DOI QR코드

DOI QR Code

EFFECT OF COMPLIANCE ON NEWMARK-TYPE RIGID BLOCK DEFORMATION ANALYSIS

Newmark-방식 강체블럭 변위해석에 대한 유연도의 영향

  • Kim, Jin-Man (Dept. of Civil Engrg., School of Civil and Environmental Engrg., Pusan National University)
  • Published : 2007.12.31

Abstract

This study investigates the effect of spatial averaging and compliance taken account of in the analysis of earthquake-induced permanent deformation of slopes. At present, the rigid block analysis originally proposed by Newmark is widely used in the deformation analysis, mainly because of its computational efficiency. This type of approach, however, adopts the so-called decoupled approach, in which seismic response and deformation analyses are carried out separately. Original Newmark block analysis assumes the potential sliding mass to be noncompliant, and has been criticized to be potentially unconservative. This paper reviews the impact of the noncompliance assumption of the potential sliding mass in the Newmark-type analysis. The gross effects of earthquake shaking on the potential sliding mass are estimated by spatial averaging method and analyzed in frequency domain. The results indicate that there is a simple criterion that can be used to determine the level of compliance of the potential sliding mass.

지진으로 인해 사면에 발생한 영구적 변형 계산시 고려된 공간평균과 유연도의 영향을 조사하였다. 현재 변위계산에는 Newmark이 제안한 강체블럭해석기법이 이 기법의 효율적인 계산능력으로 인해 광범하게 사용되고 있다. 그러나 이 해석기법은 지진응답해석과 변위해석을 별도로 수행하는 소위 분리해석법을 채택하고 있다. 당초의 Newmark 해석기법은 활동토사를 강성체로 가정했으며 이로 인하여 비보수적 결과가 도출될 수 있다는 비판을 받아왔다. 본 논문은 Newmark-형식의 해석에서 강성체 가정의 영향을 검토하였다. 활동토사에 작용하는 지진하중의 전체 효과를 공간평균기법을 사용하여 평가하였으며 그 결과를 주파수 영역에서 분석하였다. 해석결과로부터 활동토사의 유연도 수준을 결정하는 경우 사용할 수 있는 단순한 지표를 제시하였다.

Keywords

References

  1. Bray, J. D., Augello, A. J., Leonards, G. A., Repetto, P. C., and Byrne, R. J. (1995), 'Seismic Stability Procedures for Solid-Waste Landfills', Journal of Geotechnical and Geoenvironmental Engineering, Vol.121, No.2, pp.139-151 https://doi.org/10.1061/(ASCE)0733-9410(1995)121:2(139)
  2. Bray, J. D., Augello, A. J., Leonards, G. A., Repetto, P. C., and Byrne, R. J. (1996), 'Closure to Seismic Stability Procedures for Solid-Waste Landfills', Journal of Geotechnical and Geoenvironmental Engineering, Vol.122, No.11, pp.952-954 https://doi.org/10.1061/(ASCE)0733-9410(1996)122:11(952)
  3. Bray, J. D., and Rathje, E. M. (1998), 'Earthquake-induced displacements of solid-waste landfills', Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.124, No.3, pp.242 -253 https://doi.org/10.1061/(ASCE)1090-0241(1998)124:3(242)
  4. Chopra, A. K. (1966), Earthquake Effects on Dams, Ph.D. Dissertation, University of California at Berkeley, California
  5. Chopra, A. K. (1967), 'Earthquake Response of Earth Dams', Journal of the Soil Mechanics and Foundation Engineering Division, ASCE, 93(5M2), pp.65-81
  6. Elton, D. J., Shie, C. F., and Hadj-Hamou, T. (1991), 'One- and Two-Dimensional Analysis of Earth Dams', Proceedings, Second International Conference on Recent Advancements in Geotechnical Earthquake Engineering and Soil Dynamics, St. Louis, Mo, pp.1043 -1049
  7. Franklin, A. G., and Chang, F. K. (1977), Earthquake Resistance of Earth and Rock-Fill Dams, Soils and Pavements Laboratory, U. S. Army Engineer Waterways Experiment Station, Vicksburg, Mississippi
  8. Gazetas, G., and Uddin, N. (1994), 'Permanent Deformation on Preexisting Sliding Surfaces in Dams', Journal of Geotechnical Engineering Division, ASCE, Vol.120, No.11, pp.2041-2061 https://doi.org/10.1061/(ASCE)0733-9410(1994)120:11(2041)
  9. Idriss, I. M., Lysmer, J., Hwang, R., and Seed, H. B. (1973), QUAD-4-A Computer Program for Evaluating the Seismic Response of Soil Structures by Variable Damping Finite Element procedures, EERC Report No. EERC73-16, University of California at Berkeley, California
  10. Kramer, S. L., and Smith, M. W. (1997), 'Modified Newmark Model for Seismic Displacements of Compliant Slopes', Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.123, No.7, pp.635-644 https://doi.org/10.1061/(ASCE)1090-0241(1997)123:7(635)
  11. Lin, J. S., and Whitman, R. V. (1983), 'Decoupling Approximation in the Evaluation of Earthquake-Induced Plastic Slip in Earth Dams', Earthquake Engineering and Structural Dynamics, Vol.11, pp.667-678 https://doi.org/10.1002/eqe.4290110506
  12. Ling, H. I., and Leshchinsky, D. (1997), 'Seismic Stability and Permanent Displacement of Landfill Cover Systems', Journal of Geotechnical and Geoenvironmental Engineering, Vol.123, No.2, pp.113-122 https://doi.org/10.1061/(ASCE)1090-0241(1997)123:2(113)
  13. Makdisi, F. I., and Seed, H. B. (1978), 'Simplified Procedure for Estimating Dam and Embankment Earthquake-Induced Deformations', Journal of Geotechnical Engineering Division, ASCE, Vol.104 (GT7), pp.849-867
  14. Matasovic, N., Kavazanjian, J., E., and Giroud, J. P. (1998), 'Newmark Seismic Deformation Analysis for Geosynthetic Covers', Geosynthetics International, Vol.5 (1-2), pp.237-264 https://doi.org/10.1680/gein.5.0120
  15. Newmark, N. M. (1965), 'Effects of Earthquakes on Dams and Embankments', Geotechnique, Vol.15, No.2, pp.139-160 https://doi.org/10.1680/geot.1965.15.2.139
  16. Rathje, E. M. (1997), Nonlinear and Two Dimensional Seismic Response Studies of Solid-Waste Landfills, Ph.D. Dissertation, University of California, Berkeley, California
  17. Schnabel, P. B., Lysmer, J., and Seed, H. B. (1972), SHAKE A Computer Program for Earthquake Response Analysis of Horizontally Layered Sites, EERC 72-12, Earthquake Engineering Research center, University of California, Berkeley
  18. Seed, H. B., and Goodman, R. E. (1964), 'Earthquake Stability of Slopes of Cohesionless Soils', Journal of Soil Mechanics and Foundation Engineering Division, ACSE, Vol.90 (SM6), pp.43-73
  19. Seed, H. B., and Martin, G. R. (1966), 'The Seismic Coefficient in Earth Dam Design', Journal of Soil Mechanics and Foundation Engineering Division, ACSE, Vol.92 (SM3), pp.25-58
  20. Yan, L. (1996), 'Seismic Response of a Block on an Inclined Plane to Vertical and Horizontal Excitation Acting Simultaneously', Proceedings of the 11th Conference on Engineering Mechanics, ASCE, Fort Lauderdale, Florida, pp.1110-1113