Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지

Development of a Pipe Modeling System based on the Hull Structural Model Applying the Rapid Pipe Routing Method

쾌속 배관 라우팅 방법을 적용한 선체 구조 모델 기반의 배관 모델링 시스템 개발

  • 노명일 (울산대학교 조선해양공학부) ;
  • 최우영 (서울대학교 조선해양공학과 대학원 및 대우조선해양(주)) ;
  • 이규열 (서울대학교 조선해양공학과 및 해양시스템공학연구소)
  • Published : 2007.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

The present pipe modeling method requires detailed inputs from a designer to generate a pipe model, and thus it takes much time for the designer to perform such task. Moreover, the pipe model has no relation with the hull structure. Thus, it is time-consuming and requires much effort if design changes arise. In this study, a generating method that generates quickly many pipes using a pipe tray and a conversion method that converts automatically the pipes into objects related with the hull structure are proposed. A pipe modeling system based on the proposed methods is developed. The applicability of the developed system is demonstrated by applying it to the generation of the pipe model of a deadweight 300,000 ton VLCC(Very Large Crude oil Carrier). The results show that the developed system can quickly generate the pipe model in relation with the hull structure.

Keywords

References

  1. Mitsuta, T., Wada, Y., Kobayashi, Y. and Kiguchi, T., 'A Knowledge-Based Approach to Routing Problems in Industrial Plant Design', The 6th International Workshop on Expert Systems and Applications, Avignon, France, April, pp. 237-256, 1986
  2. Kim, D. G. and Corne, D., 'Industrial Plant Pipe-Route Optimisation with Genetic Algorithms', in Parallel Problem Solving from Nature IV, pp. 1012-1021, Springer, Berlin, 1996
  3. Ito, T., 'A Genetic Algorithm Approach to Piping Route Path Planning', Journal of Intelligent Manufacturing, Vol. 10, No. 1, pp. 103-114, 1999 https://doi.org/10.1023/A:1008924832167
  4. Park, J. H., Pipe-Routing Algorithm Development for Ship Engine Room Design, Ph.D. Thesis, University of Washington, 2002
  5. 노명일, 이규열, '객체 지향 초기 선체 구조 설계 시스템 개발', 한국CAD/CAM학회 논문집, Vol. 10, No. 4, pp. 244-253, 2005. 8
  6. 노명일, 이규열, '선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구', 한국CAD/CAM학회 논문집, Vol. 11, No. 2, pp. 115-127, 2006. 4