전력전자학회논문지 (The Transactions of the Korean Institute of Power Electronics)

  • 제12권1호
  • /
  • Pages.65-73
  • /
  • 2007
  • /
  • 1229-2214(pISSN)
  • /
  • 2288-6281(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지

저속영역에서 교류전동기의 정확한 자속추정을 위한 전류측정오차 보상

Correction on Current Measurement Errors for Accurate Flux Estimation of AC Drives at Low Stator Frequency

  • 발행 : 2007.02.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 1-Hz의 낮은 고정자 전류 주파수에서도 동작하는 순수적분 기반의 자속추정을 위한 온라인 전류측정 오차 보상방법을 제안한다. 오프셋 전류와 변환이득오차에 의한 역상분 전류 성분은 상태관측기를 이용하여 제거하고, 동시에 변환이득오차에 의한 역상분 전류는 동기좌표계에서 영구자석에 의하여 발생된 q축 자속을 기준모델에 의한 값과 추정된 자속에 의한 값 사이의 차이에 의하여 보상한다. 이 보상기는 PI제어기를 이용하여 두 값 사이의 오차가 0이 되도록 제어한다. 또한 적분기 초기값 오차 및 관측기의 전동기 상수 오차에 의한 잔여오차 보상방법도 제안하였다. 타당성을 입증하기 위하여 1.1-kW 영구자석형 동기전동기(PMSM)에 제안된 보상 방법을 구현하여 다양한 실험을 수행하였다.

This paper presents an on-line correction method of current measurement errors for a pure-integration-based flux estimation down to 1-Hz stator frequency. An observer-based approach is taken as one possible solution of eliminating the dc offset and the negative sequence component of unbalanced gains in the synchronous coordinate. At the same time, the positive sequence component estimation is performed by creating an error signal between a motor model reference and an estimated q-axis rotor flux established by a permanent magnet (PM) in the synchronous coordinate. The compensator utilizes a PI controller that controls the error signal to zero. The proposed technique further contains a residual error compensator to completely eliminate miscellaneous disturbances in the estimated flux. The developed algorithm has been implemented on a 1.1-kW permanent magnet synchronous motor (PMSM) drive to confirm the effectiveness of the proposed scheme.

키워드

참고문헌

  1. P. L. Jansen, R. D. Lorenz, and D. W. Novotny, 'Observer-based direct field orientation,' IEEE Trans. Ind .Appl., vol.30, pp.945-953, July/Aug.1994 https://doi.org/10.1109/28.297911
  2. J. Holtz and J. Quan, 'Drift and parametercompensated flux estimator for persistent zerostator-frequency operation of sensorless-controlled induction motors,' IEEE Trans. Ind. Appl. vol.39, pp.1052-1060, July/Aug.2003 https://doi.org/10.1109/TIA.2003.813726
  3. M. Comanescu and L. Xu, 'An improved flux observer based on PLL frequency estimator for sensorless vector control of induction motors,' IEEE Trans. Ind. Electron., vol.53, pp.50-56, Feb.2006 https://doi.org/10.1109/TIE.2005.862317
  4. M. Marchesoni, P. Segarich, and E. Soressi, 'A simple approach to flux and speed observation in induction motor drives,' IEEE Trans. Ind. Electron., vol. 44, pp. 528-535, Aug. 1997 https://doi.org/10.1109/41.605630
  5. C. Silva, G. M. Asher, and M. Sumner, 'Hybrid rotor position observer for wide speed-range sensorless PM motor drives including zero speed,' IEEE Trans. Ind. Electron., vol.53, pp.373-378, Apr.2006 https://doi.org/10.1109/TIE.2006.870867
  6. ABB AC Drives ACS 800 Catalogue, ABB Industrial Systems Ltd, 2003
  7. J. W. Choi and S. K. Sul, 'Inverter output voltage synthesis using novel dead time compensation,' IEEE Trans. Power Electron., vol.11, pp.221-227, Mar.1996 https://doi.org/10.1109/63.486169
  8. N. Urasaki, T. Senjyu, T. Kinjo, T. Funabashi, and H. Sekine, 'Dead-time compensation strategy for permanent magnet synchronous motor drive taking zero-current clamp and parasitic capacitance effects into account,' IEE Proc. Electr. Power Appl., vol.152 , no.4, pp.845-853, July2005 https://doi.org/10.1049/ip-epa:20045123
  9. B. K. Bose, M. G. Simoes, D. R. Crecelius, K. Rajashekara, and R. Martin, 'Speed sensorless hybrid vector controlled induction motor drive,' in Proc.30th IAS Annu. Meeting, Orlando, FL, Oct.8-12, 1995, pp.137-143
  10. R. J. Kerkman, B. J. Seibel, T. M. Rowan, and D. W. Schlegel, 'A new flux and stator resistance identifier for AC drive systems,' IEEE Trans. Ind. Appl., vol.32, pp.585-593, May/June1996 https://doi.org/10.1109/28.502170
  11. G. Guidi and H. Umida, 'A novel stator resistance estimation method for speed-sensorless induction motor drives,' IEEE Trans. Ind. Appl., vol.36, pp.1619-1627, Nov./Dec.2000 https://doi.org/10.1109/28.887214
  12. D. W. Chung and S. K. Sul, 'Analysis and compensation of current measurement error in vector-controlled AC motor drives,' IEEE Trans. Ind. Appl., vol.34, pp.340-345, Mar./Apr.1998 https://doi.org/10.1109/28.663477
  13. H. S. Jung, S. H. Hwang, J. M. Kim, C. U. Kim, and C. Choi, 'Diminution of current measurement error for vector-controlled AC motor drives,' IEEE Trans. Ind. Appl., vol.42, pp. 1249-1256, Sep./Oct. 2006 https://doi.org/10.1109/TIA.2006.880904
  14. S. H. Song, J. W. Choi, and S. K. Sul, 'Current measurements in digitally controlled AC drives,' IEEE Ind. Appl. Magazine, vol.6, pp.51-62, 2000 https://doi.org/10.1109/2943.847916
  15. J. H. Jang, S. K. Sul, and Y. C. Son, 'Current measurement issues in sensorless control algorithm using high frequency signal injection method,' in Proc. 30th IAS Annu. Meeting, Oct.12-16 2003, pp.1134-1141
  16. M. H. Shin, D. S. Hyun, S. B. Cho, and S. Y. Choe, 'An improved stator flux estimation for speed sensorless stator flux orientation control of induction motors,' IEEE Trans. Power Electron., vol.15, pp. 312-318, Mar. 2000 https://doi.org/10.1109/63.838104
  17. C. H. Choi, K. R. Cho, and J. K. Seok, 'Inverter nonlinearity compensation in the presence of current measurement errors and switching device parameter uncertainties,' IEEE Trans. Power Electron., in press