DOI QR코드

DOI QR Code

Real-Time Monitoring and Analysis of Power Systems with Synchronized Phasor Measurements

  • Kim, Hong-Rae (Dept. of Electronic Information Engineering, Soonchunhyang University)
  • Published : 2007.11.30

Abstract

State estimators are used to monitor the operating states of power systems in modern EMS. It iteratively calculates the voltage profile of the currently operating power system with voltage, current, and power measurements gathered from the entire system. All the measurements are usually assumed to be obtained simultaneously. It is practically impossible, however, to maintain the synchronism of the measurement data. Recently, phasor measurements synchronized via satellite are used for the operation of these power systems. This paper describes the modified state estimator used to support the processing of synchronized phasor measurements. Synchronized phasor measurements are found to provide synchronism of measurement data and improve the accuracy/redundancy of the measurement data for state estimation. The details of the developed state estimation program and some numerical results of operation are presented.

Keywords

References

  1. B. Bhargava, 'Synchronized Phasor Measurement System Project at Southern California Edison Co.,' IEEE Power Engineering Society Summer Meeting, Vol. 1, pp. 16-22, 1999
  2. R. Burnett et al., 'Power System Applications for Phasor Measurement Units,' IEEE Computer Applications in Power, Vol. 7, Issue 1, pp. 8-13, 1994
  3. T. Cease and B. Feldhaus, 'Real Time Monitoring of the TVA Power Systems,' IEEE computer Applications in Power, Vol. 7, Issue 3, pp. 47-51, 1998
  4. B. Fardanesh et al., 'Multifunctional Synchronized Measurement Network,' IEEE Computer Applications in Power, Vol. 11, Issue 1, pp, 26-30, 1998
  5. C. Liu, 'Phasor Measurement Applications in Taiwan,' IEEE Transmission and Distribution Conf. and Exhibition, Vol. 1, pp. 490-493, 2002 https://doi.org/10.1109/TDC.2002.1178430
  6. A. Phadke, 'Synchronized Phasor Measurements - A Historical Review,' IEEE Transmission and Distribution Conf. and Exhibition, Vol. 1, pp. 476-479, 2002 https://doi.org/10.1109/TDC.2002.1178427
  7. G. Denegri et al., 'A Security Oriented Approach to PMU Positioning for Advanced Monitoring of a Transmission Grid,' Proc. of PowerCon 2002, Vol. 2, pp. 798-803, 2002
  8. R. Schulz, L. Vanslyck and S. Horowitz, 'Applications of Fast Phasor Measurements on Utility Systems,' Power Industry Application Conference, pp. 49-55, 1989
  9. J. Wu et al., 'Dynamic Monitoring and Control System Based on Synchronized Phasor Measurement in Heilongjian Eastern Power System,' IEEE Power Engineering Society Winter Meeting, Vol. 3, pp. 1689-1693, 2000
  10. Dong-Hoon Jeon et al., 'Application & Development of a Monitoring & Analysis for On-line Power System stability using CPS,' Proceeding of the KIEE Summer Annual Conference, 2003
  11. Tae Yong Song et al,. 'Application and Experience of State Estimation in Korea Power System,' Proceeding of the KIEE Annual Summer Conference, 2003
  12. Jin-Hong Jeon et al., 'The Development of Synchronized Phasor measurement Device for Real-Time Power System Control,' Proceeding of the KIEE Annual Summer Conference, 2000
  13. Jae-Hoon Kim et al., 'Optimal Placement of the Measurement Units in Power System,' Trans. of KIEE, Vol. 49A, No. 7, pp. 313-322, JUL. 2000
  14. Kyung-Keuk Yi et al., 'Measurement of Phasor Angles of Power System Using Synchronized Phasor Measurement System,' Proceeding of the KIEE Annual Autumn Conference, 2000
  15. A. Abur and A. Exposito, Power System State Estimation, Marcel Dekker, Inc., 2004
  16. Hongrae Kim et al., 'Identification of Parameter Errors in Electric Power Systems by WLAV State Estimation,' Trans. KIEE, Vol. 49A, No. 9, pp. 451-458, SEP. 2000