Abstract
Fiber-sheet and steel-plate strengthening methods have been mainly used for strengthening the RC structures. However, recently the application of these two methods have dramatically decreased due to premature debonding failure between concrete surface and fiber-sheet and heavy self-weight of steel-plate. This article presents experimental results of shear behavior in RC beams strengthened with GSP(Glass fiber-Steel composite Plate). The thin steel plate in GSP makes usage of the anchoring system possible, which could delay or prevent the premature debonding failure. Three reference beams and 60 strengthened beams with GSP were tested. The experimental results showed that strengthened beams with GSP considerably increased in shear capacity compared with the reference beams.
섬유시트보강 및 강판보강은 RC 구조물에 주로 사용되었으나, 이들은 조기부착파괴나 자중의 과다 등의 단점을 가지고 있어 현실적으로 적용사례가 대폭 줄어들고 있는 실정이다. 본 연구에서는 전단강도 증가를 위해 GSP(Glass fiber-Steel composite Plate)로 전단보강된 RC 보의 실험한 결과를 제시한다. GSP는 높은 강도의 유리섬유시트를 조기탈락하지 않도록 앵커링할 수 있으며, 정착시 섬유시트의 손상을 방지할 수 있도록 얇은 강판을 섬유시트 사이에 둔 보강재료이다. 기준 실험보 3개와 GSP로 전단보강된 보 60개로 전단실험을 수행하였다. 본 연구는 GSP로 전단보강된 RC보의 전단 보강효과를 평가하며, 이 실험결과 GSP로 전단보강된 RC보의 전단강도는 기준실험보에 비하여 현저히 증가하였음을 확인하였다.