DOI QR코드

DOI QR Code

Investigation of Heat Transfer in Microchannel with One-Side Heating Condition Using Numerical Analysis

수치 해석을 이용한 단일 마이크로채널의 단면 가열 조건의 열전달 특성에 관한 연구

  • Published : 2007.12.01

Abstract

The microchannel heat sink is promising heat dissipation method far high density electronic devices. The cross-sectional shape of MEMS based microchannel heat sink is limited to triangular, trapezoidal, and rectangular due to their fabrication method. And heat is added to one side surface of heat source. Therefore, those specific conditions make some complexity of heat transfer in microchannel heat sink. Though many previous research of conjugate heat transfer in microchannel was conducted, most of them did not consider heat loss. In this study, numerical investigation of conjugate heat transfer in rectangular microchannel was conducted. The method of heat loss evaluation was verified numerically. Heat distribution was different for each wall of rectangular microchannel due to thermal conductivity and distance from heat source. However, the ratio of heat from each channel wall was correlated. Therefore, the effective area correction factor could be proposed to evaluate accurate heat flux in one side heating condition.

Keywords

References

  1. Tuckerman, D. B. and Pease, R. F. W., 1981, 'Highperformance Heat Sinking for VLSI,' IEEE Electron Device Letters, Vol. 2, No. 5, pp. 126-129 https://doi.org/10.1109/EDL.1981.25367
  2. Copeland, 1995, 'Manifold Microchannel Heat Sink : Analysis and Optimization,' Thermal Science and Engineerging, Vol. 3, No. 1, pp. 7-12
  3. Fedorov, A. G. and Viskanta, R., 2000, 'Three- Dimensional Conjugate Heat Transfer in the Microchannel Heat Sink for Electronic Packaging,' Int. Heat and Mass Transfer, Vol. 43, pp. 399-415 https://doi.org/10.1016/S0017-9310(99)00151-9
  4. Qu, W. and Mudawar, I., 2002, 'Analysis of Three- Dimensional Heat Transfer in Microchannel Heat Sinks,' Int. Heat and Mass Transfer, Vol. 45, pp. 3973-3985 https://doi.org/10.1016/S0017-9310(02)00101-1
  5. Toh, K. C., Chen, X. Y. and Chai, J. C., 2002, 'Numerical Computation of Fluid Flow and Heat Transfer in Microchannels,' Int. Heat and Mass Transfer, Vol. 45, pp. 5133-5141 https://doi.org/10.1016/S0017-9310(02)00223-5
  6. Li, J., Peterson, G. P. and Cheng, P., 2004, 'Three- Dimensional Analysis of Heat Transfer a Micro-heat Sink with Single Phase Flow,' Int. Heat and Mass Transfer, Vol. 47, pp. 4215-4231 https://doi.org/10.1016/j.ijheatmasstransfer.2004.04.018
  7. Li, J. and Peterson, G. P., 2007, '3-Dimensional Numerical Optimization of Silicon-based High Performance Parallel Microchannel Heat Sink with Liquid Flow,' Int. Heat and Mass Transfer, in Press https://doi.org/10.1016/j.ijheatmasstransfer.2007.01.019
  8. Lee, P. S., Garimella, S. V. and Liu, D., 2005, 'Investigation of Heat Transfer in Rectangular Microchannels,' Int. Heat and Mass Transfer, Vol. 48, pp. 1688-1704 https://doi.org/10.1016/j.ijheatmasstransfer.2004.11.019
  9. Lee, P. S. and Garimella, S. V., 2006, 'Thermally Developing Flow and Heat Transfer in Rectangular Microchannels of Different Aspect Ratios,' Int. Heat and Mass Transfer, Vol. 49, pp. 3060-3067 https://doi.org/10.1016/j.ijheatmasstransfer.2006.02.011
  10. Huh, C. and Kim, M. H., 2006, 'Flow Boiling Heat Transfer in a Horizontal Rectangular Microchannel,' KSME B, Vol. 30, No. 11, pp. 1043-1050 https://doi.org/10.3795/KSME-B.2006.30.11.1043
  11. Incropera, F.P. and DeWitt, D.P., 1981, 'Fundamentals of Heat and Mass Transfer,' 4th ED. John Willey & Sons, pp. 493-498
  12. FLUENT 6.2 User's Guide, Fluent Inc.
  13. Shih, F.S., 1967, 'Laminar Flow in Axisymmeric Conduits by a Rational Approach,' Can. J. Chem. Eng., Vol. 45, pp. 285-294 https://doi.org/10.1002/cjce.5450450507
  14. Shah, R.K. and London, A.L., 1978, 'Laminar Flow Forced Convection in Ducts,' Academic Press
  15. Jones, R., Pate, D. and Bhavnani, S., 2006, 'Phase Change Thermal Transport in Etched Silicon Microchannel Heat Sinks,' 13th Int. Heat Transfer Conference, MPH-28