Journal of Electrical Engineering and Technology

  • 제2권1호
  • /
  • Pages.68-80
  • /
  • 2007
  • /
  • 1975-0102(pISSN)
  • /
  • 2093-7423(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Thyristor-Based Resonant Current Controlled Switched Reluctance Generator for Distributed Generation

  • Emadi Ali (Department of Electrical and Computer Engineering, Illinois Institute of Technology) ;
  • Patel Yogesh P. (Department of Electrical and Computer Engineering, Illinois Institute of Technology) ;
  • Fahimi Babak (Department of Electrical and Computer Engineering, University of Texas at Arlington)
  • 발행 : 2007.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper covers switched reluctance generator (SRG) and its comparison with induction and synchronous machines for distributed generation. The SRG is simple in design, robust in construction, and fault tolerant in operation; it can also withstand very high temperatures. However, the performance and cost of the SRG power electronics driver are highly affected by the topology and design of the converter. IGBT and MOSFET based converters are not suitable for very high power applications. This paper presents thyristor-based resonant converters which are superior candidates for very high power applications. Operations of the converters are analyzed and their characteristics and dynamics are determined in terms of the system parameters. The resonant converters are capable of handling high currents and voltages; these converters are highly efficient and reliable as well. Therefore, they are suitable for high power applications in the range of 1MW or larger for distributed generation.

키워드

참고문헌

  1. Y. P. Patel, 'Thyristor-based resonant current controlled switched reluctance generator for distributed generation,' M.S. Thesis, Illinois Institute of Technology, Chicago, IL, May 2003
  2. H. Broeck, D. Gerling, and E. Bolte, 'Switched reluctance drive and PWM induction drive compared for low cost applications,' in Proc. 1993 European Conference on Power Electronics and Applications, Sep. 1993, pp 71-76
  3. D. A. Torrey, 'Variable-reluctance generators in wind-energy systems,' in Proc. 24th Annual IEEE Power Electronics Specialists Conference, June 1993, pp. 561-567
  4. B. Fahimi, 'On the suitability of switched reluctance drives for starter/generator application,' in Proc. IEEE 2002 Vehicular Technology Conference, 2002, pp 2070-2075
  5. Radun, 'Generation with the switched reluctance motor,' in Proc. IEEE 9th Applied Power Electronics Conference and Exposition, 1994, pp. 41-47
  6. E. Mese, Y. Sozer, J. M. Kokernak, and D. A. Torrey, 'Optimal excitation of a high speed switched reluctance generator,' in Proc. IEEE 15th Applied Power Electronics Conference and Exposition, 2000, pp. 362-368
  7. Y. P. Patel and A. Emadi, 'Suitability of switched reluctance machines in distributed generation systems,' in Proc. 2003 IASTED International Conference on Power and Energy Systems, Palm Springs, CA, Feb. 2003
  8. D. A. Torrey, 'Switched reluctance generators and their control,' IEEE Trans. on Industrial Electronics, vol. 49, no. 1, pp. 3-14, Feb. 2002 https://doi.org/10.1109/41.982243
  9. M. Barnes and C. Pollock, 'Power electronic converters for switched reluctance drives,' IEEE Trans. on Power Electronics, vol. 13, pp. 1100-1111, Nov. 1998 https://doi.org/10.1109/63.728337
  10. S. Mir, 'Classification of SRM converter topologies for automotive applications,' SAE 2002 World Congress, Detroit, March 2000
  11. V. R. Stefanovic and S. Vukosavic, 'SRM inverter topologies: a comparative evaluation,' IEEE Trans. on Industry Applications, vol. 27, pp. 1034-1047, Nov./Dec. 1991 https://doi.org/10.1109/28.108453
  12. B. Fahimi, G. Suresh, and M. Ehsani, 'Large switched reluctance machines: a 1 MW case study,' in Proc. International Electric Machines and Drives Conference, May 1999, pp. 84-86
  13. T. Uematsu and R. G. Hoft, 'Resonant power electronic control of switched reluctance motor for electric vehicle propulsion,' in Proc. IEEE Power Electronics Specialists Conf., vol. 1, June 1995, pp. 264-269
  14. K.-D. Kim, D.-J. Shin, and U.-Y. Huh, 'Application modified C-dump converter for industrial low voltage SRM,' in Proc. IEEE International Symposium on Industrial Electronics, Pusan, South Korea, 2001, pp. 1804-1809
  15. R. Krishnan and S. Lee, 'Analysis and design of a single switch per phase converter for switched reluctance motor drives,' in Proc. 25th Annual IEEE Power Electronics Specialists Conference, June 1994, pp 485-492