Abstract
In an attempt to develop an efficient method for the propagation of mature Prunus yedoensis (45 to 55 years old), green wood cuttings from normal branch and sprouts branch were treated with three different kinds of auxin (Rootone < 1-naphthylacetamide 0.4% >, IBA 100 ppm, and control and two different kinds of fog systems (0.9 L/min. and 0.54 L/min.). The Rootone treatment showed higher values in the percentage of rootings (PR) and the mean number of roots per cutting (NR) than the IBA treatment in the early stage. However, in the late stage, the values of PR and NR in the Rootone treatment become lower than those in the IBA 100 ppm treatment. On the other hand, root development ceased 62 days after taking cuttings for all of the treatments. The IBA 100 ppm treatment showed the best performance in root development (PR= 89.5%, NR = 6.5, LR=6.4 cm). The values of PR (76.5%) and NR (6.4) in the 0.9 L/min. of fog treatment was higher than those (PR = 71.7% and NR = 5.4) in the 0.54 L/min. of fog treatment. The cuttings from sprouts (PR: 74.8%, NR: 5.9, LR: 5.7 cm) showed slightly better performance in rooting rate that the cuttings from shoots (PR : 73.3%, NR: 5.9, LR: 5.4 cm). Statistically significant interactions were presented among most of the different combinations of three factors (auxin treatments, fog treatments, and types of cuttings). The PR showed the highest value of 98.0% in the combination of cuttings of shoots+IBA 100 ppm+0.54 L/min. fog treatments. In case of NR, the cuttings from normal branch showed a higher value than the cuttings from sprouts branch under the fog treatment of 0.9 L/min., while this tendency was reversed under the fog treatment of 0.54 L/min.. The perigon development of roots, which reflects the number and the direction of roots, was best in the IBA treatment (85.6%).
왕벚나무 성숙목(45~55년생)의 효율적인 번식방법을 구명하기 위해 삽목 후 시기별 발근특성과 auxin 처리(Rootone, IBA 100 ppm, 무처리), 녹지삽수 종류(일반지, 맹아지) 및 fog 분무량(0.9 L/min., 0.54 L/min.)의 상이한 조합의 삽목실험이 수행되었다. 삽목기간에 따른 시기별 발근특성 중 발근율(PR)과 뿌리수(NR)에서, Rootone(l-naphthylacetamide 0.4%) 처리는 삽목 후 초기 발달이 매우 활발했으나 삽목 62일 후의 최종 결과는 오히려 발근이 늦게 시작된 IBA 100 ppm 처리가 지속적인 증가 추세를 보여 우세했다. 발근 완료시기는 2차근이 경화되는 삽목 후 62일 이후로 나타났다. 발근특성과 관련된 auxin, fog 분무량 및 녹지삽수 종류의 3요인 비교실험에서 auxin 처리는 IBA 100 ppm이 발근율 89.5%, 뿌리수 6.5개, 뿌리길이 6.4 cm로 가장 우수하였다. Fog 분무량 별로는 0.9 L/min.의 삽목실에서 발근율 76.5%, 뿌리수 6.4개로 0.54 L/min. 삽목실의 71.7%, 5.4개 보다 높게 나타났다. 삽수 종류에 따라서는 맹아지 녹지삽수에서 발근율 74.8%, 뿌리수 5.9개, 뿌리길이 5.7 cm로 일반지 녹지삽수의 73.3%, 5.9개, 5.4 cm보다 발근율만 약간 큰 값을 보였다. 3요인 대부분의 조합간에 상호작용이 인정되었다. 발근율은 평균적으로 맹아지 삽수가 다소 우수하였으나 일반지 녹지삽수+IBA 100 ppm+fog 분무량 0.54 L/min.에서 98.0%로 가장 우수하였다. 뿌리수는 fog 분무량 0.9 L/min.에서 일반지 녹지삽수가 우수했으나, 0.54 L/min.에서는 반대의 경향을 보였다. 삽목묘에서 가장 이상적이라 할 수 있는 $360^{\circ}$의 발근 형성은 IBA 100 ppm 처리에서 85.6%로 가장 우수하였다.