초록
해상에서 이루어지는 암굴착 공사는 평균해수면 이하를 기준으로 수중으로 설계가 되어 있다고 하더라도, 조석간만의 차가 심한 서해와 남해의 경우에는 조석의 주기에 따라 해수면 위로 작업면이 노출되는 동안 육상작업이 가능해진다. 이를 활용할 경우 수중 작업 시 작업자의 위험성 증대, 작업효율의 저하 및 공사비 증대에 관한 수중공사의 단점을 보완할 수 있는 하나의 대안이 될 수 있다. 그러나 작업해야할 암굴착면의 높이와 조석에 따라 변화하는 수면의 높이에 따라 작업면의 노출시간, 즉 작업가능시간이 변화하게 되며 이에 따라 공사비의 변화도 발생하게 된다. 따라서 본 연구에서는 해상 암굴착 공사를 수행할 때 수중 작업과 비교하여 조석간만의 차를 이용한 공사의 경제성을 분석하고, 작업가능시간을 산정하여 작업시간별 경제성을 분석할 수 있는 방법을 제시함으로써, 조석간만의 차를 이용한 해상 암굴착 공사방식의 적용가능성을 모색해 보고자한다.
The rock excavation work on the sea is planned as underwater process if the elevation of the rock is lower than the M.S.L.(Mean Sea Level). However, in case of West and South sea which are largely different between the rise and fall of the tide, the earth work can be performed on the ground while the work surface is exposed above the sea according to the tide cycle. Thus, it may a good substitute to make up for shortcomings of underwater construction works such as safety problems of workers, loss of efficiency and increasement of construction costs. But the difference between the height of the rock excavation surface and the water surface changed by the tide makes the exposure time of work surface, that is the possible working hours be changed. Also, it may cause the changes of construction cost. Thus, this study analyzes the economical efficiency of the construction method using the difference between the rise and fall of the tide in comparison with the construction method which is performed under the sea, and it also suggests the way to analyze the economical working hours by estimating the possible working hours on the ground. We also try to find out the application possibility of the way like the rock excavation work on the sea using the difference between rise and fall of the tide.