Fabricatin and Hydrogen Storage Property of Mg-33.5%Ni Alloy Powder Prepared by Melt-Spining Process

Melt-spining 공법에 의한 Mg-33.5%Ni 수소 저장 합금 제조 및 수소저장 특성

  • Hong, Seong-Hyeon (Powder Materials Research Division, Division, Korea Institute of Materials Science, Korea Institute of Machinery and Materials) ;
  • Yim, Chang-Dong (New Metal Materials Division, Korea Institute of Materials Science, Korea Institute of Machinery and Materials) ;
  • Bae, Jong-Soo (Powder Materials Research Division, Division, Korea Institute of Materials Science, Korea Institute of Machinery and Materials) ;
  • Na, Young-Sang (Reliability Evaluations Division, Korea Institute of Materials Science, Korea Institute of Machinery and Materials)
  • 홍성현 (한국기계연구원 부설 재료연구소 분말재료연구부) ;
  • 임창동 (한국기계연구원 부설 재료연구소 신금속재료연구부) ;
  • 배종수 (한국기계연구원 부설 재료연구소 분말재료연구부) ;
  • 나영상 (한국기계연구원 부설 재료연구소 신뢰성평가 연구부)
  • Published : 2007.12.15

Abstract

The hyper-eutectic Mg-33.5%Ni alloy was rapidly solidified by melt spinning process. The melt-spun Mg-33.5%Ni has amorphous structure and crystallization occurred above $162^{\circ}C$. The hydriding and dehydriding rates of melt-spun Mg-33.5%Ni increased with cycle and high rate of hydrogen storage occurred at 3rd cycle. The maximum hydrogen amount absorbed in melt-spun Mg-33.5%Ni at $300^{\circ}C$ is about 4.5%.

Keywords

References

  1. 박충년, '수소저장합금', 재료마당, Vol. 15, No. 7, 2002, pp. 34-41
  2. 송명엽, 이동섭, '반응성분쇄에 의해 CoO를 첨가한 Mg의 수소저장특성', 한국수소 및 신에너지학회 논문집, Vol. 14, No. 4, 2003, pp. 321-326
  3. MyoungYoup Song, Jean-Louis Bobet, and Bernard Darriet, 'Improvement in hydrogen sorption properties of Mg by reactive mechanical grinding with $CrO_3$, $Al_2O_3$ and $CeO_2$', J. Alloys and Comp. Vol. 340, Issues 1-2, 2002, pp. 256-262 https://doi.org/10.1016/S0925-8388(01)02021-7
  4. Chang Dong Yim, Yong-Min Moon, Bong Sun You, Young Sang Na, and Jong -Soo Bae, 'Microstructural change of gravity cast Mg-Ni alloys with Ni contents', Metals and Materials International, Vol. 10, No. 6, 2004, pp. 605-608 https://doi.org/10.1007/BF03027424
  5. 임창동, 유봉선, 나영상, 배종수, 'Ni 첨가량에 따른 중력주조 Mg-Ni 합금의 수소화 반응 특성의 변화', 한국수소 및 신에너지학회 논문집, Vol. 15, No. 3, 2004, pp. 250-256
  6. 홍성현, 배종수, 임창동, 나영상, 송명엽, '공정 Mg-Ni계 합금 분말의 제조 및 수소저장 특성,' 한국수소 및 신에너지학회 논문집, Vol. 17, No. 2, pp. 174-180
  7. P. Selvam, B. Viswanathan, C. S. Swamy and V. Srinivasan, 'Surface properties and their consequences on the hydrogen sorption characteristics of certain materials', Journal of the Less Common Metals, Vol. 163, No. 1, 1990, pp. 89-108 https://doi.org/10.1016/0022-5088(90)90088-2
  8. A. Seiler, L. Schlapbach, Th. Von Waldkirch, D. Shaltiel and F. Stucki, 'Surface analysis of $Mg_2Ni-Mg$, $Mg_2Ni$ and $Mg_2Cu$', Journal of the Less Common Metals, Vol. 73, No. 1, 1980, pp. 193-199 https://doi.org/10.1016/0022-5088(80)90360-4
  9. L. Schlapbach, D. Shaltiel and P. Oelhafen, 'Catalytic effect in the hydrogenation of Mg and Mg compounds', Materials Research Bulletin, Vol. 14, No. 9, 1979, pp. 1235-1246 https://doi.org/10.1016/0025-5408(79)90220-4
  10. 권호영, 강일구, '수소저장합금개론', 도서출판 골드, 서울, 2003, pp. 219-235