Friction Property for Angles of Micro-crosshatch Grooved Surface Pattern under Lubricated Sliding Contact

마이크로 Crosshatch 그루우브 표면패턴의 각도에 따른 미끄럼 마찰특성

  • 채영훈 (경북대학교 트라이볼로지연구소)
  • Published : 2007.01.01

Abstract

Some surface pattern of tribological application is an attractive technology of engineered surface. Therefore, friction reduction is considered to be necessary for improved efficiency of machine. This study investigated the effect of friction property for angles of micro-crosshatch groove surface pattern on bearing steel using pin-on-disk test. We obtain sample which can be fabricated by photolithography process. We discuss the friction property depend on an angle of crosshatch groove surface pattern. We can verify the lubrication mechanism as Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter under the lubrication condition. It was found that the friction coefficient was related to angle of crosshatch groove pattern on contact surface.

Keywords

References

  1. Nakada, N., 'Trends in Engine Technology and Tribology,' Tribology International, Vol. 27, No. 1, pp. 3-8, 1994 https://doi.org/10.1016/0301-679X(94)90056-6
  2. Gryk, Y. K. and Etsion, I., 'Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components,' Tribology Transactions, Vol. 45, No.4, pp. 444-449, 2002 https://doi.org/10.1080/10402000208982572
  3. Etion, I., Kligerman, Y. and Halperin, G, 'Analytical and Experimental Investigation of LaserTextured Mechanical Seal Faces,' Tribology Transactions, Vol. 42, No.3, pp. 511-516,1999 https://doi.org/10.1080/10402009908982248
  4. Etsion, I. and Burstein, L., 'A Model for Mechanical Seals with Regular Microsurface Structure,' Tribology Transactions, Vol. 39, No.3, pp. 677-683, 1996 https://doi.org/10.1080/10402009608983582
  5. Etson, I. and Halperin, G, 'A Laser Surface Textured Hydrostatic Mechanical Seal,' Tribology transaction, Vol. 45, No.3, pp. 430-434, 2002 https://doi.org/10.1080/10402000208982570
  6. Wang, X., Kato, K., Adachi, K. and Aizawa, K., 'The Effect of Laser Texturing of SiC Surface on The Critical Load for The Transition of Water Lubrication Mode from Hydrodynamic to Mixed,' Tribology International, Vol. 34, pp. 703-711, 2001 https://doi.org/10.1016/S0301-679X(01)00063-9
  7. Wang, X., Kato, K. and Adachi, K., 'The Lubrication Effect of Mmicro-pits on Parallel Sliding Faces of SiC in Water,' Lubrication Engineering, Aug., pp. 27-34, 2002
  8. Ronen, A., Etsion, I. and Kligerman, Y., 'FrictionReducing Surface-texturing in Reciprocating Automotive Components,' Tribology Transaction, Vol. 44, No.3, pp. 359-366,2001 https://doi.org/10.1080/10402000108982468
  9. Chae, Y. H. and Kim, S. S., 'Friction Characteristics of Micro-scale Dimple Pattern under Mixed and Hydrodynamic Lubrication Condition,' J. of the KSPE, Vol. 22, No.2, pp. 188-193. 2005
  10. Chae, Y. H. and Hsu, S. M. 'Effect of Micro-scale Groove Surface Pattern on Friction Reduction under Sliding Contact,' Extended abstracts of iCAT2004, B-81,2004