Abstract
The main purpose of this study is to investigate the coordinate transformation based on two different systems between local geodetic datum(tokyo datum) and international geocentric datum(new Korea geodetic datum). For this purpose, three methods were used to determine seven parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. Also, we adopted multiple regression equation method to convert from Tokyo datum to KTRF. We used 935 control points as a common points and applied gross error analysis for detecting the outlier among those control points. The coordinate transformation was carried out using similarity transformation applied the obtained seven parameters and the precision of transformed coordinate was evaluated about 9,917 third or forth order control points. From these results, it was found that Bursa-Wolf model and Molodensky-Badekas model are more suitable than other for the determination of transformation parameters in Korea. And, transforming accuracy using MRE is lower than other similarity transformation model.
본 연구의 주요 목적은 서로 다른 측지기준계인 동경측지계와 세계측지계간의 좌표 변환을 위한 연구이다. 이를 위하여 Bursa-Wolf 모델, Molodensky-Badekas 모델 및 Veis 모델을 이용하여 7변환 계수를 결정하였다. 또한 동경데이텀으로부터 세계측지계로 변환하기 위한 다중회귀식 방법도 적용하였다. 공통점 중에서 비상사성인 과대 오차인 점을 분석하고 제거하여 935점의 국가기준점 성과를 변환 계수 결정을 위한 공통점으로 이용하였다. 각 모델별로 결정한 변환 계수를 적용하여 상사 변환에 의한 3, 4등 삼각점 9,917점에 대한 좌표변환을 수행하였으며 변환 정확도를 평가하였다. 그 결과, Bursa-Wolf 모델과 Molodensky-Badekas 모델을 이용하여 결정한 변환 계수가 Veis 모델에 비하여 더 적합하다는 것을 알 수 있었다. 다중회귀식에 의한 변환 정확도는 상사 변환 모델보다는 다소 저하되는 경향을 보였다. 변환 계수의 추정 정밀도와 변환 정확도 및 변환 잔차의 패턴을 분석한 결과, 최적의 국가 좌표변환 모델은 Molodensky-Badekas 모델이라고 판단된다.