A Study on BTEX Removal Efficiency for Variation of Moistures by Microwave Process

유류오염토의 마이크로파 처리 시 토양의 함수율 변화에 따른 BTEX 제거특성에 관한 연구

  • Ha, Sang-An (Department of Environmental Engineering, Silla univeristy) ;
  • Yeom, Hae-Kyong (Department of Environmental Engineering, Silla univeristy) ;
  • Yu, Mi-Yong (Department of Environmental Engineering, Silla univeristy)
  • Published : 2007.04.30

Abstract

This study has been focused on an application of microwave pre-treatment of soil contaminated with volatile organic chemicals, and BTEX(benzene, toluene, ethylene, xylene). Microwave experiments were carried out under different power conditions (2 kW, 4 kW) using different moisture contents and BTEX concentration. According to these results of this study, the most BTEX removal efficiency was with 20% moisture contents regardless of electric power. The result show that 2kW was determined to the optimum electric power at $10{\sim}30%$ moisture contents, but the optimum power was 4 kW at 50% of moisture content.

토양복원의 기술로 마이크로파를 이용할 시 휘발성물질((PAH)s 등)) 및 준휘발성((PCB)s 등) 물질 등을 처리하는데 효과적인 것으로 알려져 있다. 본 연구에서는 휘발성 물질인 BTEX를 마이크로파를 이용하여 수분변화 및 전력변화에 따른 제거특성을 연구하였다. 10%, 20%, 30%, 50%의 함수율 변화에 따른 BTEX 제거율은 20%일 때가 제거율이 가장 높음을 제거상수를 통해 도출할 수 있었으며, 전력의 변화에 따른 BTEX 제거율 및 제거율에 도달하는 시간은 비슷한 것으로 나타났다. 각각 다른 함수율이 마이크로파 처리 시 한계함수율에 도달하는 시간을 측정한 결과, 한계함수율에 도달하는 시간은 함수율이 10%, 20%, 30%일 때는 2 kW와 4 kW는 큰 차이가 없음을 알 수 있었고, 함수율이 50%일 경우는 한계함수율에 도달하는 시간이 4kW가 더 빠른 것으로 나타났다. 수분함수율에 따른 최적전력을 도출하면 수분함량이 $10{\sim}30%$ 시 2 kW가 경제적으로 나타났으며, 함수율이 50% 일 경우는 전력이 4 kW일 때 경제적인 것으로 나타났다.

Keywords

References

  1. 문경환, 김덕찬, 1996, 마이크로파 가열에 의한 토양 유기오염물 질 탈착특성, 대한환경공학회, 11(2) 66-72
  2. 문경환, 김우현, 이병철, 김덕현, 1996, 마이크로파에 의한 휘발 성 유기토양오염물질제거에 관한연구, 한국환경위생학회, 2(3) 16-122
  3. 토양환경공학, 향문사, 한국지하수토양환경학회, p.65-66
  4. Collin, R.E., 1985, Foundations for Microwave Engineering, McGraw-Hill, New York
  5. Datta, Ashim K., 1990, Heating and Mass Transfer in the Microwave Processing of Food. Chemical Engineering Progress, p. 47-53
  6. Peterson, K.W., Button, J.R., and Annett, D.A., 1986, Selected Applications in High Frequency and Microwave Heating, An Economic Commentary, Ratio Frequency Radiation Processing
  7. Perkin, R.M,, 1980, The heat and mass transfer characteristics of boiling point drying using radio frequency and microwave electromagnetic fields, Int J. Heat Mass Transfer, 23, 687-695 https://doi.org/10.1016/0017-9310(80)90013-7
  8. Suzuki, J., 1990, A Microwave Burning Processing for Waste Disposal, J. Microwave Power and Electromagnetic Energy, 25(3) 168-176 https://doi.org/10.1080/08327823.1990.11688125
  9. Tuner, I. and P. Jolly., 1988, The Effect of Dielectric Properties on Microwave Drying Kinetics. J. Microwave Power and Electromagnetic Energy, 23(3), 211 https://doi.org/10.1080/08327823.1988.11688059