Abstract
The repair of concrete surfaces does not normally take into account structural tolerance for longer service lift and better capabilities of concrete structures. In particular, the repair of surface spelling completes as mortar is applied, which does not display additional structural performances. The use of crimped wire mesh for better construction and fracture resistance, however, expects to have some reinforcement effects. Particularly, it is also expected that the repair of bottom part in structures built between bridges like irrigation structures results in the increase of flexural resistance. Therefore, this study is intended to perform the repair using crimp wire mesh and examine strength depending on the repair section and depth. For this, a slab with 150 mm in depth, 3,000 mm in length and 600 mm in width and total 8 objects to experiment such as upper part, upper whole, bottom part, bottom whole and crimp wire mesh reinforced are manufactured to perform flexural performance. The results of the analysis show that yield strength and failure load increase as the depth of repair materials in the experiment reinforced with crimp wire mesh get bigger. In the same condition, repair of bottom part is able to increase internal force of bending force. Besides, the results show that partial repair of structures under bending force cannot produce flexural performance. Consequently, the repair method with crimp wire mesh results in the increase of flexural resistance.
철근콘크리트 구조물의 수명 연장 및 기능 보완을 위하여 콘크리트 면의 보수를 실시할 경우 일반적으로 구조적 내력을 고려하지 않는다. 특히, 표면박락 등의 보수에는 단순하게 모르타르 도포만을 이용하여 보수가 완료되므로 별도의 구조적인 보강 성능을 발휘하지 않는다. 그러나 시공성의 향상 및 균열의 억제를 위하여 철망 등의 재료를 사용할 경우 일정부분 보강의 효과를 얻을 수 있을 것으로 예상되며, 특히, 수로 구조물과 같이 교각 간에 놓여지는 구조요소의 경우 하부면의 보수를 실시할 경우 휨 저항성의 증가를 기대할 수 있다. 따라서 본 연구에서는 크리프 철망에 의한 보수를 실시하고 보수 부위 및 보수 두께에 따른 보강 성능을 확인하고자 하였다. 이를 위하여 두께 150mm, 길이 3,000mm, 너비 600mm 슬래브를 제작하고, 상부 부분 보수, 상부 전면 보수, 하부 부분 보수, 하부 전면 보수, 크림프 철망 보강 유무 등 총 8개 실험 유형을 선택하고 이에 대한 휨 보강 성능 실험을 실시하였다. 분석 결과, 크림프 철망을 보강한 실험체에서 보수 재료의 두께가 증가할수록 항복하중 및 파괴하중은 높아지는 것으로 나타났으며, 동일 조건일 경우 하부면의 보수가 휨 하중에 대한 내력을 증가시킬 수 있는 것으로 나타났다. 또한, 휨 하중을 받는 구조물 중 부분 보수만을 실시할 경우 휨 보강 성능은 기대하기 어려운 것으로 나타났다. 결론적으로 크림프 철망에 의한 보수공법 적용 시 휨 저항성의 증가가 있는 것을 알 수 있었다.