한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제17권12호
  • /
  • Pages.1179-1183
  • /
  • 2007
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

생체모방 종이작동기(electro-active paper)의 전기기계적인 구동 시뮬레이션

Electromechanical Simulation of Cellulose Based Biomimetic Electro-Active Paper

  • 장상동 (인하대학교 대학원 기계공학과) ;
  • 김재환 (인하대학교 기계공학과) ;
  • 김흥수 (인하대학교 기계공학과)
  • 발행 : 2007.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Electro-Active paper(EAPap) is a new smart material that has a potential to be used in biomimetic actuator and sensor. It is made by cellulose that is abundant material in nature. EAPap is fascinating with its biodegradability, lightweight, large displacement, high mechanical strength and low actuation voltage. Actuating mechanism of EAPap is known to be the combined effects of ion migration and piezoelectricity. However, the electromechanical actuation mechanisms are not yet to be established. This paper presents the modeling of the actuation behavior of water infused cellulose samples and their composite dielectric constants calculated by Maxwell-Wagner theory. Electro-mechanical forces were calculated using Maxwell stress tensor method. Bending deflection was evaluated from simple beam model and compared with experimental observation, and which result in good correlation with each other.

키워드

참고문헌

  1. Bar-Cohen Y., 2001, 'Electroactive Polymer (EAP) Actuators as Artificial Muscles', SPIE press, Washington
  2. Yun, S., Kim, J., Otmaises, Z., Bae, S. 'Conductive Polymer Coated Electro-active Paper(EAPap)', Transactions of the Korean society for Noise and Vibration Engineering, Vol. 5, No.9, pp.1077-1083 https://doi.org/10.5050/KSNVN.2005.15.9.1077
  3. Bar-Cohen Y., 2002, 'Electro-active Polymers: Current Capabilities and Challenges', Prec. SPIE Smart Structures and Material, Vol. 4695, pp.1-7
  4. Kim, J., Yang, S. Y., Song, K. D., Jones, S. and Choi, S. H., 2006, 'Microwave Power Transmission Using a Flexible Rectenna for Microwave-powered Aerial Vehicles', Smart Material and Structures, Vol. 15, pp.1243-1248 https://doi.org/10.1088/0964-1726/15/5/012
  5. Kim, J., Yun, S. and Ounaies, Z., 2006, 'Discovery of Cellulose as a Smart Material', Macromolecules, Vol. 39, pp.4202-4206 https://doi.org/10.1021/ma060261e
  6. Jones, T. B., 1995, 'Electromechanics of Particles', Cambridge University Press, New York
  7. Yang, C., Goh, S., Isabel, R., Youcef-Toumi K. and Lam, Y. C., 2006, 'Generation of Dielectro-phoretic Force under Uniform Electric Field,' Proc. Innovation in Manufacturing Systems and Technology
  8. Bristow, A. J. and Kolseth, P., 1986 'Paper Structure and Properties,' MARCEL DEKKER, New York
  9. Kim, J., Kang, Y. and Yun, S., 2007, 'Force Measurement of Electro-active Paper Actuators by Micro-balance', Sensors and Actuators A, Vol. 133, No.2, pp. 401-406 https://doi.org/10.1016/j.sna.2006.04.019
  10. Nemat-Nesser S., 2002, 'Micromechanics of Actuation of Ionic Polymer-metal Composites', Journal of Applied Physics, Vol. 92, No.5, pp. 2899-2915 https://doi.org/10.1063/1.1495888