94)01667-P
- J. H. Choi and D. G. Lee, 'The torque transmission capabilities of the adhesively bonded tubular single lap joint and the double lap joint', Journal of Adhesion, Vol. 44, 1994, pp. 197-212 https://doi.org/10.1080/00218469408027077
- Cytec Engineering Materials, Ltd, FM73 toughened epoxy film
- K. D. Potter, F. J. Guild, H. J. Harvey, M. R. Wisnom and R. D. Adams, 'Understanding and control of adhesive crack propagation in bonded joints between carbon fibre composite adherends I. Experimental', International Journal of adhesion & Adhesive, Vol. 21, 2001, pp. 435-443 https://doi.org/10.1016/S0143-7496(01)00020-3
피인용 문헌
- In-mold Assembly of Polymer and Surface-machined Sheet Metal by Insert Injection Molding vol.20, pp.1, 2011, https://doi.org/10.5228/KSTP.2011.20.1.64