초록
구조물의 성능평가에 대한 관심이 높아지면서 비파괴 검사 기술에 대한 요구는 계속 증가하고 있다. 이 중에서 전자파법을 이용한 비파괴 검사 기술은 콘크리트 구조물의 균열 탐사에 유용하다고 입증되어 왔고 탄소섬유 (FRP)로 보강된 콘크리트 구조물의 계면 박리를 탐사하는데도 효율적으로 쓰일 수 있을 것으로 예상되었다. 또한 초음파법을 이용한 비파괴 검사 기술도 적용 가능할 것으로 예상되었다. 이번 연구의 목적은 전자기파법 및 초음파법을 이용하여 FRP로 보강된 콘크리트 구조물의 박리를 탐사하기 위한 신뢰성 있는 기술을 개발하는데 있다. 기초 실험을 위하여 스티로폼을 이용하여 인위박리 콘크리트 보강시편을 제작하였고 측정을 실시하였다. 전자기파법을 이용한 연구에서는 기존 안테나 대신에 중심 주파수 15 GHz, 대역폭 10 GHz의 성능을 가진 혼 안테나를 사용하였고 초음파법을 이용한 연구에서는 콘크리트 균열용 상용 장비인 TR-300에 박리측정용 탐촉자를 사용하여 측정을 실시하였다. 두 가지 방법 모두 박리의 유무를 판별하는데 성공하였고 더욱 정밀한 결과를 위하여 향후 연구 방향을 제시하였다.
With a growing concern about the state of infrastructure worldwide, the demand for the development of reliable nondestructive testing techniques (NDT) is ever increasing. Among possible NDT techniques, microwave method is proven to be effective in fast and non-contact inspection of concrete structures and inclusions inside concrete. It is also found that the microwave method has a potential in detecting the delamination between fiber reinforced polymers (FRP) plate and concrete. On the other hand, ultrasonic method can be another way to find the delamination. In this paper, the research work needed for the development of a reliable microwave method and ultrasonic method is studied in the measurements of concrete specimens reinforced with FRP. Concrete specimens are made with FRP and artificial delamination inside. A microwave measurement system with hom antennas with high center frequency and broad frequency bandwidth are used to image inside concrete specimens for the detection of debonding between concrete and FRP. Also, ultrasonic method is used for the same condition. Both results are compared with each other.